Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 342 for “"3D-print"”.

  1. Additive manufacturing (3D print) of air-coupled diaphragm ultrasonic transdrucers

    … are not able to satisfy their required 3D manufacturing resolution. In recent years, there has been increasing interest in using additive manufacturing (3D printing) technology to fabricate sensors and actuators due to rapid prototyping, low-cost manufacturing processes, customized …

    strathclyde Repository record for Additive manufacturing (3D print) of air-coupled diaphragm ultrasonic transdrucers (opens in a new tab)

  2. 3D print for the creation of patient-specific implants for acetabular fractures

    … sich additive Producktionsverfahren wie der 3D Druck deutlich weiterentwickelt. Diese Arbeit hat das Ziel, die Qualität der Behandlung von Azetabulumsfrakturen durch den Einsatz von 3D gedruckten Modellen zu verbessern. Ein patientenspezifisches Modell kann hier für drei Einsatzbereiche …

    lmu-germany Repository record for 3D print for the creation of patient-specific implants for acetabular fractures (opens in a new tab)

  3. CHARACTERIZATION OF 3D PRINT NICKEL BASED SUPERALLOY FOR OIL AND GAS DRILLING APPLICATIONS

    … 99.9% density was achievable with two of the printing parameters. The subsequent post heat treatment process with hot isostatic pressing was able to further improve the density level to be comparable to wrought specimen. The second part of the work will detail the variation of post heat …

    nus Repository record for CHARACTERIZATION OF 3D PRINT NICKEL BASED SUPERALLOY FOR OIL AND GAS DRILLING APPLICATIONS (opens in a new tab) Download file for CHARACTERIZATION OF 3D PRINT NICKEL BASED SUPERALLOY FOR OIL AND GAS DRILLING APPLICATIONS (opens in a new tab)

  4. NOVEL FORMULATIONS AND PROCESSING CONDITIONS TO 3D PRINT CU ALLOYS FOR NAVAL APPLICATIONS

    … of metal nanoparticles that produced a 3D printed metal object without oxidation but with material properties and corrosion resistance similar to existing approaches. The study was designed around experimentation of different liquids/viscous fluids that when mixed with metal …

    nps Repository record for NOVEL FORMULATIONS AND PROCESSING CONDITIONS TO 3D PRINT CU ALLOYS FOR NAVAL APPLICATIONS (opens in a new tab)

  5. 3D Printing Of Large-Scale Integrated Microfluidic Devices

    … Our group previously pioneered a method to 3D print microfluidic channels and valves by extruding silicone filaments in angular stacks. This technique faced limitations in scaling due to slow printing speed (1 mm/s) and inability to generate multiplexed flows. Here, we present an approach to …

    umn Repository record for 3D Printing Of Large-Scale Integrated Microfluidic Devices (opens in a new tab)

  6. Effects Of Surface Noise On Printing Artifacts: An Artistic Approach To Hiding Print Artifacts

    … the quality of Fused Filament Fabrication (FFF) 3D printing by using fractal noise to mask certain print artifacts (e.g. layer lines and stair-stepping). The use of textures is quite common in digital sculpting for aesthetic reasons. This study focuses on finding specific textures that minimize …

    clemson Repository record for Effects Of Surface Noise On Printing Artifacts: An Artistic Approach To Hiding Print Artifacts (opens in a new tab)

  7. DESIGN, MANUFACTURE, AND IMPLEMENTATION OF 3D-PRINTED TISSUE ENGINEERING SCAFFOLDS USED WITH STROMAL VASCULAR CELLS FOR CRANIOFACIAL BONE REGENERATION

    … novel osteoinductive biomaterial, the methods to 3D-print the biomaterial, and the tools to design of that 3D-printed scaffold for the mechanical loads of the craniofacial skeleton. Further, it combines the scaffold with key regenerative agents – autologous stem cells – to facilitate boney …

    jhu Repository record for DESIGN, MANUFACTURE, AND IMPLEMENTATION OF 3D-PRINTED TISSUE ENGINEERING SCAFFOLDS USED WITH STROMAL VASCULAR CELLS FOR CRANIOFACIAL BONE REGENERATION (opens in a new tab)

  8. The Processing of Binder Jet Multi-Material 3D Printing to Improve upon Material Properties

    … quality products arises. The technology to 3D print has been in around since the 1970’s, and thanks to Scott Crump as of 1989, it is possible to 3D print in layers to obtain a solid component. In today’s present time, we now can multi-material 3D print. However, even though we have the …

    clemson Repository record for The Processing of Binder Jet Multi-Material 3D Printing to Improve upon Material Properties (opens in a new tab)

