Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"3-D Analysis"”.

  1. 3-D analysis of vug connectivity, Indian Basin field, New Mexico

    Includes bibliographical references (pages 153-162).

    colo-mines Repository record for 3-D analysis of vug connectivity, Indian Basin field, New Mexico (opens in a new tab)

  2. 3-D Analysis of a Functional Reach Test in Subjects With Functional Ankle Instability

    CONTEXT: 3-D kinematics and kinetics of the lower extremity during the Star Excursion Balance Test (SEBT) have not been examined in FAI subjects. Additionally, the effects of Kinesio® tape use in subjects with functional ankle instability (FAI) during functional tasks is uninvestigated. OBJECTIVE: …

    vcu Repository record for 3-D Analysis of a Functional Reach Test in Subjects With Functional Ankle Instability (opens in a new tab)

  3. An Eulerian 3D analysis of water droplets impingement on a Convair-580 nose and cockpit geometry

    … performance degradation and ice accretion analysis as well. Code validation results in both 2-D and 3-D are presented and discussed. Results of a 3-D analysis over a Convair-580 nose and cockpit geometry are presented as well. This 3-D analysis is actually a simulation of a flight segment …

    concordia Download PDF for An Eulerian 3D analysis of water droplets impingement on a Convair-580 nose and cockpit geometry (opens in a new tab)

  4. A Comparison of Artificial Neural Network Classifiers for Analysis of CT Images for the Inspection of Hardwood Logs

    … classifiers have been developed for 2-D and 3-D analysis. These classifiers were trained with back-propagation, using training samples of three species of hardwood: cherry, red oak and yellow poplar. These classifiers recognize six classes: heartwood (clear wood), sapwood, knots, bark, split s …

    vt Repository record for A Comparison of Artificial Neural Network Classifiers for Analysis of CT Images for the Inspection of Hardwood Logs (opens in a new tab)

  5. Spindle organization in three dimensions

    … was analyzed by electron tomography. This 3-D analysis reveals morphologically distinct microtubule end morphologies in the mitotic spindle pole. These results have structural implications for models of microtubule interactions with centrosomes Third, spindle assembly was studied in female …

    qucosa-diss

  6. Numerical Modeling of Concrete Flow in Drilled Shaft

    Drilled shafts are cylindrical, cast-in-place concrete deep foundation elements. Their construction involves drilled excavation of soil or rock using large diameter augers, and placement of the necessary reinforcing steel in the excavation followed by concreting. Where a high water table is …

    usf Repository record for Numerical Modeling of Concrete Flow in Drilled Shaft (opens in a new tab)

  7. Facial Tissue Changes with Microimplant Assisted Rapid Palatal Expanders

    … All patients received CBCTs from which a 3-D analysis configuration was created to trace hard and soft tissue landmarks of the midface and nasal cavity regions. 3 judges analyzed each set of records and the average was used to calculate the amount of expansion experienced at each anatomical …

    u-pacific Repository record for Facial Tissue Changes with Microimplant Assisted Rapid Palatal Expanders (opens in a new tab)

  8. Analysis and testing of refrigerant lubricated bearings for centrifugal compressors

    … based on a 2-D Navier-Stokes turbulent model. Analysis showed that bearing load, dynamic properties and compressor vibrations are a strong function of supply pressure, radial clearance and orifice diameter. Vibration analysis carried out on the rotor-bearing system, predicted the onset of …

    city-london Download PDF for Analysis and testing of refrigerant lubricated bearings for centrifugal compressors (opens in a new tab)

  9. 3-D micromorphological comparison of human and carnivore tooth marks

    … and carnivore tooth marks. Overall, this 3-D analysis and statistical comparison demonstrates that human tooth marks are quantitatively distinct from carnivore tooth marks and other bone surface modifications. Applying these findings to the archaeological record will significantly advance …

    colostate Repository record for 3-D micromorphological comparison of human and carnivore tooth marks (opens in a new tab)

  10. Assessing the effects of fluvial abrasion on bone surface modifications using high-resolution 3-D scanning

    … confocal profilometer. Qualitative macroscopic analysis shows that bone surfaces became smoother and polished after tumbling. Most cut marks and tooth marks were still visible. Results indicate that 57.1 percent of the cut marks lost their characteristic internal parallel striations and 18.4 …

    colostate Repository record for Assessing the effects of fluvial abrasion on bone surface modifications using high-resolution 3-D scanning (opens in a new tab)

