Return to search

Efeito da temperatura sobre a conversão e o coeficiente global de taxa de reação na absorção de SO2 por calcário em reator de leito fluidizado / not available

Estudou-se o efeito da temperatura na conversão e no coeficiente global de taxa de reação no processo de absorção de SO2 por calcário em reator de leito fluidizado borbulhante atmosférico. O sistema experimental foi constituído por um reator de 160 mm de diâmetro interno e altura de 450 mm e seus periféricos. Os experimentos foram feitos com a introdução de calcário em batelada no leito, fluidizado com ar contendo uma concentração constante e uniforme SO2 e aquecido eletricamente. Utilizou-se granulometria estreita de calcário com diâmetros médios de 545 e 650 &#956m. A areia de quartzo que compunha o leito tinha diâmetro médio de 650 &#956m. Os experimentos foram realizados com bateladas de 50 g de calcário adicionadas ao leito durante o teste, com as demais condições mantidas constantes. As temperaturas utilizadas variaram de 700 a 958°C, a relação entre as velocidades de fluidização e de mínima fluidização foi mantida em 4/1, e fator de fluxo bolha/particulado em torno de 2,6. Os resultados mostraram que a conversão foi relativamente baixa, entre 1,2 e 10,9%, dependendo sobretudo da temperatura utilizada. O coeficiente global de taxa de reação aumentou com a temperatura, atingindo um valor máximo de 500 m/s a 881ºC e decrescendo a partir deste valor. / The effect of temperature in both the conversion and the overall rate of reaction coefficient for the process of SO2 absorption by limestone within a fluidized bed was studied on a bench scale atmospheric bubbling fluidized bed reactor. The reactor had an internal diameter of 160 mm and was 450 mm high. The bed was fluidized with air with a concentration of about 950 ppm of SO2. This mixture was electrically heated. The bed material was quartz sand with a narrow size distribution of around 650 &#956m. Limestone was fed to the bed with narrow sized particles of 545 and 650 &#956m. The experiments were carried out on a batch mode introducing samples of 50 g of limestone into the bed with the other variables kept constant. Process temperatures ranged from 700 to 958°C, the relation between gas fluidization velocity and minimum gas fluidization velocity was fixed at 4/1 and the cross flow factor was around 2.6. The results showed a relatively low conversion of limestone, from 1.2 to 10.9%, depending mostly on temperature. The overall rate of reaction coefficient increased with temperature, reaching a maximum value of 500 m/s at 881°C, and decreasing afterwards.

Identiferoai:union.ndltd.org:usp.br/oai:teses.usp.br:tde-11072018-140732
Date20 November 2000
CreatorsCosta, Manoel Carlos Diniz
ContributorsPagliuso, Josmar Davilson
PublisherBiblioteca Digitais de Teses e Dissertações da USP
Source SetsUniversidade de São Paulo
LanguagePortuguese
Detected LanguagePortuguese
TypeDissertação de Mestrado
Formatapplication/pdf
RightsLiberar o conteúdo para acesso público.

Page generated in 0.0018 seconds