Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"5-axis machining"”.

  1. 3-Axis and 5-Axis Machining with Stewart Platform

    … to control a Stewart Platform to achieve the machining purposes. Calibration of the accuracy of the developed NC postprocessor program has been performed based on actual 3-axis and 5-axis machining processes performed on the Stewart Platform. A machining frame with a spindle was designed and …

    nus Repository record for 3-Axis and 5-Axis Machining with Stewart Platform (opens in a new tab) Download file for 3-Axis and 5-Axis Machining with Stewart Platform (opens in a new tab)

  2. Spline interpolation and contour error pre-compensation for 5-axis machining

    … pre-compensation algorithms developed for 5-axis machine tools. In the smooth spline interpolation algorithm, the cutter location data from the computer-aided manufacturing system is first fitted independently to decouple the relative changes in position and orientation. The tool tip …

    ubc Repository record for Spline interpolation and contour error pre-compensation for 5-axis machining (opens in a new tab) Download PDF for Spline interpolation and contour error pre-compensation for 5-axis machining (opens in a new tab)

  3. Voxel-based tool sequence optimization for 5-axis machining using high performance computing

    … for tool sequence optimization in the case of 5-axis machining. Most of the reported work suggests tooling optimization methods involving parametric surfaces and CPU-enabled algorithms. In the current work, a novel voxel-based approach is presented. The main advantage of this 3D-representation is …

    gatech Repository record for Voxel-based tool sequence optimization for 5-axis machining using high performance computing (opens in a new tab)

  4. Tool Path Modification Approaches to Enhance Machining Geometric Accuracy in 3-Axis and 5-Axis Machining

    … the general error sources that influence the machining geometric accuracy [Kakino et al., 1993]. Broadly, machining geometric errors are caused by two major error sources: motion errors of the machine tool system and errors due to the machining process. The key factors among error sources in …

    kyoto Repository record for Tool Path Modification Approaches to Enhance Machining Geometric Accuracy in 3-Axis and 5-Axis Machining (opens in a new tab)

  5. Smooth trajectory generation and precision control of 5-axis CNC machine tools

    … precision control algorithms developed for 5-axis machine tools. A feedrate scheduling algorithm has been introduced to minimize the cycle time for 5-axis machining of curved tool-paths. The variation of the feed along the tool-path is expressed in a cubic B-spline form as a function of the …

    ubc Repository record for Smooth trajectory generation and precision control of 5-axis CNC machine tools (opens in a new tab) Download PDF for Smooth trajectory generation and precision control of 5-axis CNC machine tools (opens in a new tab)

  6. 5-axis coverage path planning with deep reinforcement learning and fast parallel collision detection

    5-axis machining is a strategy that allows computer numerical control (CNC) move an object or cutting tool along five different axes (X, Y, Z and two additional rotary axes) simultaneously. This provides infinite possibilities of machining very complex objects, which is why 5-axis machining gets …

    gatech Repository record for 5-axis coverage path planning with deep reinforcement learning and fast parallel collision detection (opens in a new tab)

  7. Surface Partitioning for 3+2-axis Machining

    Despite the inbuilt advantages offered by 5-axis machining, the manufacturing industry has not widely adopted this technology due to the high cost of machines and insufficient support from CAD/CAM systems. Companies are used to 3-axis machining and the operators are in many cases not yet ready for …

    waterloo Repository record for Surface Partitioning for 3+2-axis Machining (opens in a new tab)

  8. Tool path generation for CNC machining of free-form surfaces

    Using shorter tool traversing paths in the machining of free-form surfaces can reduce not only machining time, but also tool wear and the risk of tool breakage. In this thesis, a new tool path generation algorithm to adaptively machine free-form surfaces with shorter tool path lengths is developed …

    nus Repository record for Tool path generation for CNC machining of free-form surfaces (opens in a new tab) Download file for Tool path generation for CNC machining of free-form surfaces (opens in a new tab)

