This PhD thesis deals with the design of a CMOS integrated circuit as a readout electronic for the THz bolometric detectors, either semiconductor or high-Tc superconductor. We study a chain of the analog signal processing composed of the differential fixed-gain amplifier for the temperature range of 40 to 400K, as well as of the high dynamic range low-pass active frequency filter. As the optimal amplifier configuration, a feedback-free architecture was selected in order to reach high frequency bandwidth (17MHz for gain 40dB), low quiescent current (Iq=2mA) and high input impedance. In this amplifier, the gain is set in the CMOS structure via two different methods and the accuracy is verified by wide-temperature measurements of the fabricated integrated circuit. Consequently, the behaviour of the frequency filters is examined namely in the stopband, aiming to increase the maximal cut-off frequency. As an outcome, two structures with low influence of real active elements' parameters are designed: improved type-II Sallen-Key and the structure based on the CCII- current conveyor. In the last part, the integrated CCII- with very low output impedance is presented.
Identifer | oai:union.ndltd.org:vtechworks.lib.vt.edu/oai:vtechworks.lib.vt.edu:10919/71492 |
Date | 10 June 2009 |
Creators | Michal, Vratislav |
Contributors | UPMC |
Source Sets | VTechWorks NDLTD ETDs |
Language | English |
Detected Language | English |
Type | Dissertation |
Format | application/pdf, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0019 seconds