Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 57 for “"3-D modeling"”.

  1. 3-D Modeling of Piled Raft Foundation

    ABSTRACT 3-D Modeling of Piled Raft Foundation Anup Sinha, Ph.D. Concordia University, 2013 Piled-raft-foundation is a new concept, which has received increasing recognition in recent years. Current design practice is based on conventional group pile or block failure theory, that ignore the bearing …

    concordia Download PDF for 3-D Modeling of Piled Raft Foundation (opens in a new tab)

  2. Investigation of gasSOA formation by parcel and 3-D modeling

    … COSMO-MUSCAT (COnsortium for Small-scale MOdeling und MUlti-Scale Chemistry Aerosol Transport) mit dem kinetischen Partitionierungsansatz erweitert, um eine verbesserte Beschreibung der SOA-Bildung zu erreichen. Die Bildung von hochoxidierten, wenig flüchtigen organischen …

    qucosa-diss

  3. 3-D Modeling of Nearshore Circulation Using ROMS-SWAN: Model Upgrades and Evaluation

    Regional Ocean Modeling System (ROMS v 3.0), a three dimensional numerical model, was recently modified for shallow water applications by including wave induced radiation stresses provided through coupling with a wave propagation model (e.g., SWAN, REF/DIF). The coupled model has been applied to …

    south-carolina Repository record for 3-D Modeling of Nearshore Circulation Using ROMS-SWAN: Model Upgrades and Evaluation (opens in a new tab)

  4. 3-D Modeling of Ductile Tearing Using Finite Elements: Computational Aspects and Techniques

    To provide a computational framework suitable for the solution of these problems, this work also describes the parallel implementation of a nonlinear, implicit finite element code. The implementation employs an explicit message-passing approach using the MPI standard to maintain portability, a …

    uiuc Repository record for 3-D Modeling of Ductile Tearing Using Finite Elements: Computational Aspects and Techniques (opens in a new tab)

  5. Distortion Analysis and 3-D Modeling of Magnetotelluric Data in the Southern Central Andes

    This thesis describes a distortion analysis and modeling of magnetotelluric (MT) and deep geomagnetic sounding (GDS) data of the Southern Central Andes. The data was collected during several field campaigns between 1995 and 1999, within the framework of the German Collaborative Research Programme …

    fu-berlin Repository record for Distortion Analysis and 3-D Modeling of Magnetotelluric Data in the Southern Central Andes (opens in a new tab)

  6. 3-D modeling and graphical simulation of mobile cranes to assist planning of heavy lifts

    Chapter 2 introduces the heavy lift planning system. The overall flow of the proposed planning system is provided and the tools combined to build the system are described. Chapter 3 discusses the different configurations and components of mobile cranes. An object-oriented classification of crane …

    texas Repository record for 3-D modeling and graphical simulation of mobile cranes to assist planning of heavy lifts (opens in a new tab) Restricted access

  7. An application of 3-D modeling and optimization of the final pit limits for a lignite deposit

    … Underground™, an integrated geostatistical modeling package. The largest possible utilization of the original geologic information was intended, and the modeling results were correlated with existing reserves calculations and past geologic observations on quality characteristics. A flexible …

    vt Repository record for An application of 3-D modeling and optimization of the final pit limits for a lignite deposit (opens in a new tab)

  8. An Analysis and Critique of DEM Creaion and 3-D Modeling Using Airborne LIDAR and Photogrammetric Techniques

    … and much more. Within the scope of terrain modeling lie a wide variety of techniques used to build digital elevation models (DEMs). Each approach has inherent problems and difficulties that can alter the accuracy and usability of the DEM produced. The main objectives of this study are to …

    vt Repository record for An Analysis and Critique of DEM Creaion and 3-D Modeling Using Airborne LIDAR and Photogrammetric Techniques (opens in a new tab)

  9. Comparison of thermal behaviors of silicon and perovskite solar cells through coupled optical-electrical-thermal 3-D modeling using COMSOL