  11. Validation of a Three Dimensional Motion Capture System for Use in Identifying Characteristics of the Running Walk

    … the RW is not simply a faster version of W. 3-D analysis allowed for thorough analysis of joint angles. The joint angles of the carpus were highly correlated to stride length, OS, and advance placement (P < 0.0001), but were not correlated to velocity (P > 0.05). These joint angles and gait …

    ut-knoxville Repository record for Validation of a Three Dimensional Motion Capture System for Use in Identifying Characteristics of the Running Walk (opens in a new tab)

  12. AEROMECHANICAL BEHAVIOR OF TWIST-MORPHING, HIGH-SPEED, SLOWED RPM ROTORS

    This thesis describes the first comprehensive analysis of a composite coupled edgewise rotor in high-speed forward flight. The design objective was to use composite coupling, namely extension-torsion coupling, to morph the built-in twist of a UH-60A-like rotor in slowed RPM flight. As a part of …

    maryland Repository record for AEROMECHANICAL BEHAVIOR OF TWIST-MORPHING, HIGH-SPEED, SLOWED RPM ROTORS (opens in a new tab)

  13. Rectification of 2-D to 3-D Finite Element Analysis in Buried Concrete Arches Under Discrete Loading

    … element (FE)modeling as the main vehicle of analysis. Such numerical procedures provide an accurate approximation of physical behavior. Practices using FE analysis for buried arch design almost exclusively use two-dimensional models because they are faster to set up and analyze than …

    byu Repository record for Rectification of 2-D to 3-D Finite Element Analysis in Buried Concrete Arches Under Discrete Loading (opens in a new tab) Download PDF for Rectification of 2-D to 3-D Finite Element Analysis in Buried Concrete Arches Under Discrete Loading (opens in a new tab)

  14. A viscous vorticity method for the prediction of turbulent flows around hydrofoils and propellers

    … presenting a significant challenge for numerical analysis and design. Conventional linear and potential flow theories have limitations in predicting turbulent flows. Viscous flow methods, though capable of handling turbulence by incorporating a turbulence model, are often computationally …

    texas Repository record for A viscous vorticity method for the prediction of turbulent flows around hydrofoils and propellers (opens in a new tab)

  15. Three-dimensional finite element analysis of viscoelastic flow

    <p>3-D numerical analysis of a viscoelastic flow is a necessity for better understanding of viscoelastic fluids and viscoelastic flow. It is important both from the scientific and technological points of view. Analysis of viscoelastic flow is a difficult task as it is associated with the problems …

    mcmaster Repository record for Three-dimensional finite element analysis of viscoelastic flow (opens in a new tab)

  16. Bonded Patch Repair Applications for Primary Aircraft Structures

    … strip specimen assessment and finally using 3-D analysis of wide bonded metal joint. This research was a collaborative project between ARC Training Centre for Automated Manufacture of Advanced Composites (AMAC) at the University of New South Wales (UNSW) and Defence Science and Technology (DST) …

    unsw Repository record for Bonded Patch Repair Applications for Primary Aircraft Structures (opens in a new tab)

  17. Heat Shock Response Inhibition and Gene Expression in <em>Xenopus Laevis</em> Cultured Cells

    … poikilotherms. Northern blot and densitometric analysis showed that cells treated with either quercetin or KNK437 decreased the heat shock-induced accumulation of <em>hsp70</em>, <em>hsp47</em>, and <em>hsp30</em> mRNAs. Additionally, constitutive levels of <em>hsp47</em> and <em>hsc70</em> …

    waterloo Repository record for Heat Shock Response Inhibition and Gene Expression in <em>Xenopus Laevis</em> Cultured Cells (opens in a new tab)

  18. Interaction of acoustic beam with elastic structures

    … data. A comparison between a 2-D and 3-D analysis is shown. At all but the lowest incident angles, the differences are reasonably small;In the fourth problem the complex transducer point is applied to wideband transducer operation and employed to study the Lamb wave reflection frequency …

    iastate Repository record for Interaction of acoustic beam with elastic structures (opens in a new tab)

  19. Modelling of Single Component and Bicomponent Extrusion Flows

    … is established with the aid of both a fully 3-D analysis and a 1-D optimization analysis, in agreement with experimental evidence. It is shown that the direction and degree of encapsulation depend directly on the viscosity ratio. For shear thinning fluids exhibiting a viscosity crossover point, …

    mcmaster Repository record for Modelling of Single Component and Bicomponent Extrusion Flows (opens in a new tab)

  20. Open Pit Mining Slopes: Special Stability Considerations

    Slope stability analysis and design are important in mining geotechnical engineering, as open-pits have slopes cut as steep as possible to ensure efficient mining. We must mine the ore while keeping the total waste to a minimum, aiming for a reasonable factor of safety (FS) and tolerable …

    tamu Repository record for Open Pit Mining Slopes: Special Stability Considerations (opens in a new tab)

Page 1 of 2