This study examines the safety effects of the improvements made on multi-lane arterials. The improvements were divided into two categories 1) corridor level improvements, and 2) intersection improvements. Empirical Bayes method, which is one of the most accepted approaches for conducting before-after evaluations, has been used to assess the safety effects of the improvement projects. Safety effects are estimated not only in terms of all crashes but also rear-end (most common type) as well as severe crashes (crashes involving incapacitating and/or fatal injuries) and also angle crashes for intersection improvements. The Safety Performance Functions (SPFs) used in this study are negative binomial crash frequency estimation models that use the information on ADT, length of the segments, speed limit, and number of lanes for corridors. And for intersections the explanatory variables used are ADT, number of lanes, speed limit on major road, and number of lanes on the minor road. GENMOD procedure in SAS was used to develop the SPFs. Corridor SPFs are segregated by crash groups (all, rear-end, and severe), length of the segments being evaluated, and land use (urban, suburban and rural). The results of the analysis show that the resulting changes in safety following corridor level improvements vary widely. Although the safety effect of projects involving the same type of improvement varied, the overall effectiveness of each of the corridor level improvements were found to be positive in terms of reduction in crashes of each crash type considered (total, severe, and rear-end) except for resurfacing projects where the total number of crashes slightly increased after the roadway section is resurfaced. Evaluating additional improvements carried out with resurfacing activities showed that all (other than sidewalk improvements for total crashes) of them consistently led to improvements in safety of multilane arterial sections. It leads to the inference that it may be a good idea to take up additional improvements if it is cost effective to do them along with resurfacing. It was also found that the addition of turning lanes (left and/or right) and paving shoulders were two improvements associated with a project�s relative performance in terms of reduction in rear-end crashes. No improvements were found to be associated with a resurfacing project�s relative performance in terms of changes in (i.e., reducing) severe crashes. For intersection improvements also the individual results of each project varied widely. Except for adding turn lane(s) all other improvements showed a positive impact on safety in terms of reducing the number of crashes for all the crash types (total, severe, angle, and rear-end) considered. Indicating that the design guidelines for this work type have to be revisited and safety aspect has to be considered while implementing them. In all it can be concluded that FDOT is doing a good job in selecting the sites for treatment and it is very successful in improving the safety of the sections being treated although the main objective(s) of the treatments are not necessarily safety related.
| Identifer | oai:union.ndltd.org:ucf.edu/oai:stars.library.ucf.edu:etd-5060 |
| Date | 01 January 2009 |
| Creators | Devarasetty, Prem Chand |
| Publisher | STARS |
| Source Sets | University of Central Florida |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Electronic Theses and Dissertations |
Page generated in 0.0023 seconds