Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 41 for “"3D FEA"”.

  1. Optimum Design of Axial Flux PM Machines based on Electromagnetic 3D FEA

    … higher torque density and lower losses, feasibility of increasing the number of poles, and facilitating innovative machine structures for emerging applications. One such machine design, which has promising, high efficiency particularly at higher speeds, is of the coreless AFPM type and …

    uky-thes Repository record for Optimum Design of Axial Flux PM Machines based on Electromagnetic 3D FEA (opens in a new tab)

  2. Behavior of straight skewed I-girder bridge with skew index approaching 0.3

    … analysis – 2D grid, plate and eccentric beam or 3D FEA – often are employed for design of I-girder bridges having significant skew. Traditionally, many of these structures have been designed using 1D line girder analysis (LGA). This research presents results from comparative parametric 3D FEA and …

    gatech Repository record for Behavior of straight skewed I-girder bridge with skew index approaching 0.3 (opens in a new tab)

  3. Construction engineering of steel tub-girder bridge systems for skew effects

    … tub-girder bridges using consistent, refined 3D FEA models to model construction forces and deformations. Comparisons of the simplified analysis method to the refined 3D FEA analysis display the limitations of the simplified analysis and present potential sources of error. Furthermore, the …

    gatech Repository record for Construction engineering of steel tub-girder bridge systems for skew effects (opens in a new tab)

  4. Behavior during construction of ramp B over I-40 in Nashville, TN

    … compared to analytical results obtained from a 3D finite element analysis (FEA) model to assess the correlation between measurements and refined analytical predictions. The refined 3D FEA predictions are used as a baseline for evaluation of various simplified analysis methods in a parallel …

    gatech Repository record for Behavior during construction of ramp B over I-40 in Nashville, TN (opens in a new tab)

  5. Thermomechanical stress studies for advanced copper metallization and integration

    … dislocations. In additional to the experiment, a 3D FEA model with half of the periodic unit was developed and justified by comparing with the model containing multiple lines. The FEA results are in reasonable agreement with the experiments. The parametric studies show that a rigid confinement on …

    texas Repository record for Thermomechanical stress studies for advanced copper metallization and integration (opens in a new tab) Restricted access

  6. Stress-Deformation Theories for the Analysis of Steel Beams Reinforced with GFRP Plates

    … based under the new theory. A comparison to 3D FEA results based on established solid elements in Abaqus demonstrates the validity of the theory when predicting the longitudinal-transverse response, but showcases its shortcomings in predicting the torsional response of the composite system. …

    ottawa-retro Repository record for Stress-Deformation Theories for the Analysis of Steel Beams Reinforced with GFRP Plates (opens in a new tab)

  7. Advanced Numerical Modeling of Fiber-Reinforced Elastomeric Isolators (FREIs)

    … structures using FREIs. In this research, 3D finite element analysis (FEA) is carried out to investigate the vertical response of FREIs with various numbers of elastomer layers and reinforcing materials. In addition, the lateral response of FREIs is studied using 3D FEA. Experimental test …

    mcmaster Repository record for Advanced Numerical Modeling of Fiber-Reinforced Elastomeric Isolators (FREIs) (opens in a new tab)

  8. Modeling and Design of Planar Integrated Magnetic Components

    … of frequency. For complicated structures, 2D and 3D finite element analysis (FEA) is adopted and the accuracy of the simulation results is evaluated against exact analytical solutions. Then, a planar litz structure is presented. Some definitions and guidelines are established, which form the basis …

    vt Repository record for Modeling and Design of Planar Integrated Magnetic Components (opens in a new tab)

  9. Analysis and design of single-sided, slotted AMM axial-field permanent magnet machines.

    … analytical approach, finite element analysis (FEA), iron loss investigation and prototype performance comparisons. Analytical analysis of the AFPM machine was performed and the key design variables were evaluated to optimise the design parameters based on the use of AMM. The AMM cutting …

    adelaide Repository record for Analysis and design of single-sided, slotted AMM axial-field permanent magnet machines. (opens in a new tab)

  10. Machine learning enabled thermoelectric generator design and optimization

    … commonly known as 3-D finite element analysis (FEA), is hindered by slow computational speeds. To address these limitations, this thesis proposes a novel approach using artificial neural networks (ANNs) to model TEGs, achieving accuracy and computational efficiency.<br/><br/>This thesis first …

    soton Download PDF for Machine learning enabled thermoelectric generator design and optimization (opens in a new tab)

  11. Performance of Steel Pipelines Backfilled with Controlled Low-Strength Material (CLSM) under Seismic Wave Propagation and Reverse-Slip Fault Rupture

    … CLSM subject to seismic loads. In this research, 3D FEA was conducted using ABAQUS software to determine the performance of buried steel pipes backfilled with CLSM when subjected to seismic wave propagation and reverse-slip fault rupture. Under seismic wave propagation, the study started by …

    umkc Repository record for Performance of Steel Pipelines Backfilled with Controlled Low-Strength Material (CLSM) under Seismic Wave Propagation and Reverse-Slip Fault Rupture (opens in a new tab)

