Modern day structures are reaching higher, spanning longer and undergoing new design methods. In addition to regular loads, it is becoming increasingly important to consider the potential risks of intentional and accidental explosions on structures. In the case of reinforced concrete buildings, critical elements such as beams and columns must de designed with sufficient strength and ductility to mitigate against the effects of blast loads to safekeep the public and prevent progressive structural collapse. Recent advancements in structural materials have led to the development of ultra-high-performance concrete (UHPC) with high compressive strength, tensile resistance, toughness and energy absorption capacity, properties which are ideal for blast protection of structures. Combining UHPC with high-performance steels, such as and high strength reinforcement is another potential solution to enhance the blast resilience of structures. This experimental and analytical research program investigates the advantages of combining high performance materials to increase the blast capacity of reinforced concrete beams. The experimental program includes tests on 21 beam specimens, fourteen of which are subjected to extreme blast loading using the University of Ottawa shock-tube, with seven companion specimens tested statically. Parameters investigated include: effect of concrete type (NSC vs. UHPC), effect of steel reinforcement type (NSR vs. HSR), effect of longitudinal reinforcement ratio, effect of fiber type/content and effect of transverse reinforcement on structural performance under static and dynamic loads. The experimental study includes three series having specified material combinations as follows: series 1 (NSC & NSR), series 2 (UHPC & NSR) and series 3 (UHPC & HSR). Each dynamically tested beam specimen is subjected to gradually increasing blast shockwaves until reaching failure. Performance assessment criteria included; maximum and residual displacements, overall blast resistance and resistance to secondary fragmentation.
Results show that the specimens detailed with UHPC can resist greater blast loads with reduced mid-span displacement and debris generation when compared to beams built with conventional concrete. The combination of UHPC and high strength reinforcement further enhances blast performance and delays failure as both high strength materials balance themselves for optimum efficiency. Similarly, for specimens subjected to static loading, the use of UHPC increased the maximum load resisted by the beams, although failure mode alters from concrete crushing to rebar rupture. The combination of UHPC and high strength reinforcement further heightens beam resistance, at the expense of reduced specimen ductility.
The analytical component of this thesis presents an analysis program called UO Resistance which is capable of predicting structural element resistance curves and conducting a dynamic inelastic single degree of freedom (SDOF) analysis of members subjected to blast loads. Resistance curves generated using UO Resistance were compared to data obtained through static testing and were found to effectively predict specimen response. Similarly, dynamic analysis methods implemented in UO Resistance prove to be effective at predicting specimen response under blast load. Additionally, a sensitivity analysis was performed to evaluate the effect of various modeling parameters on the static and SDOF dynamic predictions of specimen response.
| Identifer | oai:union.ndltd.org:uottawa.ca/oai:ruor.uottawa.ca:10393/37093 |
| Date | January 2018 |
| Creators | Guertin-Normoyle, Corey |
| Contributors | Aoude, Hassan |
| Publisher | Université d'Ottawa / University of Ottawa |
| Source Sets | Université d’Ottawa |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0025 seconds