Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 89 for “"3D Finite Element Model"”.

  1. Development of 3D Finite Element Model of Human head

    … the help of computational mechanics such as the Finite-Element Method (FEM), the performance of BAHA can be improved before the actual costly physical models are built. This thesis aims to develop FE head models that are readily available for commercial use. This thesis presents two different …

    chalmers Repository record for Development of 3D Finite Element Model of Human head (opens in a new tab)

  2. Development of 3D Finite Element Model of Human head

    … the help of computational mechanics such as the Finite-Element Method (FEM), the performance of BAHA can be improved before the actual costly physical models are built. This thesis aims to develop FE head models that are readily available for commercial use. This thesis presents two different …

    chalmers Repository record for Development of 3D Finite Element Model of Human head (opens in a new tab)

  3. Development of 3D Finite Element Model of Human head

    … the help of computational mechanics such as the Finite-Element Method (FEM), the performance of BAHA can be improved before the actual costly physical models are built. This thesis aims to develop FE head models that are readily available for commercial use. This thesis presents two different …

    chalmers Repository record for Development of 3D Finite Element Model of Human head (opens in a new tab)

  4. Study of the Behaviour of Non-Crimp Fabric Laminates by 3D Finite Element Model

    … in-plane behaviour and causing specific failure models. A new method to efficiently model the fibre crimp of the tows in mesoscopic scale 3D finite element models of non-crimp fabric laminates is presented in this study. This method consists of modelling the fibre crimp using straight meshes and …

    sevilla Repository record for Study of the Behaviour of Non-Crimp Fabric Laminates by 3D Finite Element Model (opens in a new tab)

  5. 3D finite element model for predicting cutting forces in machining unidirectional carbon fiber reinforced polymer (CFRP) composites

    … experimental and numerical. Analytical models are only good for a limited range [0° – 75°] of Fiber Orientations , to be found from now on as “FO” in this thesis. Experimental studies are expensive and time consuming. Also, a wide variety of controlling parameters exist in an …

    uvic Repository record for 3D finite element model for predicting cutting forces in machining unidirectional carbon fiber reinforced polymer (CFRP) composites (opens in a new tab)

  6. Development of a 3D finite element model for quasi-static indentation of a Type 3 pressure vessel

    … this project, a methodology to develop a novel 3D finite element model of a Type III cylinder under quasi-static indentation loading is presented. The aim is to investigate the structure’s damage tolerance properties by predicting the residual indentation developed in the inner metal liner of …

    soton Download PDF for Development of a 3D finite element model for quasi-static indentation of a Type 3 pressure vessel (opens in a new tab)

  7. An Investigation of Humeral Stress Fractures in Racing Thoroughbreds Using a 3D Finite Element Model in Conjunction with a Bone Remodeling Algorithm

    … exhibit humeral fracture has made equines useful models in the epidemiology of stress fractures. In this study, a racing Thoroughbred humerus was simulated during training using a 3D finite element model in conjunction with a bone remodeling algorithm. Nine muscle forces and two contact forces …

    calpoly Repository record for An Investigation of Humeral Stress Fractures in Racing Thoroughbreds Using a 3D Finite Element Model in Conjunction with a Bone Remodeling Algorithm (opens in a new tab)

  8. Effect of cutting tool microgeometry when milling hardened steels, a finite element simulation and surface integrity analysis

    This research work presents a 3D finite element model for the milling of hardened steels. The model was developed using ABAQUS/Explicit software and the Lagrangian approach was utilized. Experimental milling tests were performed to validate the numerically generated cutting forces and chip …

    uoit Repository record for Effect of cutting tool microgeometry when milling hardened steels, a finite element simulation and surface integrity analysis (opens in a new tab)

  9. Evaluation of the Elastic Properties of Thin Films by Finite Element Method

    This work addresses the implementation of a 3D finite element model (FEM) allowing the evaluation of the elastic properties of metallic thin films deposited on a substrate by magnetron sputtering. In particular, the Young's modulus and the stress-strain relation in compression of Cu, Zr, amorphous …

    liege Repository record for Evaluation of the Elastic Properties of Thin Films by Finite Element Method (opens in a new tab) Download PDF for Evaluation of the Elastic Properties of Thin Films by Finite Element Method (opens in a new tab)

