Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"0.18um CMOS"”.
-
A low-power quadrature digital modulator in 0.18um CMOS
… a low-power quadrature digital modulator in 0.18um CMOS is presented with the target system clock speed of 150 MHz. The quadrature digital modulator consists of several key blocks: quadrature direct digital synthesizer (QDDS), pulse shaping filter, interpolation filter and inverse sinc filter. …
-
A 43mW single-channel 4GS/s 4-bit flash ADC IN 0.18um CMOS
… The ADC is designed and fabricated in 0.18um CMOS and operates at 4GS/s. It achieves an effective number of bits (ENOB) of 3.71 (3.14, 2.75) for a 10MHz (0.501GHz, 1.491GHz) signal sampled at 4GS/s (3GS/s, 3GS/s). Differential/integral nonlinearity (DNL/INL) errors are between +/-0.35LSB …
-
A highly linear and low flicker-noise CMOS direct conversion receiver front-end for multiband applications
… architecture for multiband applications in a CMOS technology. The dissertation consists of two parts: One, implementation of a highly linear RF receiver front-end and, two, implementation of a low flicker-noise RF receiver front-end based for direct conversion architecture. For multiband …
-
CMOS Phase Shifter for Conformal Phased Array Beamformer Applications
… based phase shifter is developed using 0.18um CMOS process at S-band frequency to be integrated into a conformal phased array antenna to recover the desired radiation pattern in the entire 360° range. The phase shifter has a variable gain amplifier integrated into the circuit in order to …
-
A Variable High Gain and High Dynamics Range CMOS Phase Shifter for Phased Array Antenna Applications
… The phase shifter was fabricated using 0.18um CMOS process and the measured results showed continuous phase shift of 3030 with 9-dB variable gain at 3.5 GHz. Based on the measured results, a modified phase shifter was proposed and designed which can achieve continuous phase rotation of …
-
Design of RF CMOS Power Amplifier for UWB Applications
… solution which can only be achieved by using CMOS technology. Nevertheless, some of the inherent limitations of CMOS like lower fT of transistors make the design of UWB circuits in CMOS an extremely challenging task. Two proposals- Multi-Band OFDM and Direct-Sequence CDMA have been put before …
-
Delta-Sigma Modulators with Low Oversampling Ratios
… converters. A prototype chip is designed in 0.18um CMOS technology which can operate in three modes by simply changing the resetting clock phases. It can operate as an 8-stage pipeline analog-to-digital (A/D) converter, an 8th-order cascaded delta-sigma modulator, and an 8th-order cascaded …
-
Ultra Low Power IEEE 802.15.4/ZIGBEE Compliant Transceiver
… and area. The chip is fabricated in a standard 0.18um CMOS technology. In the transmit mode, the transmitter chain (Modulator to PA) consumes 25mW, while in the receive mode, the iv receiver chain (LNA to Demodulator) consumes 5mW. The Integer-N Frequency Synthesizer consumes 8.5mW. Other Low …
-
An Energy Efficient Asynchronous Time-Domain Comparator
… time-domain comparator is fabricated in IBM 0.18um CMOS technology in comparison with other two conventional time-domain comparators working at 100kS/s sampling rate and 8-bit resolution. The achieved power consumption of the proposed time-domain comparator is 50nW, which is much lower than …
-
Radio Frequency Low Noise and High Q Integrated Filters in Digital CMOS Processes
… Noise and High Q Integrated Filters in Digital CMOS Processes Zhijie Xiong 149 pages Directed by Dr. Phillip E. Allen Presented in this work is a novel design technique for CMOS integration of RF high Q integrated filters using positive feedback and current mode approach. Two circuits are …
-
A Multiband Low Noise Amplifier for Software Defined Radio Using Switchable Active Shunt Feedback Input Matching
… LNA. The LNA is designed and fabricated in IBM 0.18um CMOS technology. It is made up of dual LC resonant tanks, one to switch between 5.2GHz and 3.5GHz frequency bands and the other, to switch between 2.4GHz and 1.8GHz bands. The input matching of the LNA is achieved using a switchable shunt …
-
Extension of 0.18µm standard CMOS technology operating range to the microwave and millimetre-wave regime
… digital complementary metal oxide semiconductor (CMOS) technology for applications such as wireless local area networks (WLAN), automotive radar and remote sensing. This stems from the existing low cost, well-developed, high yield infrastructure for mass production. The overall aim of this thesis …
-
Τεχνικές ελέγχου ορθής λειτουργίας και διόρθωσης επιδόσεων τηλεπικοινωνιακών ολοκληρωμένων κυκλωμάτων υψηλών συχνοτήτων
… procedures of a typical RF Mixer designed in a 0.18um CMOS technology. Simulation results are obtained and assessed, while comparison with similar conventional methodologies is also provided.
-
An ultra-wideband transceiver for high data rate wireless biotelemetry
… capsule is also proposed and implemented in a 0.18um standard Complementary Metal Oxide Semiconductor (CMOS) process. This transmitter achieved impressive results; realising a data rate of 200Mbps with the low power consumption of 27pJ per pulse and the small area of 0.0126mm2 making it optimum …
-
Equalization and Near-End Crosstalk (NEXT) Noise Cancellation for 20-Gbit/sec 4-PAM Backplane Serial I/O Interconnections
… (MMSE) algorithm. A 0.18-um CMOS 4-tap FIR filter IC was designed and fabricated. The experiment results showed the 20-Gbit/sec 4-PAM and 10-Gbit/sec NRZ signal were successfully equalized for the 20-in FR4 legacy backplane channel. Moreover, the suggested NEXT noise …