Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"3D-Printed Material"”.

  1. Evaluation of the mechanical and the physical properties for resin 3D printed material and machinable composite

    … mechanical and physical properties of various 3D-printed resin materials and a machinable hybrid resin. MATERIALS AND METHODS: Eight 3D printing resin materials were selected for evaluation: Pac-Dent Rodin Sculpture 2.0 (RS), Pac-Dent Rodin Titan (RT), BEGO VarseoSmile Crown Plus (BVS), Desktop …

    bu Repository record for Evaluation of the mechanical and the physical properties for resin 3D printed material and machinable composite (opens in a new tab) Embargoed until 2026-11-26

  2. Closing the Phosphorus Loop with Green Infrastructure: Removal and Recovery using Amended Soils and 3D-printed Material

    … First, the P removal and recovery potential of a 3D-printed iron-embedded polylactic acid composite was investigated. In solution at pH 5, 7, and 9 and 23 ℃, the composite’s maximum P adsorption capacity (qmax) was 1.90, 1.57, and 1.83 mg-P g-media-1, respectively. In solution at pH 7 and …

    marquette Repository record for Closing the Phosphorus Loop with Green Infrastructure: Removal and Recovery using Amended Soils and 3D-printed Material (opens in a new tab)

  3. Scherhaftfestigkeit von CAD/CAM-Hybridmaterialien für die subtraktive und additive Fertigung unter Verwendung verschiedener Reparaturprotokolle

    … the increasing use of additively manufactured (3D-printed) hybrid materials for definitive restorations, the question arises whether these materials demonstrate comparable repairability to subtractively manufactured (milled) materials. The aim of this in vitro study was to evaluate the shear …

    fu-berlin Repository record for Scherhaftfestigkeit von CAD/CAM-Hybridmaterialien für die subtraktive und additive Fertigung unter Verwendung verschiedener Reparaturprotokolle (opens in a new tab)

  4. TRIBOELECTRIC GENERATOR FOR ENERGY HARVESTING

    … (PTFE) adhesive tape was constructed on 3D printed material. To improve the TENG’s performance in low frequency, ocean wave conditions, a gear system proved the concept that the relatively low frequencies of waves could be increased to produce more power from a sliding contact-mode TENG. …

    nps Repository record for TRIBOELECTRIC GENERATOR FOR ENERGY HARVESTING (opens in a new tab)

  5. Evaluation Of Flexural Strength, Modulus, Translucency, Stain Resistance, And Gloss Of Different 3D Printing Materials

    Background: 3D printing, the next step in digital dentistry, has improved the technical accuracy in treating patients. There are many advantages of 3D-printed techniques in the field of prosthodontics. It can be clearly experienced from an intraoral scanner, with its digital data, making many …

    uab Repository record for Evaluation Of Flexural Strength, Modulus, Translucency, Stain Resistance, And Gloss Of Different 3D Printing Materials (opens in a new tab)

  6. Comparison of Flexural Strength, Fracture Toughness, and Color Stability of CAD/CAM 3D-Printed Denture Base Materials to Milled and Conventional Heat-Polymerized Materials: An In Vitro Study

    … for denture base manufacturing are additive (3D-printing) and subtractive (milling) manufacturing. Milled denture bases have been proven to be comparable in their physical and mechanical properties to conventional heat-polymerized denture bases,[3-6] and in many studies found to be superior to …

    uab Repository record for Comparison of Flexural Strength, Fracture Toughness, and Color Stability of CAD/CAM 3D-Printed Denture Base Materials to Milled and Conventional Heat-Polymerized Materials: An In Vitro Study (opens in a new tab)

  7. Modeling Fatigue Behavior of 3D Printed Titanium Alloys

    … cycles lead to the formation of strain in the material which causes initiation of the crack formation this phenomenon is called fatigue. Fatigue properties are critical for structures subject to cyclic load; hence fatigue analysis is used to predict the life of the material. Fatigue analysis …

    iupui Repository record for Modeling Fatigue Behavior of 3D Printed Titanium Alloys (opens in a new tab)

  8. Χρήση της προσθετικής κατασκευής για την ανάπτυξη μικροβελονών για διαδερμική χρήση πεπτιδίων

    … is conducted in a single step in which layers of printed material is successively deposited on building platform in a controlled way and c) machinery required for carrying out manufacturing process is quite simple (a computer and a printer), while there is no need of using extra tooling or …

    greece Repository record for Χρήση της προσθετικής κατασκευής για την ανάπτυξη μικροβελονών για διαδερμική χρήση πεπτιδίων (opens in a new tab)

