Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 85 for “"3D scan"”.

  1. Multiple 3D scan data registration

    A 3D geometric model representing the surface of a 3D object is most often used for synthesizing highly realistic 3D images. The advent of 3D scanners has made the acquisition of 3D surface geometry of existing objects relatively simple. In most 3D scanners, it is difficult, to acquire the complete …

    concordia Download PDF for Multiple 3D scan data registration (opens in a new tab)

  2. Towards automating 3D scan acquisition of factory equipment

    This thesis presents an autonomous 3D scanning system designed for digitizing factory equipment to create high-fidelity digital twins of industrial environments. The motivation behind this work stems from the need to enhance various industrial processes, including factory floor optimization, …

    iastate Repository record for Towards automating 3D scan acquisition of factory equipment (opens in a new tab)

  3. Defect-aware 3D Geometry Reconstruction from 2D Annotations and 3D Scan Data

    … linking that 2D defect information to the 3D geometry of the part by reconstructing the location and severity of the defect-induced deformation of the 3D surface is challenging with limited 3D scan data and the absence of certified 3D reference geometry. This gap between 2D defect …

    chalmers Repository record for Defect-aware 3D Geometry Reconstruction from 2D Annotations and 3D Scan Data (opens in a new tab)

  4. VALIDITY OF LANDMARK SELECTION GIVEN DIFFERENT 3D SCAN PROCESSING PARAMETERS: LANDMARK LOCATION ON 3D MODELS OF YACCHI CRANIA

    … The collection has been captured in surface scans and by 3-D coordinate digitizer at different times by different researchers. Adapting 3-D scanning and 3-D medical imaging technology into anthropology is highly advantageous in terms of the quality and quantity of data that can be collected …

    montana-tech Repository record for VALIDITY OF LANDMARK SELECTION GIVEN DIFFERENT 3D SCAN PROCESSING PARAMETERS: LANDMARK LOCATION ON 3D MODELS OF YACCHI CRANIA (opens in a new tab)

  5. VALIDITY OF LANDMARK SELECTION GIVEN DIFFERENT 3D SCAN PROCESSING PARAMETERS: LANDMARK LOCATION ON 3D MODELS OF YACCHI CRANIA

    … The collection has been captured in surface scans and by 3-D coordinate digitizer at different times by different researchers. Adapting 3-D scanning and 3-D medical imaging technology into anthropology is highly advantageous in terms of the quality and quantity of data that can be collected …

    montana Repository record for VALIDITY OF LANDMARK SELECTION GIVEN DIFFERENT 3D SCAN PROCESSING PARAMETERS: LANDMARK LOCATION ON 3D MODELS OF YACCHI CRANIA (opens in a new tab)

  6. Intraoperative 3D imaging in intraarticular tibial plateau fractures - Does it help to improve the patients' outcomes?

    … Hilfestellung eines additiven intraoperativen 3D Scans im Vergleich zur konventionellen Operation mit einem zweidimensionalen Bildverstärker (Fluoroskopie) untersucht. Hintergrund dieser Arbeit ist, dass komplexe Tibiakopffrakturen eine schwerwiegende Knieverletzung darstellen, welche oft in …

    qucosa-diss

  7. Comparison of occlusal contacts on mounted dental models to contacts identified on digital 3D models using a new virtual alignment method

    As 3D imaging of dental models becomes more common in clinical dentistry, the need for accurate images will increase. In order for these 3D models to be of greatest benefit, they will need to be aligned to accurately represent the given presentation of the individuals they represent. This is an …

    ubc Repository record for Comparison of occlusal contacts on mounted dental models to contacts identified on digital 3D models using a new virtual alignment method (opens in a new tab) Download PDF for Comparison of occlusal contacts on mounted dental models to contacts identified on digital 3D models using a new virtual alignment method (opens in a new tab)

  8. Avatar Creation and Customization for Health Games

    Creating 3D avatars that realistically depict a user is very difficult and time consuming. Most 3D avatars are created manually by artists, and personalization options are few. Because 3D scan is an emerging technology, most 3D scanners are very expensive. This thesis presents a three-tiered system …

    houston Repository record for Avatar Creation and Customization for Health Games (opens in a new tab)

  9. Semi-Automated Shape Model Fitting for HRTF Simulation using Mesh2HRTF

    … it does not require special facilities, only a 3D mesh. For simulation to work, the simulator needs a high quality mesh of the subject's head and ears as input, but 3D capture techniques produce meshes that have artifacts. This thesis proposes three semi-automated non-rigid registration …

    mcmaster Repository record for Semi-Automated Shape Model Fitting for HRTF Simulation using Mesh2HRTF (opens in a new tab)

  10. Wertigkeit klinischer, instrumenteller und bildgebender Untersuchungsverfahren der Kiefergelenksdiagnostik bei Patienten mit juveniler idiopathischer Arthritis

    … die Joint Vibration Analysis (JVA) sowie die 3D-Stereophotogrammetrie (3d-Scan) eingesetzt. Ziel war mittels non-invasiver, kostengünstiger und schnell verfügbarer Untersuchungsmethoden eindeutige Parameter zum Befall der Kiefergelenke zu detektieren. Patienten und Methodik: In dieser Arbeit …

    wurz-thes Repository record for Wertigkeit klinischer, instrumenteller und bildgebender Untersuchungsverfahren der Kiefergelenksdiagnostik bei Patienten mit juveniler idiopathischer Arthritis (opens in a new tab)

