Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 38 for “"17-4PH"”.

  1. Analysis of Additively Manufactured 17-4PH Stainless Steel

    Selective laser melting of nitrogen gas atomized 17-4PH stainless results in up to 50% lower yield strength and 600% higher elongation compared to traditionally processed, wrought 17-4PH. This drastic difference in mechanical properties is commonly attributed to the presence of high volume …

    mcmaster Repository record for Analysis of Additively Manufactured 17-4PH Stainless Steel (opens in a new tab)

  2. Nonlinear resonance ultrasonic spectroscopy for characterizing thermal damage in 17-4PH stainless steel

    … reactor pressure vessel steels, thermally aged 17-4 PH stainless steel in different precipitation stages is used to study the effects of CRPs on the measured hysteretic nonlinearity parameter, alpha. These results are compared to propagating wave nonlinear ultrasonic technique results on larger …

    gatech Repository record for Nonlinear resonance ultrasonic spectroscopy for characterizing thermal damage in 17-4PH stainless steel (opens in a new tab)

  3. Material Properties of 17-4PH Stainless Steel Fabricated With Cooling Holes by Atomic Diffusion Additive Manufacturing (ADAM)

    … is to investigate the material properties of 17-4PH stainless steel printed with cooling holes in different build orientations by the Atomic Diffusion Additive manufacturing technique. Samples with film cooling holes printed in different build orientations, with impingement inserts, …

    ucf Repository record for Material Properties of 17-4PH Stainless Steel Fabricated With Cooling Holes by Atomic Diffusion Additive Manufacturing (ADAM) (opens in a new tab)

  4. Electrochemical Study of Corrosion Behavior of Stellite 6 Alloy and 17-4PH Stainless Steel in Amine Solutions

    … the corrosion behavior of Stellite 6 alloy and 17-4PH stainless steel is studied in morpholine, cyclohexylamine and sodium hydroxide solutions at the same pH around 9.5 using electrochemical test methods such as potentiodynamic polarization, cyclic polarization, and EIS in this research. The …

    carleton Repository record for Electrochemical Study of Corrosion Behavior of Stellite 6 Alloy and 17-4PH Stainless Steel in Amine Solutions (opens in a new tab)

  5. Pulverspritzgießen von Metall-Keramik-Verbunden

    … Greifer) jeweils bestehend aus Stahl 17-4PH und ZrO2 (3%Y2O3), im Co-Sinterverfahren unter H2-Atmosphäre bei 1350°C, entwickelt. Schlüssel zur Darstellung schwindungskonformer ZrO2- und Stahl 17-4PH-Formgebungsmassen war der Angleich der Pulverpackungsdichte. Untersucht wurde neben der …

    qucosa-diss

  6. Comparison of Additively Manufactured and Wrought 17-4 PH Stainless Steels in Ultra Low Cycle Fatigue

    … heat-treated and non-heat-treated AM and wrought 17-4PH stainless steel in Ultra Low Cycle Fatigue. To understand ULCF performance differences between the AM and wrought specimens, post fracture microstructure, fractography, surface hardness, and material characterizations are conducted. Results …

    arkansas Repository record for Comparison of Additively Manufactured and Wrought 17-4 PH Stainless Steels in Ultra Low Cycle Fatigue (opens in a new tab)

  7. High-Throughput Tensile Testing Reveals Stochastic Properties in Additively Manufactured Steel

    … stainless steel alloy, commonly known as 17-4PH, produced by two commercial AM vendors using a laser powder bed fusion process, also commonly known as selective laser melting. Using two different commercial powder bed platforms, the vendors produced material that exhibited slightly lower …

    unm Repository record for High-Throughput Tensile Testing Reveals Stochastic Properties in Additively Manufactured Steel (opens in a new tab)

  8. Processing and Characterisation of metallic Materials using the additive Manufacturing Technique based on Plasma Metal Deposition (PMD)

    … interés en ingeniería (aceros inoxidables 316L y 17-4PH, aleaciones de níquel como el Hastelloy C-22, aleación de magnesio AZ91 y la aleación de titanio Ti-6Al-4V), analizando la forma y procedencia del material de aporte (hilo frente a polvo; polvos atomizados por gas frente a agua), la …

    sevilla Repository record for Processing and Characterisation of metallic Materials using the additive Manufacturing Technique based on Plasma Metal Deposition (PMD) (opens in a new tab)

  9. Load Deformation Test of Metal Brackets : A Comparative Study

    … of raw materials (310SS, 316L, 303SE, 3038, and 17-4PH), 3 types of slot torque degree (0 degree, 7 degree, and 12 degree), and 4 types of wing design (mini twin, single, regular twin, and modified twin). All brackets were tested using arch wire torque test developed by Flores. An analysis of …

    loma-linda Repository record for Load Deformation Test of Metal Brackets : A Comparative Study (opens in a new tab)