  12. Experimental and Simulation Predicted Crack Paths For AL-2024-T351 Under Mixed-Mode I/II Fatigue Loading Using An Arcan Fixture

    … using three-dimensional finite element analysis (3D-FEA) with 10-noded tetrahedral elements via CRACK3D. While modeling the entire fixture-specimen geometry, a modified version of VCCT with automatic crack tip re-meshing and a maximum normal stress criterion were used to predict the direction of …

    south-carolina Repository record for Experimental and Simulation Predicted Crack Paths For AL-2024-T351 Under Mixed-Mode I/II Fatigue Loading Using An Arcan Fixture (opens in a new tab)

  13. COST-BENEFIT ANALYSIS OF 3D FINITE ELEMENT MODELING OF THE TIBIA USING A HEALTHY RUNNING POPULATION

    … methods, like finite element analysis (FEA), are used to further understand BSI mechanisms. FEA can be performed on three-dimensional (3D) models, however, this method has several drawbacks such as being time consuming and computationally expensive. Alternatively, FEA can be performed on …

    ecu Repository record for COST-BENEFIT ANALYSIS OF 3D FINITE ELEMENT MODELING OF THE TIBIA USING A HEALTHY RUNNING POPULATION (opens in a new tab)

  14. ANALYZING THE EFFECT OF REBAR HEATING ON BRIDGE STRUCTURES: SURFACE TEMPERATURE IMPLICATIONS

    … Key findings indicate that the developed 3D FEA model effectively avoid ice formation on bridge surfaces by using an external electrical energy source connected to transverse steel rebars. Parameters such as outside temperature, wind speed, and EPH location significantly influence the …

    ecu Repository record for ANALYZING THE EFFECT OF REBAR HEATING ON BRIDGE STRUCTURES: SURFACE TEMPERATURE IMPLICATIONS (opens in a new tab)

  15. Integration of Physically-based and Data-driven Approaches for Thermal Field Prediction in Additive Manufacturing

    … framework consists of (i) thermal modeling using 3D finite element analysis (FEA), (ii) surrogate modeling using functional Gaussian process, and (iii) Bayesian calibration using the thermal imaging data. Based on heat transfer laws, I first investigate the transient thermal behavior during AM …

    vt Repository record for Integration of Physically-based and Data-driven Approaches for Thermal Field Prediction in Additive Manufacturing (opens in a new tab)

  16. VERTICAL DYNAMIC RESPONSE OF MICROPILE GROUPS USING A NON-LINEAR SOIL BEHAVIOR

    … three-dimensional finite element analysis (3D FEA) , modified Drucker-Prager, soil-micropile interaction.

    maryland Repository record for VERTICAL DYNAMIC RESPONSE OF MICROPILE GROUPS USING A NON-LINEAR SOIL BEHAVIOR (opens in a new tab)

  17. Four-Output Isolated Power Supply for the Application of IGBT Gate Drive

    … converter is designed and analyzed in 3D FEA software. An N-port transformer model is proposed to implement the inductance matrix into the leakage inductance matrix for circuit analysis. Based on this N-port model several measurements to extract the parameters in this model are …

    vt Repository record for Four-Output Isolated Power Supply for the Application of IGBT Gate Drive (opens in a new tab)

  18. Investigation of System Requirements and Design of an Axial Flux Permanent Magnet Machine for an Electric Taxiing System for a Commercial Midsize Aircraft

    … and three-dimensional finite element analysis (3D FEA) to fulfill the specified motor characteristics required for the electric propulsion unit. Finally, suggestions for potential improvements and future work are discussed.

    mcmaster Repository record for Investigation of System Requirements and Design of an Axial Flux Permanent Magnet Machine for an Electric Taxiing System for a Commercial Midsize Aircraft (opens in a new tab)

  19. Effective Cross-Frame Framing Arrangements and Simplified Design for Straight Skewed and Nonskewed Steel I-Girder Bridges

    … Edition of the AASHTO LRFD Specifications. A 3D FEA parametric study was completed considering a range of geometric variables and cross-frame framing arrangements. Six framing arrangements, consisting of contiguous, staggered, and variations of lean-on framing, were studied for moderately …

    gatech Repository record for Effective Cross-Frame Framing Arrangements and Simplified Design for Straight Skewed and Nonskewed Steel I-Girder Bridges (opens in a new tab)

  20. Influence of live -load deflections on superstructure performance of slab on steel stringer bridges

    … existing typical highway bridges. In this work, 3D FEA tools have been developed to investigate the natural frequency of continuous span bridges and have been employed in a comprehensive parametric study. From these results, practical and simplified equations are proposed to predict the natural …

    wvu Repository record for Influence of live -load deflections on superstructure performance of slab on steel stringer bridges (opens in a new tab)

Page 1 of 3