Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 62 for “"4 point bending"”.
-
Bond strength of different zirconia-veneering combinations (4-point bending interfacial fracture test)
Bei vollkeramischen Restaurationen wurde eine beträchtliche Anzahl Keramikfrakturen bei Verblendkeramiken aus Keramiksubstraten festgestellt. Daher sollte in dieser Studie die durch Zirkoniumoxid-Verbund gestützte Bindungsfestigkeit der Keramik an das Zirkoniumoxid untersucht werden, um zu …
-
Adhesively Bonded Steel Structures
… used as reference. The beams were tested in 4-point bending in computer simulations and in experimental tests. The weld bonded beams were compared with the resistance spot welded beams, in order to distinguish which combination was able to reduce the deformation. The possibility to increase …
-
Effect of the Length of the superficial plate in stacked veterinary cuttable plate constructs: An in vitro study on the bending strength and stiffness, and on the strain distribution
… construct were randomly tested for failure in 4-point bending and axial loading. Stiffness, load at yield, and work until failure were measured. In phase two, strains were recorded during elastic deformation for each configuration. During both testing methods, stiffness, load at yield and work to …
-
Adhesion strength testing – An improved approach
… Develop and validate a test protocol based on 4-point bending that may be used to examine the bonding of various dental materials to a range of substrates, taking dentine, stainless steel and aluminium alloy as examples. Methods: An improved approach for static flexural strength of ‘adhesive’ …
-
Interface Shear Transfer in Reinforced Concrete Members: Code Evaluation, Modeling, and Testing
… notched test specimens. In this research, the 4-point bending test method, as proposed by Iosipescu in 1967, was investigated to study IST. The 4-point bending test created direct shear by strategically placing the supports and loads on a beam. It had the advantages of using test specimens that …
-
Time-dependent behaviour of precast concrete sandwich panels
… to failure was conducted. The panels under 4-point bending exhibited partial composite action and suffered typical flexural failure via yielding of steel reinforcement. The panels under eccentric axial compression showed nonlinear behaviour and failed by a limit-point type of buckling failure. …
-
Mechanical Properties And Thermal Residual Stresses Of Zrb2-sic Ceramic Composites For Hypersonic Vehicle Applications
… and bulk moduli, along with Poisson’s ratio, 4-point bending strength, and single edge V-notched beam (SEVNB) fracture toughness were measured. In addition, in-situ bending experiments under a Raman microscope were performed to determine the piezo-spectroscopic coefficients of SiC Raman active …
-
Effects Of Stress Ratios On Polymer Composite Fatigue
… by burn off test and material strength by 4 point bending static testing. Four point bending fatigue tests were conducted at different stress ratios (min stress/max stress). S-N curve analysis, stiffness degradation analysis, model fit with desirable fatigue model and image processing has …
-
Reliability and failure analysis of composite beams and plates containing stress concentrations
… stress analysis of isotropic beams under four point bending and composite plates under in-plane loading, a finite element analysis program F2DELAST based on two-dimensional elasticity theory was developed and verified with existing literature and also by a commercial finite element code ABAQUS. …
-
Comparison of Flexural Cracking in Reinforced Concrete Beams with Different Rebar Coatings
… were subjected to a sustained load in 4-point bending for up to one week. During this time, cracks and displacement were monitored and documented. Then, the beams were loaded to failure to compare their load-displacement responses. The length and width of cracks as well as the number and …
-
Analysis of Strength Variation in Glass Due to Ion Exchange
… All samples were then tested to failure in 4-point bending to assess the resulting Modulus of Rupture (MOR). Statistical analysis techniques and Weibull analysis were used to study the variations which occur within and between strength distributions of each sample group. A smaller sampling of …
-
Shear and Bending Strength of Cold-Formed Steel Solid Wall Panels Using Corrugated Steel Sheets for Mobile Shelters
… forces. The full-scale tests also included 4-point bending tests which was designed to investigate the wall panel's resistance to the lateral loads applied perpendicularly to the surface. The research discovered that the singled sided resistance spot weld achieved similar performance as the …
-
Development, Experimental Validation, and Progressive Failure Modeling of an Ultra-Thin High Stiffness Deployable Composite Boom for in-Space Applications
… modes of a boom under repetitive pure bending loads using 4-point bending setup. The material and fabrication challenges for Ultra-thin, High Stiffness (UTHS) Composite Boom are discussed in detail. Continuum Damage Mechanics (CDM) model for the beam is calibrated using experimental …
-
Estudo da heterogeneidade do concreto em função da hidratação
… the same degree of hydration. Compression and 4 point bending tests were performed at different times, associating the results with hydration. Trend curves were determined from statistical software that related the degree of hydration to mechanical properties (compressive and tensile strength, …
-
Flexural Behavior of Laterally Damaged Full-Scale Bridge Girders Through the Use of Carbon Fiber Reinforced Polymers (CFRP)
… tested under static loading to failure under 4-point bending. Different CFRP configurations were applied to each of the girders. Each of the test girders performed very well as each of them held a higher capacity than the control girder. The repaired girders 5, 6 and 7 surpassed the control …
-
Validation of a feline femoral bone surrogate with mechanical and clinical evaluation of feline orthopedic implants
… Following testing in both torsion and 4-point bending, the I-Loc nail was evaluated in 30 clinical feline trauma cases.Fracture gap constructs were implanted with an I-Loc (3 or 4 mm), Targon (2.5 or 3.0 mm) or LCP (2.0 or 2.4 mm) and mechanically compared. Additionally, explanted …
-
Análise do comportamento mecânico de espumas cerâmicas a base de alumina obtidas pelo método da réplica
… characterized by mechanical strength tests on 4-point bending and compression, density and porosity and by scanning electron microscopy. From these results it was evaluated the mechanical strength behavior compared to Gibson and Ashby model for solid cellular structure and was proposed a …
-
Fatigue Characterization of Asphalt Mixes with Polymer Modified Asphalt Cement
… of asphalt mixes with PMAC using the 4 point-bending beam (4PB) test to determine the fatigue performance of asphalt mixtures. The classical fatigue “WÖHLER’’ curve and “DGCB” damage rate method, which was developed at Département Génie Civil et Bâtiment in Lyon, have been used to …
-
CHARACTERIZATION AND NUMERICAL MODELING OF ADVANCED AUTOMOTIVE LIGHTWEIGHTING MATERIALS
… standard and custom testing facilities. The 4-point bending, uniaxial tension and plane-strain tension tests are conducted to assess the elastic and plastic anisotropy and the degradation of elastic modulus after plastic deformation. Experiments are performed on typical automotive steels, …
Page 1 of 4