Rivers are considered as one of the most important surface water resources on the earth. During the time, most of the rivers on the earth experienced evolution and changes. River bends and confluences are one of the common cases in most rivers. There is a significant impact of the flow on the cross-sectional profile of river bends and confluences.
Secondary currents are one of the important features that characterize flow in river bends and confluences. In such currents, fluid particles follow a helical path instead of moving nearly parallel to the axis of the channel. The local imbalance between the vertically varying centrifugal force and the cross-stream pressure gradient results in generating the secondary flow and raising a typical motion of the helical flow. Several studies, including experimental or mathematical, have been conducted to examine flow characteristics in curved open channels, river meanders, or confluences. In this research, the influence of secondary currents is studied on the elevation of water surface and the hydraulic structures in channel bends and confluences by employing a 3D OpenFOAM numerical model.
The research implements a 3D OpenFOAM numerical model to simulate the horizontal distribution of the flow. In addition, the progress in unraveling and understanding the bend and confluent dynamics is discussed. The finite volume method in OpenFOAM software is used to simulate and examine the behavior of the secondary current. Thereafter, a comparison between the experimental data and a numerical model is conducted. Two sets of experimental data are used as the dataset for these two experiments are complete and validated; the data provided by Rozovskii (1961) for a sharply curved channel, and the dataset provided by Shumate (1998) for a confluent channel.
Two solvers in OpenFOAM software were selected to solve the problem regarding the experiment: InterFoam and PisoFoam. InterFoam is a transient solver for incompressible flow that is used with open channel flow with Free Surface Model. PisoFoam is a transient solver for incompressible flow that is used with closed channel flow and Rigid-Lid Model. Various turbulence models (i.e., Standard k-ε, Realizable k-ε) are applied in the numerical model to assess the accuracy of turbulence models in predicting the behavior of the flow. The accuracies of various turbulence models are examined and discussed.
| Identifer | oai:union.ndltd.org:uottawa.ca/oai:ruor.uottawa.ca:10393/45018 |
| Date | 30 May 2023 |
| Creators | Shaheed, Rawaa |
| Contributors | Mohammadian, Abdolmajid |
| Publisher | Université d'Ottawa / University of Ottawa |
| Source Sets | Université d’Ottawa |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
Page generated in 0.0023 seconds