Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 95 for “"3-D printed"”.

  1. 3-D Printed microwave and terahertz passive components

    … The filters were the highest frequency metal 3-D printed filters reported at the time of publication. The third project introduces two waveguide filters operating at centre frequency of 180 GHz, which were also fabricated using the micro laser sintering process. These are the world highest …

    birmingham Download PDF for 3-D Printed microwave and terahertz passive components (opens in a new tab)

  2. Low-Cost 3-D Printed Helical Antenna with Dielectric Support

    … design of a low-cost helical antenna using a 3-D printed dielectric core for mechanical support. The research in this thesis concludes that it is possible to design a helical antenna using low-cost dielectric materials with high relative permittivity at microwave frequencies. As a proof of …

    washington Repository record for Low-Cost 3-D Printed Helical Antenna with Dielectric Support (opens in a new tab)

  3. 3-D Printed Microstructures with ZnO Nanoflower for Antimicrobial Applications

    … has been developed. First, a micropatterned 3D printed structure was fabricated. Then it was coated with zinc oxide (ZnO) nanoflower. The study demonstrated that micropatterned structure served as an “armor” to the nanostructure from plastic scraper and finger abrasion. To test the antimicrobial …

    rit Repository record for 3-D Printed Microstructures with ZnO Nanoflower for Antimicrobial Applications (opens in a new tab)

  4. Experimental Measurement of Blood Pressure in 3-D Printed Human Vessels

    … of measuring the flow and pressure from in a 3-D printed artery. Future works will include more life-like material for the artery prints, as well as cadaver vessels.

    iupui Repository record for Experimental Measurement of Blood Pressure in 3-D Printed Human Vessels (opens in a new tab)

  5. Numerical investigation on fatigue and corrosion behaviour of 3-D printed structures

    Structural failure can be a challenging and unpredictable phenomenon to detect, especially under the combination of mechanical loads and environmental conditions. Additive manufacturing has recently gained interest because of its capability of producing complex metal geometries directly from a …

    strathclyde Repository record for Numerical investigation on fatigue and corrosion behaviour of 3-D printed structures (opens in a new tab)

  6. Accuracy of Implants Placed with Surgical Guides: Thermoplastic vs. 3-D Printed

    … implant surgery materials: thermoplastic vs. 3-D printed surgical guides. Materials and Methods:Twenty duplicate mandibular models, ten thermoplastic and ten 3-D printed surgical guides were used. Twenty implants were placed following the guided surgery protocol. Cone beam computed tomography …

    loma-linda Repository record for Accuracy of Implants Placed with Surgical Guides: Thermoplastic vs. 3-D Printed (opens in a new tab)

  7. MECHANICAL TESTING OF FUSED FILAMENT 3-D PRINTED COMPONENTS FOR DISTRIBUTED MANUFACTURING

    … standards relating to material properties and printed components limit this potential. This thesis first investigates the mechanical properties of a wide-range of FFF materials and provides a database of mechanical strength of the materials tested. The results demonstrate that the tensile …

    mtu Repository record for MECHANICAL TESTING OF FUSED FILAMENT 3-D PRINTED COMPONENTS FOR DISTRIBUTED MANUFACTURING (opens in a new tab)

  8. Self-healing effects of copper on 3-D printed 420 stainless steel

    "The purpose of this thesis is to investigate the possibility of attaining the self-healing property in metallic alloys produced by the 3D printing technology. Stainless steel (SS) is used as our metal system and the copper element is added to improve the self-healing property. The sintering …

    msu

  9. Ballistic Experiments with a Sample of 3-D Printed Columbia Plateau Projectile Point Types

    … distinct projectile points were 3-D scanned, printed, and test fired into a clay target. Velocity, kinetic energy, momentum, penetration, and wound channel size were measured. Results indicate all eight arrow mounted point types were suitable for small to medium game. Variations in the …

    central-wash Repository record for Ballistic Experiments with a Sample of 3-D Printed Columbia Plateau Projectile Point Types (opens in a new tab)

  10. Magnetic Characterization of Fe/PLA 3-D Printed Filaments and Fe-Doped Ga2O3 Thin Films

    … materials: soft magnetic Fe/PLA filaments 3-D printed using magnetic field assisted additive manufacturing (MFAAM) and Fe-doped Ga2O3 thin films grown via pulsed laser deposition (PLD) of various iron concentrations. The Fe/PLA filaments were printed on top of permanent magnets to supply …

    texas-state Repository record for Magnetic Characterization of Fe/PLA 3-D Printed Filaments and Fe-Doped Ga2O3 Thin Films (opens in a new tab)

  11. Development of 3-D Printed Hybrid Packaging for GaAs-MEMS Oscillators based on Piezoelectrically-Transduced ZnO-on-SOI Micromechanical Resonators

    … within a few oscillator designs. At last, 3-D printed hybrid packaging using additive manufacturing and laser machining technique has been developed for integrating a MEMS resonator on a silicon-on-insulator (SOI) substrate and a GaAs sustaining amplifier. Fabrication process and fundamental …

    usf Repository record for Development of 3-D Printed Hybrid Packaging for GaAs-MEMS Oscillators based on Piezoelectrically-Transduced ZnO-on-SOI Micromechanical Resonators (opens in a new tab)

