Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 127 for “"3D scanner"”.

  1. Rotační 3D scanner

    Projekt sa zaoberá návrhom konštrukciou rotačného 3D skeneru a to ako po hardvérovej tak i po softvérovej stránke. Pri hardvérovej časti je dôležitým faktorom čo najnižšia cena a tomu zodpovedá aj jeho jednoduchosť. Softvérová stránka je vyriešená pomocou nástroju FFmpeg a programovacieho …

    brno-tech Repository record for Rotační 3D scanner (opens in a new tab)

  2. Automated Dimension Calculations using a Constructed LiDAR 3D Scanner

    With an increased interest in autonomous agents,the need for digital models of the surrounding environment is increasing. This thesis explores the usages of a LiDAR sensor in a rotating platform,and in particular the ability to perform automated dimension calculation of closed rooms environments. …

    chalmers Repository record for Automated Dimension Calculations using a Constructed LiDAR 3D Scanner (opens in a new tab)

  3. Design och konstruktion av en 3D-scanner för små objekt

    … 0,5-20mm i syfte att användas för 3D-modellering och träning av AI-modeller. Systemet består av en kvartcirkelformad båge med fyra kameramoduler, ett stegmotordrivet rotationsbord, LED-belysning med manuellt justerbar ljusstyrka och färgtemperatur, samt en Raspberry Pi 4B som …

    chalmers Repository record for Design och konstruktion av en 3D-scanner för små objekt (opens in a new tab)

  4. Behandlungsgenauigkeit mittels individualisierter Brackets in der Lingualtechnik

    … Set-Up- und Abschlussmodelle wurden mittels 3D-Scanner digitalisiert, virtuell überlagert und von jedem einzelnen Zahn die Abweichungen der Rotationen und Translationen in den drei Raumdimensionen berechnet. Die Frontzähne zeigten Abweichungen der Rotationen von weniger als 4,5° und der …

    wurz-thes Repository record for Behandlungsgenauigkeit mittels individualisierter Brackets in der Lingualtechnik (opens in a new tab)

  5. A multi-sensor approach for reverse engineering of an object

    … freeform objects based on the integration of a 3D scanner and a coordinate measuring machine (CMM). The aim is to obtain a more efficient and accurate digitization result of high accuracy and at the same time exploiting the advantages of both the laser and mechanical sensors with minimum human …

    nus Repository record for A multi-sensor approach for reverse engineering of an object (opens in a new tab) Download file for A multi-sensor approach for reverse engineering of an object (opens in a new tab)

  6. Development of a Fit-Matching App: Validation of 3-D Scanning Applications

    … the wearers’ better-fitting safety eyewear using 3D technology. We have successfully tested the feasibility of the use of commercially available 3D scanning apps using a mannequin head to integrate into the app we develop. However, such scanning apps need to be tested with actual human faces whose …

    uab Repository record for Development of a Fit-Matching App: Validation of 3-D Scanning Applications (opens in a new tab)

  7. Cone Penetration Test in Unsaturated Soil with Matric Suction Measurement

    … the research findings regarding the use of 3D scanner for shrinkage limit testing of soils are presented; the second half of this dissertation presents the findings related to the chamber tests conducted which measures the matric suction of the unsaturated soil during cone penetration tests. …

    sask Repository record for Cone Penetration Test in Unsaturated Soil with Matric Suction Measurement (opens in a new tab)

  8. Voxel octree intersection based 3D scanning

    … developments in the field of three dimensional (3D) printing have resulted in widely available low-cost 3D printers. These printers require 3D models, which are traditionally created in 3D modeling software or are created from 3D scans of existing objects. To be printable, these models must …

    lethbridge Repository record for Voxel octree intersection based 3D scanning (opens in a new tab)

  9. Accuracy of Ortho Insight 3D Digital Scanner in Mesial-Distal Tooth Measurements

    Introduction: Digital scanners and software may be used to measure mesial-distal (MD) tooth width for orthodontic diagnosis and treatment planning. Although there have been many studies performed on different digital scanners, accuracy of mesial-distal tooth measurements using the Ortho Insight 3D …

    loma-linda Repository record for Accuracy of Ortho Insight 3D Digital Scanner in Mesial-Distal Tooth Measurements (opens in a new tab)