  10. Finite element analysis of cell subjected to compressive loading

    A 3D finite element model was built to study the mechanical response of the cell to load. The model included major structural components of a cell like cytoskeletal elements, cell membrane and the presence of internal fluid pressure. The cell was considered as a pressurized, fluid filled bag where …

    wvu Repository record for Finite element analysis of cell subjected to compressive loading (opens in a new tab)

  11. Standardization of the Electrical Impedance Myography (EIM) and Detection of Breast Cancer Using EIM

    … for the assessment of EIM data. In this study, A 3D finite element model of human upper arm with rectangular shapes of electrode was developed for seven different ambient temperatures in the range of 20℃ to 50℃ to analyse temperature distribution inside biological tissue of human upper arm and …

    gsu Repository record for Standardization of the Electrical Impedance Myography (EIM) and Detection of Breast Cancer Using EIM (opens in a new tab)

  12. Multi-Scale Fatigue Damage Life Assessment of a Railway Wheel Using a Critical-Plane Model

    A 3D finite element model is constructed in ABAQUS® to simulate the stress/strain fields that take place under the rolling-contact of railway wheels on rails. This FE model constitutes a faithful replica of a railway wheel that is rolled on a rail segment using a hard-contact over-closure …

    tamu Repository record for Multi-Scale Fatigue Damage Life Assessment of a Railway Wheel Using a Critical-Plane Model (opens in a new tab)

  13. Finite element analysis of machining damage in manufacturing ceramic implants

    … of temperature-dependent mechanical behavior models of Al2O3. Ceramic grinding is often used to machine orthopedic implants, yet a deep understanding of the alumina mechanical behavior, in particular machining damage, is not well established. To have an insight into the process mechanism, a 3D …

    alabama Repository record for Finite element analysis of machining damage in manufacturing ceramic implants (opens in a new tab)

  14. Multi-chamber tyre design and analysis for low rolling resistance

    … satisfactorily. In this research, a full 3D finite element model of the tyre was developed using Abaqus 6.13-1 and validated against several experimental prototypes of single, dual and five multi-chambers respectively for targeted rolling performances. Using the validated finite element …

    birmingham Download PDF for Multi-chamber tyre design and analysis for low rolling resistance (opens in a new tab)

  15. Bio-mechanics of the hip joint and the engineering considerations in the treatment of unstable intertrochanteric fractures

    … proximal and digital fragments. A mathematical model is created in this study to examine the 135° and 150° nail plate. The results give an approximate estimation of stresses on the two plates. A 3D finite element model of the two plates is created and the plate is loaded with different forces. …

    njit Repository record for Bio-mechanics of the hip joint and the engineering considerations in the treatment of unstable intertrochanteric fractures (opens in a new tab)

  16. A Finite Element and Experimental Investigation on the Fatigue of Riveted Lap Joints in Aircraft Applications

    … in the riveted lap joint. In this work, a 3D finite element model of the riveting process that incorporates plasticity and contact between the various surfaces is simulated using ABAQUS finite element code to capture the residual stress state at the rivet/skin interface. The finite element …

    gatech Repository record for A Finite Element and Experimental Investigation on the Fatigue of Riveted Lap Joints in Aircraft Applications (opens in a new tab)

  17. Surface ship shock modeling and simulation: extended investigation

    … has lead to a significant effort to develop modeling and simulation capabilities that can provide decision-making data comparable to that gained from the actual tests. Unfortunately, efforts to capture the response of a ship's structure to an UNDEX event require extremely large and complex …

    nps Repository record for Surface ship shock modeling and simulation: extended investigation (opens in a new tab)

  18. Dynamic Amplification Effect on Bridges under Traffic Loads: Parametric Study and Novel Design Integration Approach

    … undertook a comparative analysis of analytical models and revealed that DAF can be reliably estimated using bridge parameters. Results highlighted notable DAF variations even among bridges with similar spans and frequencies, exposing limitations in current design codes. While dynamic …

    concordia Download PDF for Dynamic Amplification Effect on Bridges under Traffic Loads: Parametric Study and Novel Design Integration Approach (opens in a new tab)

  19. Three transdimensional factors for the conversion of 2D acoustic rough surface scattering model results for comparison with 3D scattering

    … acoustic remote sensing applications. To model this problem, a fully three-dimensional (3D) finite element model has been developed, but it requires an abundance of time and computational resources. Two-dimensional (2D) models that are much easier to compute are often employed though they …

    texas Repository record for Three transdimensional factors for the conversion of 2D acoustic rough surface scattering model results for comparison with 3D scattering (opens in a new tab)

Page 1 of 5