Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 89 for “"3-point bending"”.
-
Mechanical Properties of Bone Due to SOST Expression: A 3-Point Bending Assessment of Murine Femurs
… Labs and loaded until failure using three-point bending. Results showed significant differences in treatment group effects for cross sectional area, yield force, and ultimate force. SOST knockout (KO) mice were found to have significantly higher values for these properties in comparison to …
-
Investigation Of Force Decay In Esthetic Composite Orthodontic Archwires
… decay was evaluated by comparing results of 3-point bending tests of nickel-titanium (NiTi) and fiber-reinforced composite archwires. Due to the impracticality of measuring force decay of a single archwire for 30 days, the following protocol was used: each segment was tested in 3-point bending …
-
A methodology of calibrating flexible fibers in the discrete element method for simulating wheat straw shear
… different tests, the cantilever beam test, the 3-point-bending</p> <p>test, and the uniaxial compression test. The calibration was validated with the direct shear test.</p> <p>The cantilever beam test and 3-point-bending test were utilized together to determine the</p> <p>Poisson’s ratio and the …
-
Atomic Layer Deposition Seeded ZnO Nanowires in Hybrid Carbon Fiber Composites: Synthesis, Characterization and Multifunctionality
… tested by single fiber fragmentation test, 3-point bending test, short beam 3-point bending test. It was found that the incorporation of ZnO nanowires significantly improved the mechanical properties of composites including interfacial shear strength, flexural strength and interlaminar shear …
-
Bio-based thermosetting copolymers of eugenol and tung oil
… 0 - 30 wt% TO possessed ultimate flexural (3-point bending) strength of 32.2 - 97.2 MPa and flexural moduli of 0.6 - 3.5 GPa, with 3.2 - 8.8 % strain-to-failure ratio. Those containing 10 - 40 wt% TO exhibited ultimate tensile strength of 3.3 - 45.0 MPa and tensile moduli of 0.02 GPa to 1.12 …
-
Assessment of mechanical properties and microstructure of Co-Cr dental alloys manufactured by casting, milling, and 3D printing
… strength, elongation, and elastic modulus, 3- point-bending test was done for flexural strength, and microhardness test to analyze hardness. The microstructure was evaluated through scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX), as well as X-ray diffraction …
-
Automated material testing
… At the Volvo Cars facility, an automated 3-point bending test cell was developed to enable high-throughput material testing in accordance with the VDA 238-100 standard, ensuring consistent and accurate test execution. This project addresses key challenges encountered during system …
-
Geopolymers Incorporating Wastes and Composites Processing
… of mechanical properties (compression test, 3-point bending test). It was found that fly ash 55 wt.% and borosilicate 45 wt.% composition activated in 13 M NaOH solution holds the best compressive and flexural strength (45 and 4 MPa respectively), 25% stronger than similar counterparts found in …
-
A FIELD INVESTIGATION OF COMPOSITE MUD BRICK COMPRESSIVE STRENGTH
… was measured using an application of the 3-point bending test. It was found that neither straw nor bamboo increased the composite brick’s strength and in fact a decrease of strength was recorded. An increase in brick strain energy density was observed with increasing fiber fraction.
-
Computational modeling of strand-based wood composites in bending
… laminates in tension, compression and 3 point bending is validated. A preliminary investigation is conducted to compare numerical simulations with experimental data for Parallam* in tension and 3 point bending. The favourable comparisons of the model to experimental results attest to the …
-
Processing, structure and properties of Al-matrix composites
… electron microscopy of beams subjected to 3-point bending suggested the ductile additions were providing additional toughening to the composite by a crack-bridging mechanism.</p> <p>The second class of composite investigated highly deformed microstructures of Al with 20vol% additions of …
-
Phenomenological Characterization and Process Development of Infrared-Driven, Automated, Thin-Film Deposition of High-Performance Self-Healing Vitrimers
… (TGA), dynamic mechanical analysis (DMA), and 3-point bending tests. TGA investigations identify an unusual pre-cure behavior at 200-260 degrees C, while optimal cure is found to be 260-340 degrees C. Novel cyclical creep DMA tests find a release of stored energy at 150-160 degrees C which is …
-
Calcium Dynamics Affecting Egg Production, Skeletal Integrity, and Egg Coloration in Ring-necked Pheasants (Phasianus colchicus)
… to compromise skeletal integrity. We applied a 3-point bending test to find femur breaking strength and examined structural bone properties. Calcium and breaking strength were linearly associated. Femurs of hens given lower calcium diets were easier to break. Structural properties of cortical bone …
-
Constitutive equations for metallic glasses: Theory, finite-element simulations and experimental verification
… under multi-axial loading conditions like 3-point bending and complex metal forming experiments.
-
Nonlinear Resonance Ultrasound Spectroscopy for Carbon Carbon Samples
… parameter to micro-damage from cyclic 3-point bending is established. The efficacy of using NRUS to determine damage induced by high-temperature thermal oxidation is determined and the trend compared that of the linear resonant frequency.
-
Carbon composite strengthening: Effects of strain rate sensitivity and feature size
… using a rate-modified version of the standard, 3-point bending test. Rate sensitivity of stress was calculated by varying the strain rate of stress on the samples, and measuring the increase in yield strength. Metal reinforced carbon matrix composite coatings were also examined, with CuC, NiC, and …
-
Effect of manufacturing process conditions on the durability of pultruded vinyl ester/glass composites
… and the mechanical properties evaluated via 3-point bending tests. A reduction in strength was observed for the samples immersed in 50 and 85°C water, with the largest reduction occurring at 85°C. No difference was observed between those samples that had been subjected to mechanical stress and …
-
Arthroskopische Anbohrung equiner Strahlbeine
… numbers on the intraosseous pressure and the 3-point bending breaking strength of isolated navicular bones were studied and correlated to the bone mineral density (BMD). Core decompression significantly reduced the intraosseous pressure response to stresstest- injections. A significant …
-
Effects of Carbon Nanomaterial Reinforcement on Composite Joints Under Cyclic and Impact Loading
… the crack tip. The test coupons were loaded in 3-point bending at 2Hz and 10Hz frequencies for the cyclic loading test. The CNTs and CNFs-reinforced samples displayed higher stiffness and had significantly shorter crack propagation lengths under the same loading cycles. Resistance to crack …
-
A new constitutive equation to predict the nonlinear behavior of short fiber reinforced composite materials
… numerical simulations. In the next step, the 3-point bending experiments are performed on the hybrid component in both direction and different loading rates. The configuration of the test is explained in detail. The components demonstrate different response under different loading rates and …
Page 1 of 5