  12. Designing and Testing 3-D Printed Wafer-box with Embedded PZT Sensors to Identify the Shape Effect on Energy Harvesting

    … which gives the more reliable output. These 3-D printed wafer-boxes could be can be utilized for APA testing to determine the effectiveness. Additional research could lead to a broader understanding of PZT-based energy harvesting technology as well as providing a platform for testing PZT harvest …

    gsu Repository record for Designing and Testing 3-D Printed Wafer-box with Embedded PZT Sensors to Identify the Shape Effect on Energy Harvesting (opens in a new tab)

  13. The Effect of the Incorporation of Heavy Metal Zeolites into 3-D Printed Surgical Guide Resin on the Surface Stability of SARS-CoV-2

    … of heavy metal zeolites integrated into 3-D printed surgical grade resin (SGR). Data were collected using virus plaque assays and luminescent assays to determine the amount of infectious virus present at designated time points. The collected data were analyzed by GraphPad Prism 9 software. …

    creighton Repository record for The Effect of the Incorporation of Heavy Metal Zeolites into 3-D Printed Surgical Guide Resin on the Surface Stability of SARS-CoV-2 (opens in a new tab)

  14. An Assessment of Volatile Odor Profiles from Polymers used in the Fabrication of Ghost Guns

    3-D printed firearms, also commonly known as ghost guns, have been increasingly popular over the past 13 years. One of the reasons it has increased popularity is due to these weapons’ untraceable nature. The increasing popularity leads to a growing concern about public safety. The current detection …

    ttu Repository record for An Assessment of Volatile Odor Profiles from Polymers used in the Fabrication of Ghost Guns (opens in a new tab) Embargoed until 2028-05-01

  15. Hybrid Rocket Design Study Utilizing Nozzle Cooling and Aft-End Vortex Oxidizer Injection

    … on the design, fabrication and testing of a 3-D printed, water cooled nozzle. This work was done as proof of concept to show that complex, high temperature components could be manufactured using these new techniques, thereby substantially bringing down fabrication costs and allowing …

    ut-knoxville Repository record for Hybrid Rocket Design Study Utilizing Nozzle Cooling and Aft-End Vortex Oxidizer Injection (opens in a new tab)

  16. Design and Analysis of the Impact Diffusion Helmet Through a Finite Element Analysis Approach

    … an impact reduction perspective. Finally, a 3-D printed experimental helmet was impact tested and compared to a 3-D printed control helmet. The experimental helmet brought the channels back into the impact zone in order to judge if they had a physical effect on the acceleration. Both the …

    calpoly Repository record for Design and Analysis of the Impact Diffusion Helmet Through a Finite Element Analysis Approach (opens in a new tab)

  17. PROOF OF CONCEPT FOR 3-D PRINTABLE GEOMETRY OF MICROFLUIDIC BENTHIC MICROBIAL FUEL CELL DEVICE (MBMFC) WITH SELF-ASSEMBLED WIRING

    … cross-sections embedded within PolyJet 3-D-printed chips. The developed protocol demonstrated 75% volumetric clearance of the embedded channels. The protocol was then used to clear channels with T-shaped cross-sections, which were used to produce an experimental proof of principle for …

    nps Repository record for PROOF OF CONCEPT FOR 3-D PRINTABLE GEOMETRY OF MICROFLUIDIC BENTHIC MICROBIAL FUEL CELL DEVICE (MBMFC) WITH SELF-ASSEMBLED WIRING (opens in a new tab)

  18. Additively-Manufactured Hybrid Rocket Consumable Structure for CubeSat Propulsion

    … of small spacecraft systems. Using 3-D printed thermoplastic materials, hybrid rocket fuel grains can be printed with nearly any cross-sectional shape, and embedded cavities are easily achieved. Applying this technology to print fuel materials directly into a CubeSat frame results in an …

    utahstate Repository record for Additively-Manufactured Hybrid Rocket Consumable Structure for CubeSat Propulsion (opens in a new tab)

  19. Development of an Quadcopter Unmanned Aerial Vehicle for Atmospheric Remote Sensing

    … and PM2.5 particulate matter quantities. A 3-D printed drone body is designed and flight tuning is performed. An optimal length for an upward extending mast for the drone body is determined. Low cost, lightweight sensors are compared against higher precision sensors in both static and dynamic …

    cuny Repository record for Development of an Quadcopter Unmanned Aerial Vehicle for Atmospheric Remote Sensing (opens in a new tab)

  20. Investigation of Realistic Material Surface Roughness on a Supersonic Boundary Layer

    … a 6<sup>o</sup> cone with detachable, 3D-printed cone tips, and a 23" hollow cylinder model, with removable 3-D printed sleeves. 3-D printing of both cone tips and sleeves allowed for variability in roughness geometry and size. Specifically, 3-D printed sleeves were designed to mimic …

    ut-knoxville Repository record for Investigation of Realistic Material Surface Roughness on a Supersonic Boundary Layer (opens in a new tab)

Page 1 of 5