  10. Cobot + Vision to remove plastic straps from pallets

    … Volvo provides a UR10e cobot, a Photoneo 3D-scanner and Aurora Design Assistant (ADA) to carry out this thesis. In return, Volvo requires the answer to the question whether this robot, camera, and software configuration is satisfactory to get the job done. The solution, however, needs to …

    chalmers Repository record for Cobot + Vision to remove plastic straps from pallets (opens in a new tab)

  11. Use of Approximate Set Differences to Infer the Movement of Objects in Point Clouds

    … changes was determined by testing data from a 3D scanner. The results indicate that the approximate set di erence is an e cient algorithm that can e ectively detect changes in three-dimensional data in O(n log2 n) time.

    unr Repository record for Use of Approximate Set Differences to Infer the Movement of Objects in Point Clouds (opens in a new tab)

  12. The Use of Three-Dimensional Documentation Technologies in Archaeological Applications

    … this task. An error model for a handheld 3D scanner called the DPI-7 was created. This error model reduced the errors in the in-plane directions by up to 59%. The levels of precision in two technologies, terrestrial laser scanning and computer vision assisted photogrammetry, were …

    calgary Repository record for The Use of Three-Dimensional Documentation Technologies in Archaeological Applications (opens in a new tab)

  13. NON-CONTACT SPATIALLY CONSTRAINED OPTICAL SCANNING METHODS APPLIED FOR DEPTH, WIDTH AND GAP MEASUREMENTS

    … the results with commercial systems like 3D scanner and commercial sensor. Also, the Gauge Repeatability and Reproducibility (GR&R) studies are produced to identify the gap measurement tool capabilities interms of accuracy and repeatability.

    clemson Repository record for NON-CONTACT SPATIALLY CONSTRAINED OPTICAL SCANNING METHODS APPLIED FOR DEPTH, WIDTH AND GAP MEASUREMENTS (opens in a new tab)

  14. Three-dimensional body scanning : a novel technique for body composition assessment

    … comfortable for subjects. The Three Dimensional (3D) body scanner is a new body composition assessment method that might serve as another option for investigators and practitioners. The purpose of this study was to determine the accuracy of the 3D body scanner at measuring body composition using …

    missouri Repository record for Three-dimensional body scanning : a novel technique for body composition assessment (opens in a new tab)

  15. A 3-Dimensional Approach to Projectile Point Classification

    … region in Northwest Arkansas. A structured-light 3D scanner was used to create complete 3D models of the artifacts that includes several projectile point types. This was done to improve the accuracy and replicability of measurements. Several different quantitative attributes were examined using …

    arkansas Repository record for A 3-Dimensional Approach to Projectile Point Classification (opens in a new tab)

  16. Three dimensional reconstruction of objects based on digital fringe projection

    … professionals have been working on improving 3D reconstruction algorithms to fit the high demands of various real life applications. In this thesis, we implemented a 3D scanner system based on fringe projection method. Two different methods have been implemented and used as the unwrapping …

    laurentian Repository record for Three dimensional reconstruction of objects based on digital fringe projection (opens in a new tab)

  17. Mikro 3D skenování

    … master thesis is to compare devices used for 3D scanning of micro objects with dimensions under 0,5 mm and evaluates the measured parameters in 3D scans against a reference CAD model. The theoretical part describes the principles of fringe projection, Focus-Variation, Vertical Focus Probing, …

    brno-tech Repository record for Mikro 3D skenování (opens in a new tab)

  18. Static and dynamic behaviour of joints in schistose rock

    … at the initial stage before shearing by new 3D optical-scanning equipment. The 3D-scanner data were used to estimate the joint roughness coefficient (JRC) and to reconstruct rough surface of rock discontinuities in numerical models. Three dimensional numerical models were developed using …

    qucosa-diss

  19. GPU hardware acceleration for industrial applications : using computation to push beyond physical limitations

    … limitations in devices such as microscopes and 3D-scanners. We investigate the outcome and test our methodology for the following case studies: - the narrow field of view found in microscopes. - the limited pixel-resolution available in active 3D sensing technologies such as laser scanners. The …

    ubc Repository record for GPU hardware acceleration for industrial applications : using computation to push beyond physical limitations (opens in a new tab) Download PDF for GPU hardware acceleration for industrial applications : using computation to push beyond physical limitations (opens in a new tab)

Page 1 of 7