  9. APPLICATION OF CELLULOSE BASED NANOMATERIALS IN 3D-PRINTED CEMENTITIOUS COMPOSITES

    With the rapid development of concrete 3D printing for construction projects, it is crucial to produce sustainable 3D-printed cementitious composites that meet the required fresh and hardened properties. This study investigates the application of cellulose-based nanomaterials (CN) (i.e., abundant …

    temple Repository record for APPLICATION OF CELLULOSE BASED NANOMATERIALS IN 3D-PRINTED CEMENTITIOUS COMPOSITES (opens in a new tab)

  10. The Effects of 3D Printing Parameters and Surface Treatments on Convective Heat Transfer Performance

    … deposition of a molten thermoplastic material to create the desired part. One potential new application of fused filament fabrication is the manufacture of heat exchangers and heat sinks. This study focuses on developing baseline experimental data related to convective heat transfer …

    sdstate Repository record for The Effects of 3D Printing Parameters and Surface Treatments on Convective Heat Transfer Performance (opens in a new tab)

  11. Mechanical metamaterials with engineered responses

    … to engineer responses in mechanical metamaterials that enable new behaviors at the material level. Unlike traditional materials, mechanical metamaterials derive their unique responses to deformation from the geometry of their unit cell, rather than their composition. Furthermore, these …

    freiburg-diss Repository record for Mechanical metamaterials with engineered responses (opens in a new tab)

  12. Development Of Advanced Multi-Nozzle Multi-Material 3d Printing

    Extrusion-based 3D printing methods, such as Direct Ink Writing, are extensively utilized across sectors like biomedical, energy, and electronics, employing a diverse range of materials. However, the lengthy printing times associated with single-nozzle systems limit their application in complex …

    wayne-thes Repository record for Development Of Advanced Multi-Nozzle Multi-Material 3d Printing (opens in a new tab)

  13. Development and Analysis of 3D-Printed Synthetic Vocal Fold Models

    … creating models with more lifelike geometric and material properties. This research was conducted in four stages. First, a suitable silicone additive manufacturing technique using a UV-curable silicone was chosen. The technique chosen was called freeform reversible embedding (FRE) and involved …

    byu Repository record for Development and Analysis of 3D-Printed Synthetic Vocal Fold Models (opens in a new tab) Download PDF for Development and Analysis of 3D-Printed Synthetic Vocal Fold Models (opens in a new tab)

  14. Evaluation of shear bond strengths of various resin cements with different surface treatments to 3D printed materials

    … strength of various resin cements with different 3D printed resin materials. It also seeks to determine the effects of various surface treatments on shear bond strength. Finally, the study investigates the impact of thermocycling on shear bond strength values. Materials and Methods: This study …

    bu Repository record for Evaluation of shear bond strengths of various resin cements with different surface treatments to 3D printed materials (opens in a new tab)

  15. Evaluation of shear bond strengths of various resin cements with different surface treatments to 3D printed materials

    … strength of various resin cements with different 3D printed resin materials. It also seeks to determine the effects of various surface treatments on shear bond strength. Finally, the study investigates the impact of thermocycling on shear bond strength values.MATERIALS AND METHODS: This study …

    bu Repository record for Evaluation of shear bond strengths of various resin cements with different surface treatments to 3D printed materials (opens in a new tab)

  16. Active Rheological and Stiffening Control of Cementitious Systems for Additive Manufacturing

    … manufacturing techniques used for cementitious materials, layer-by-layer extrusion-based printing is the most used technique. For a layer-by-layer printing process, the requirements of cementitious materials vary from those of a conventional construction process. Typically, the cementitious …

    clemson Repository record for Active Rheological and Stiffening Control of Cementitious Systems for Additive Manufacturing (opens in a new tab)

  17. Material Characterization of Thermoplastic Polyurethane (TPU) and Thermoplastic Elastomers (TPE) for Development of 3D-Printed Surrogate Organs for Medical Training

    … surgical skills. The availability of surrogate 3D-printed organs would readily allow access to resources that could reduce or potentially eliminate the need for cadaveric specimens or, at a minimum, provide students the opportunity to practice with 3D-printed surrogates before transitioning to …

    wvu Repository record for Material Characterization of Thermoplastic Polyurethane (TPU) and Thermoplastic Elastomers (TPE) for Development of 3D-Printed Surrogate Organs for Medical Training (opens in a new tab)

  18. High-strength, 3D-printed Antibiotic-eluting Spacer to treat Periprosthetic Joint Infection

    … advantage of PMMA over possible alternative biomaterials is 1) the ability to mix antibiotics into the cement before molding it into a desired shape, 2) a porous structure that enables antibiotics to leach from the matrix, and 3) sufficient mechanical strength to support partial load-bearing …

    duke Repository record for High-strength, 3D-printed Antibiotic-eluting Spacer to treat Periprosthetic Joint Infection (opens in a new tab)