Settling time is very important for data acquisition systems because it is the primary factor that defines the data rate for a given error level. Therefore settling time measurement is a crucial test. The goal of the project was to design, test and compare different measurement techniques. Three methods were tested to the accuracies of 0.1% and 0.01%. Also simulations were conducted to explain the parameters that affect the settling behavior. Additionally bench measurements were correlated to simulation results. This report is intended as a guide for settling time measurements.
| Identifer | oai:union.ndltd.org:wpi.edu/oai:digitalcommons.wpi.edu:etd-theses-1736 |
| Date | 05 May 2005 |
| Creators | Kayabasi, Cezmi |
| Contributors | John A. McNeill, Advisor, Donald Richard Brown III, Committee Member, Stephen J. Bitar, Committee Member |
| Publisher | Digital WPI |
| Source Sets | Worcester Polytechnic Institute |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Masters Theses (All Theses, All Years) |
Page generated in 0.0022 seconds