Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 61 for “"3D FEM"”.
-
Electric Machine 3D FEM Modeling and Design Impact on Torque Ripple
… between Ansys Maxwell 2D and ElmerFEM 2D demonstrates that back-EMF and flux linkage were in good agreement, confirming the reliability of the Elmer setup for the Prius motor. Finally, the ElmerFEM 3D results showed good agreement with the 2D results in terms of back-EMF harmonic …
-
A 3D FEM COMPARATIVE STUDY ON THE IMPACT RESPONSE BETWEEN HUMAN HEAD AND NOCSAE HEAD DUE TO FREE FALL
We all enjoy sports be it watching or playing. Concussion is well known topic when it comes sports related injuries. However, concussion and brain injury is not exclusive to sports and outdoor activities. Sometimes, even the impact due to slip and fall at small heights can cause serious damage to …
-
Coupled electromagnetic thermal and kinetic modeling for microwave processing of polymers with temperature- and cure-dependent permittivity using 3D FEM
Thesis (Ph. D.)--Michigan State University. Department of Electrical and Computer Engineering, 2005
-
Backcalculation of pavement layers moduli using three-dimensional nonlinear explicit finite element analysis.
… on Three Dimensional Finite Element Modeling (3D FEM) was developed. This approach accounts for the transient dynamic nature of FWD load, the three dimensional geometry of the pavement structure, and the friction and bonding characteristics of pavement layers interfaces. The 3D FEM …
-
Comparative study of evaluation methods for existing portal frame bridges: Evaluating the difference in using a 3D FEM-design approach and a one-way slab analysis when assessing existing bridge structures
… or the bridge is modelled in a more modern 3D analysis. Both modelling choices have their advantages and disadvantages, and depending on what bridge is to be assessed the choice of modelling could influence the results of the capacity assessment as well as the overall workload associated …
-
A NOCSAE DROP TEST/ 3D-FEM STUDY ON THE RELATIONSHIP BETWEEN KINEMATIC RESPONSE OF THE HEAD, HEAD IMPACT CONTACT PRESSURE (HICP) AND KINETIC RESPONSE OF THE BRAIN TO DELINEATE THE RISK OF TRAUMATIC BRAIN INJURIES (TBI).
How many times have you seen a person slip and fall down and had a good laugh about it? How many times we slip and fall down on the floor and got up and walked away thinking everything is normal? Probably we might wonder “Are drops which occur at a small height dangerous?” Yes, they can be. Brain …
-
Finite element modeling of dowel -jointed plain concrete pavement response to thermal and moving traffic loads
… develop Three Dimensional Finite Element Models (3D-FEM) that can be used to investigate the separate or combined effect of moving axle loads and thermal gradient on the response of dowel Jointed Portland Cement Concrete Pavement (JPCCP) structures. The availability of a mechanistic tool that can …
-
Numerical study on the seismic behavior of inclined piles in liquefiable soils
… Firstly, a comprehensive three-dimensional (3D) Finite Element Method (FEM) model of the soil-pile interaction system is established in OpenSees. Special attentions have been given to the liquefaction behavior of soil, pile geometry simulation, and the slippage and separation mechanisms at …
-
Laboratory model tests to assess the effects of scale and stress on the stiffness of laterally loaded foundations in sand
… compared to the predictions of a newly developed 3D Finite Element Method (FEM) analysis as well predictions from the American Petroleum Institute (API), which utilizes the p-y method. A repeatable and consistent methodology to conduct a large number of 1-g lateral load tests in sand using spheres …
-
Simulation Of Bridge Responses To Heavy Vehicles
… 3 dimensional finite element model (3D FEM) of the heavy vehicle with spring and damper systems has been developed and is used when studying the heavy vehicle bridge interaction, in order to predict accurate bridge responses for heavy vehicles. The 3D FEM of heavy vehicles thus …
-
Enhancement of transmission line theory for finite-length non-uniform transmission lines using scattering theory
… compared with full-wave thin wire and full-wave, 3D-FEM solvers, respectively.
-
Permanent Magnet Fault Current Limiters for Electrical Power Protection Systems
… current. A commercial Finite Element software (FEM) was used in the device modelling techniques from the commencement till the end of the final design. The work commenced with the verifications and investigations of a recently reported model in 2D (FEM). Then, a prototype of small scale, in two …
-
Optimization and Control of Lumped Transmitting Coil-Based In-Motion Wireless Power Transfer Systems
… experience and use computationally costly 3D FEM algorithms. The proposed optimization algorithms are comprehensive, eliminates designer experience and employs analytical modeling. The control of power transfer is very much related to proper synchronization of the power transfer with …
-
Modelling inductively coupled coils for wireless implantable bio-sensors: a novel approach using the finite element method
… coupled link by using the finite element method (FEM) to simulate a three-dimensional representation of the coils and surrounding magnetic field. The validity of the simulation is tested by comparison to analytically-developed formulas for self-inductance, ac resistance and mutual inductance of …
-
Evaluating the rate of leakage through defects in a geomembrane
… thicknesses, and applied slopes; ii) develop 3D numerical model representative of the experimental geomembrane flow system to evaluate the underlying phenomena; iii) assess the effects of a geomembrane thickness and slope on the flow rate through the selected geomembrane defect; and iv) to …
-
ΑΝΤΙΜΕΤΩΠΙΣΗ ΤΩΝ ΚΑΤΟΛΙΣΘΗΣΕΩΝ ΜΕ ΠΑΣΣΑΛΟΥΣ
… WITH THE OUTPUTOF A PARAMETRIC STUDY USING A 3D-FEM PROGRAM. FINALLY, BY USING A MODIFICATIONOF ITO'S AND MATSUI'S (1975) THEORY, A SIMPLE MECHANISM WAS PROPOSED, WHICH ISABLE TO ANALYZE THE PHENOMENON AND TO GIVE A SIMPLIFIED METHOD OF DESIGN. THE MAIN CONCLUSION WAS THAT THE STABILIZING …
-
Evaluation of seismic Vulnerability and Strengthening of heritage Buildings. Case Study: The Giralda of Seville
… model has been carried out. Both 2D and 3D Finite Elements Model (FEM) has been developed to analyse the settlements, considering the different construction phases, the loads, the time of execution and consolidation between phases. Therefore, the author has found that the tilt to the …
-
Measurements and finite element modelling of transformer flux with dc and power frequency current
… to excessive stray flux. Finite element matrix (FEM) modelling software is of considerable use in transformer engineering as it is able to solve electromagnetic fields in transformers. For many problems, typically involving only specific parts of a transformer, fairly accurate solutions can be …
-
Modeling and analyzing parasitic parameters in high frequency converters
… novel analytical method, finite element method (FEM), and experimental measurements for different structures and windings arrangements. Also, the magnetic field, electric field, electric displacement, and electric potential distribution are simulated and analyzed. Moreover, a high voltage system …
Page 1 of 4