  10. The effect of heat treatment/irradiation on the microstructure and properties of iron-based reactor alloys

    … changes within two Fe-Cr based steels, 17-4PH steel and T91 steel, subject to heat treatment and irradiation.</p> <p>17-4PH steel is heat treated at two different temperatures, 480 °C and 590 °C for times up to 1000 hours and 24 hours respectively. The sequence of microstructural changes …

    oxford Repository record for The effect of heat treatment/irradiation on the microstructure and properties of iron-based reactor alloys (opens in a new tab)

  11. Experimental evaluation of process-property relationships in bound powder extrusion based metal additive manufacturing

    … I undertook a comprehensive evaluation of 17-4PH stainless steel components produced via the Markforged MetalX system, printing specimens in 0°, 45°, and 90° orientations relative to the build direction. These were subjected to tensile testing, hardness measurements, surface roughness …

    hawaii Repository record for Experimental evaluation of process-property relationships in bound powder extrusion based metal additive manufacturing (opens in a new tab) Embargoed until 2027-09-24

  12. Producing Ruthenium and Palladium Doped Stainless Steel by Field Assisted Sintering

    … produced using water atomised 316L and 17-4PH stainless steel doped with 0.5 wt.\% Ru and Pd, respectively. Sintering optimisation was carried out by varying the processing temperature and time. Corrosion performance was evaluated by electrochemical testing in H2SO4 and immersion testing …

    whiterose Download PDF for Producing Ruthenium and Palladium Doped Stainless Steel by Field Assisted Sintering (opens in a new tab)

  13. Mechanical properties and microstructure evolution of 17-4 PH stainless steel processed by laser-powered bed fusion.

    … on mechanical properties and microstructures of 17-4PH stainless steel using gas and water-atomized powders. The results demonstrate the feasibility of using water-atomized powders as starting raw materials instead of typically used gas-atomized powders to fabricate parts in the L-PBF process at …

    louisville Repository record for Mechanical properties and microstructure evolution of 17-4 PH stainless steel processed by laser-powered bed fusion. (opens in a new tab)

  14. Impact of Interleaved Thermally Conductive Material with Conformal Fluid Channels on Tooling Thermal Response

    … with the process-structure-property analysis of 17-4PH, pure copper, and a mixture of the two at varied ratios. The investigation continued by evaluating the interface between the two materials when 17-4PH was deposited on top of pure copper and a copper mixture. The investigation was completed …

    gatech Repository record for Impact of Interleaved Thermally Conductive Material with Conformal Fluid Channels on Tooling Thermal Response (opens in a new tab)

  15. Study of the influence of powder and binders characteristics on rheological behavior and moldability properties of low-pressure powder injection molding stainless steel feedstocks

    … feedstocks using water-atomized stainless steel 17-4PH metal powder under LPIM is investigated by variations of solid loading and particle size distribution of 3 μm and 10 μm. Since LPIM’s feedstock is exposed to high stringent characteristics, the study emphasizes on powder and binder system in …

    ets-quebec Download PDF for Study of the influence of powder and binders characteristics on rheological behavior and moldability properties of low-pressure powder injection molding stainless steel feedstocks (opens in a new tab)

  16. In situ stress measurement by neutron diffraction

    … were determined for 7079-T6 aluminum alloy, 17-7PH stainless steel, 17-4PH stainless steel, and Ti-6%A1-4%V. 7M0+ stainless steel, a material with two major phases (austenite and ferrite) was also studied to determine the load sharing characteristics of the individual phases. The elastic …

    missouri Repository record for In situ stress measurement by neutron diffraction (opens in a new tab)

  17. Low temperature active-screen plasma surface alloying of precipitation hardening stainless steels

    … This has work investigated the response of 17-4PH and 17-7PH stainless steels to active screen plasma nitriding and active screen plasma carburising. The main focus was on mechanical propet1ies, corrosion, wear resistance and the formation of the S-phase. The active screen plasma nitriding …

    birmingham Download PDF for Low temperature active-screen plasma surface alloying of precipitation hardening stainless steels (opens in a new tab)

  18. High solid loading aqueous base metal/ceramic feedstock for injection molding

    … shrinkage of the molded articles. Two types of 17-4PH stainless steel metal powders, one gas atomized and, the other water atomized, were used for this research.

    njit Repository record for High solid loading aqueous base metal/ceramic feedstock for injection molding (opens in a new tab)

  19. Structuring Difference: The Additive Manufacture of Spatially & Functionally Differentiated Microstructures

    … laser melting from a single composition of 17-4PH stainless steel. The high solidification rates of additive manufacture are exploited to drive very fine austenite grain and cell sizes, suppressing the thermally-driven martensitic transformation and stabilising austenite. But additively …

    whiterose Download PDF for Structuring Difference: The Additive Manufacture of Spatially & Functionally Differentiated Microstructures (opens in a new tab)

Page 1 of 2