  11. Indoor Navigation Technology Exploration and Application in University Buildings

    … indoor navigation technologies, uses of as-built 3D scan use in indoor navigation, and to develop a prototype application by using as-built 3D scans to assist users who are new to the building and want to locate facilities. For example, finding the restroom or nearest exit-way in case of …

    texas-state Repository record for Indoor Navigation Technology Exploration and Application in University Buildings (opens in a new tab)

  12. Abrasion on Concrete Surfaces Caused by Hydraulic Loading with Water-Borne Sands

    … and abraded material volume, were measured using 3D scan technology. These measurements were analyzed using ArcGIS tools, and MATLAB functions. Evaluations of how well the concrete specimens resisted abrasive erosion were determined through comparisons. The results show that in terms of abrasion …

    concordia Download PDF for Abrasion on Concrete Surfaces Caused by Hydraulic Loading with Water-Borne Sands (opens in a new tab)

  13. Muscle-based facial animation using blendshapes in superposition

    … model of a known human subject is compared to 3D scan reference data and video reference data of that person. Test animation is compared to video reference footage. The test animation seems to mimic the effects of actual muscle action superposition accurately.

    tamu Repository record for Muscle-based facial animation using blendshapes in superposition (opens in a new tab)

  14. VYUŽITÍ 3D TECHNOLOGIÍ VE VEŘEJNÉM PROSTORU

    … pojem zahrnující celou řadu technologíí - 3D scan, převádějící již reálné prostorové objekty do paměti počítače, parametrické modelování, které vytváří prostorové objekty na základě formotvorných algoritmů, fotogrammetrie metoda sestavující trojrozměrný objekt z fotografií, technologie 3D …

    brno-tech Repository record for VYUŽITÍ 3D TECHNOLOGIÍ VE VEŘEJNÉM PROSTORU (opens in a new tab)

  15. Experimenteller Verfahrensvergleich zur Bestimmung der Implantatlockerung der transiliosakralen Verschraubung

    … Äquivalenz zur Goldstandarduntersuchung, dem 3D-Scan mittels Bildverstärker. Diesen definierten wir als Bezugsmethode, da beispielsweise in der Wirbelsäulenchirurgie eine computertomographische Schnittbildgebung zur Detektion implantatbedingter Komplikationen empfohlen wird und in vorherigen …

    qucosa-diss

  16. Planning Plastic Surgery in 3D. An innovative approach and tool

    … procedure. In this work, we present a new 3D system able to automatically suggest, for selected facial features as nose, chin, etc., shapes that aesthetically match the patient’s face. The basic idea is suggesting shape changes aimed to approach similar but more harmonious faces. To this …

    poli-torino Repository record for Planning Plastic Surgery in 3D. An innovative approach and tool (opens in a new tab)

  17. 3D PRINTING OF THE PROXIMAL RIGHT FEMUR: IT’S IMPLICATIONS IN THE FIELD OF FORENSIC ANTHROPOLOGY AND BIOARCHAEOLOGY

    3D scanning and Printing have become useful in many scientific fields over the last few years, and Physical Anthropology/ Archaeology is not an exception. With skeletal collections decreasing all over the globe and the question of preservation on the rise, it has become necessary to look towards …

    montana Repository record for 3D PRINTING OF THE PROXIMAL RIGHT FEMUR: IT’S IMPLICATIONS IN THE FIELD OF FORENSIC ANTHROPOLOGY AND BIOARCHAEOLOGY (opens in a new tab)

  18. 3D PRINTING OF THE PROXIMAL RIGHT FEMUR: IT’S IMPLICATIONS IN THE FIELD OF FORENSIC ANTHROPOLOGY AND BIOARCHAEOLOGY

    3D scanning and Printing have become useful in many scientific fields over the last few years, and Physical Anthropology/ Archaeology is not an exception. With skeletal collections decreasing all over the globe and the question of preservation on the rise, it has become necessary to look towards …

    montana-tech Repository record for 3D PRINTING OF THE PROXIMAL RIGHT FEMUR: IT’S IMPLICATIONS IN THE FIELD OF FORENSIC ANTHROPOLOGY AND BIOARCHAEOLOGY (opens in a new tab)

  19. A Low-Cost Custom Knee Brace Via Smartphone Photogrammetry

    … work for a low-cost three-dimensional (3D) printed custom knee brace. Specifically, the objective was to research, develop and implement a novel workflow aimed to be easy to use and available to anyone who has access to a smartphone camera and 3D printing services. The developed workflow …

    ottawa-retro Repository record for A Low-Cost Custom Knee Brace Via Smartphone Photogrammetry (opens in a new tab)

  20. Parametric Design Framework for Custom-fit Wearable Products

    … and a guideline for designers. Combined with 3D scan technology and anthropometric studies, the PDF is applied to three case studies in the dissertation. Two case studies on bras and eyewear frames demonstrate the workflow of the PDF and validate the framework’s capability and capability with …

    gatech Repository record for Parametric Design Framework for Custom-fit Wearable Products (opens in a new tab)

Page 1 of 5