    … cell structural and material properties. This modeling strategy is helpful in the heat performance evaluation of the two important types of solar cells and provides meaningful guidance on designing high-efficiency solar cells and even recycling of heat losses from the aspects of material …

    umn Repository record for Comparison of thermal behaviors of silicon and perovskite solar cells through coupled optical-electrical-thermal 3-D modeling using COMSOL (opens in a new tab)

  10. A Surface Displacement Analysis for Volcan Pacaya from October 2001 through March 2013 by Means of 3-D Modeling of Precise Position GPS Data

    … by the NASA Jet Propulsion Laboratory. Forward modeling of observed 3-D displacements for three time periods (before, covering and after the May 2010 eruption) revealed that a plausible source for deformation is related to a vertical dike or planar surface trending NNW-SSE through the cone. For …

    mtu Repository record for A Surface Displacement Analysis for Volcan Pacaya from October 2001 through March 2013 by Means of 3-D Modeling of Precise Position GPS Data (opens in a new tab)

  11. Modeling in a three-dimensional world: whitewater park hydraulics and their impact on aquatic habitat in Colorado

    … fish biomass and to examine the utility of 3-D modeling (vs. two-dimensional (2-D) modeling) in this hydraulically-complex system. Two sections of a small river in Colorado were modeled: one natural section, and one section containing a WWP with three engineered drop structures. A 2-D habitat …

    colostate Repository record for Modeling in a three-dimensional world: whitewater park hydraulics and their impact on aquatic habitat in Colorado (opens in a new tab)

  12. Development of the interface between CAD and waterjet NC systems

    … out in tring to provide more features to 3-d modeling, testing and implementing the software to the cutting machine.</p>

    njit Repository record for Development of the interface between CAD and waterjet NC systems (opens in a new tab)

  13. FUTURE PROOF

    My work can be distilled into two major points of inquiry: perception and technology. I render minimalist interactions between reflective planes, shapes floating in space, and portals into the void. Driven by color, light and space, my work warps its environment through the illusion of illumination …

    csusb Repository record for FUTURE PROOF (opens in a new tab)

  14. A Performance Analysis of Solar Chimney Passive Ventilation System in the Unt Zero Energy Lab

    … ANSYS FLUENT 14.0 has been employed for the 3-D modeling of the solar chimney. The dimensions of the solar chimney are 14’2” X 7’4” X 6’11”. The flow inside solar chimney is found to be laminar and the simulation results show that maximum outlet volumetric flow rate of about 0.12m3/s or 432 cfm …

    unt Repository record for A Performance Analysis of Solar Chimney Passive Ventilation System in the Unt Zero Energy Lab (opens in a new tab)

  15. ESTIMATION OF 3D POINT CLOUDS USING SYNTHETIC APERTURE RADAR DATA OF COMPLICATED TARGETS

    … to generate a 3-D point cloud. While the 3-D modeling application of IFSAR is commonly applied to large-scale terrain mapping, this thesis tests this process by scaling down the image scene to a single, complicated-shaped target. Producing 3-D models of small targets enhances traditional …

    nps Repository record for ESTIMATION OF 3D POINT CLOUDS USING SYNTHETIC APERTURE RADAR DATA OF COMPLICATED TARGETS (opens in a new tab)

  16. Collapse of internally corroded pipe under external pressure

    … effect on collapse pressure requires fully 3-D modeling. By contrast, grooves 10D long or longer behave essentially as "long" grooves and can be analyzed using 2-D models.

    texas Repository record for Collapse of internally corroded pipe under external pressure (opens in a new tab) Restricted access

  17. An algorithm and system for finding the next best view in a 3-D object modeling task

    <p>Sensor placement for 3-D modeling is a growing area of computer vision and robotics. The objective of a sensor placement system is to make task-directed decisions for optimal pose selection.This thesis proposes a Next Best View (NBV) solution to the sensor placement problem. Our algorithm …

    ut-knoxville Repository record for An algorithm and system for finding the next best view in a 3-D object modeling task (opens in a new tab)

Page 1 of 3