  9. Development of 3D-Printed Patient Specific Bolus For Clinical Use In to tal Scalp Irradiation

    … develop and validate the use of patient-specific 3D-printed bolus caps for TSI. 3D-printing materials were studied to find materials suitable for use as a bolus cap. Clinical workflows were developed to 3D-print two bolus caps for an anthropomorphic head phantom: one printed using an in-house 3D …

    uthsc Repository record for Development of 3D-Printed Patient Specific Bolus For Clinical Use In to tal Scalp Irradiation (opens in a new tab)

  10. Creating optically stimulated luminescence 3D printing filament and synthesizing radiosensitive optically stimulate luminescence crystals

    … close to the patient surface. Boluses are 3D printed to minimize air gaps between the patient and the bolus to deliver the dose accurately. Optically stimulated dosimeters (OSLD) are passive dosimeters that collect dosimetric information and are read later by using a stimulating laser to …

    colostate Repository record for Creating optically stimulated luminescence 3D printing filament and synthesizing radiosensitive optically stimulate luminescence crystals (opens in a new tab)

  11. Additive manufacturing of thermosetting polymer nanocomposites

    … work demonstrated an innovated approach to 3D-print polyurethane (PU) thermoset. A long pot-life base formulation was prepared from uretdione and 3-arm polyols. To enable the 3D-printability of base formulation, rheology modifiers were used as additive. There are two approach have been …

    iastate Repository record for Additive manufacturing of thermosetting polymer nanocomposites (opens in a new tab)

  12. 3D Modeling Techniques for Print and Digital Media

    … I looked to gain skills using ZBrush to create 3D models, 3D scanning, and 3D printing. The models created compared the hearts of several vertebrates and were intended for students attending Comparative Vertebrate Anatomy . I used several resources to create a model of the human heart and was …

    rit Repository record for 3D Modeling Techniques for Print and Digital Media (opens in a new tab)

  13. Determining Suitability of Additive Manufacturing of Carotid Artery Geometry for Flow Phantom Construction

    … discussed. It was found that it was possible to 3D print flexible vessels with a density similar to that of human tissue and use them in a flow circuit. There is huge potential for AM to be explored further in flow phantom applications.

    dundee Repository record for Determining Suitability of Additive Manufacturing of Carotid Artery Geometry for Flow Phantom Construction (opens in a new tab) Download PDF for Determining Suitability of Additive Manufacturing of Carotid Artery Geometry for Flow Phantom Construction (opens in a new tab)

  14. MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF MARAGING STEEL SAMPLES PRODUCED BY ADDITIVE MANUFACTURING (3D PRINTING)

    … uses a standard triangle language (STL) file to 3D print a part layer by layer. A high-power laser is used to melt metal particles to obtain fully dense parts. This work studied the mechanical and microstructural properties of SLM parts by performing tensile and microhardness tests, along with …

    nps Repository record for MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF MARAGING STEEL SAMPLES PRODUCED BY ADDITIVE MANUFACTURING (3D PRINTING) (opens in a new tab)

  15. Digital Light Processing of Liquid Crystal Elastomers

    … the use of digital light processing (DLP) to 3D print LCE thin film actuators. Through sliced printing followed by the layer-by-layer accumulation, we simultaneously achieve the purpose of ensuring accuracy (the thickness of each layer is 10-20 um) and breaking the LCE film thickness limit …

    cornell Repository record for Digital Light Processing of Liquid Crystal Elastomers (opens in a new tab)

  16. Automatic Pill Dispenser

    … viability and capability of the proposed design. 3D models were also created in the same program to not only showcase the details of the team's design, but to also prepare for the manufacturing process. The team's plan was to procure all electronic components, then 3D print the remaining physical …

    unr Repository record for Automatic Pill Dispenser (opens in a new tab) Embargoed until 9999-12-31

  17. A method to assess the application of additive manufacturing to inventory replenishment : a thesis presented in partial fulfilment of the requirements for the Master of Supply Chain Management at Massey University, Albany, New Zealand

    … the use of additive manufacturing to 3D print items on demand and therefore mitigate the inventory carrying and associated costs. This research has been applied to a Hydraulic Equipment Business in New Zealand, which was tested through an inequation that models the traditional …

    massey Repository record for A method to assess the application of additive manufacturing to inventory replenishment : a thesis presented in partial fulfilment of the requirements for the Master of Supply Chain Management at Massey University, Albany, New Zealand (opens in a new tab)

  18. Die Genauigkeit der menschlichen Hand im Vergleich mit einem Mikromanipulator- präklinische Evaluation für die Ohrchirurgie

    … of the stapedial footplate on a modified 3D print of a human skull in a mock OR. Each trial was repeated more than 200 times aiming manually and using a micro-manipulator. Data of over 4000 measurements was tested and graphically processed. Work strain was evaluated with a questionnaire. …

    qucosa-diss

Page 1 of 18