  9. AUTOMATED FIVE-AXIS TOOL PATH GENERATION BASED ON DYNAMIC ANALYSIS

    In this thesis, automated 5-axis tool path generation considering true dynamic factors (cutting force and chatter) is studied. The research objectives are to develop models for predicting cutting forces and chatter in 5-axis milling and algorithm for optimizing the cutter posture at each cutter …

    nus Repository record for AUTOMATED FIVE-AXIS TOOL PATH GENERATION BASED ON DYNAMIC ANALYSIS (opens in a new tab) Download file for AUTOMATED FIVE-AXIS TOOL PATH GENERATION BASED ON DYNAMIC ANALYSIS (opens in a new tab)

  10. A multi-disciplinary optimisation model for passenger aircraft wing structures with manufacturing and cost considerations

    … manufacturing constraints are imposed, the extra machining cost can erode the advantages of the reduced weight. As manufacturing cost includes material cost and machining cost, whilst reducing weight can reduce the material cost, if the manufacturing complexity increases greatly as a result the …

    salford Download PDF for A multi-disciplinary optimisation model for passenger aircraft wing structures with manufacturing and cost considerations (opens in a new tab)

  11. Automated Process Planning for Five-Axis Point Milling of Sculptured Surfaces

    … an automated process planning system for 5-axis point milling of sculpture surfaces (finish cut) are presented. Based on existing research, workflow for process planning was carefully planned out, with optimization and improvements in the following areas: Firstly, a new representation scheme …

    nus Repository record for Automated Process Planning for Five-Axis Point Milling of Sculptured Surfaces (opens in a new tab) Download file for Automated Process Planning for Five-Axis Point Milling of Sculptured Surfaces (opens in a new tab)

  12. Machining Chatter in Flank Milling and Investigation of Process Damping in Surface Generation

    … of research exists on geometrical aspects of 5-axis flank milling, the dynamics of this efficient milling operation have not yet been given proper attention. In particular, investigating machining chatter in 5-axis flank milling remains as an open problem in the literature. The axial depth of …

    waterloo Repository record for Machining Chatter in Flank Milling and Investigation of Process Damping in Surface Generation (opens in a new tab)

  13. Development of Two Cooperative Stewart Platforms for Machining

    … such manufacturing applications especially for machining and positioning. PKMs have inherent properties for machining applications, but the main constraint of PKMs is the limited workspace. In this study, cooperative manipulators comprising a configuration of two Stewart platforms is built. One …

    nus Repository record for Development of Two Cooperative Stewart Platforms for Machining (opens in a new tab) Download file for Development of Two Cooperative Stewart Platforms for Machining (opens in a new tab)

  14. Řešení technologie při výrobě odlitku v malé strojírenské firmě

    Tato diplomová práce se zaměřuje na navržení a optimalizace slévárenské technologie odlitku a výroby konkrétního modelu pro daný odlitek. Návrh technologie a sestavení soustavy formy ve 3D za pomocí CAD sytému. Simulace lití v CAE systému MAGMAsoft® a vyhodnocení navržené technologie odlitku. …

    brno-tech Repository record for Řešení technologie při výrobě odlitku v malé strojírenské firmě (opens in a new tab)

  15. Virtual Model Building for Multi-Axis Machine Tools Using Field Data

    … models are the foundation of many advanced machining technologies such as virtual process planning and machine condition monitoring. Viewing recent designs of modern high-performance machine tools, to enhance the machine versatility and productivity, the machine axis configuration is …

    waterloo Repository record for Virtual Model Building for Multi-Axis Machine Tools Using Field Data (opens in a new tab)

  16. Smooth trajectory generation for 5-axis CNC machine tools

    … format. The first paper presents an accurate machining feedrate prediction technique by modeling the trajectory generation behaviour of modern CNC machine tools. Typically, CAM systems simulate machines’ motion based on the commanded feedrate and the path geometry. Such approach does not …

    whiterose Download PDF for Smooth trajectory generation for 5-axis CNC machine tools (opens in a new tab)

  17. Racionalizace obrábění skříní převodovek

    Obsahem práce je navržení technologie obrábění s použitím obráběcích center, využívající pět řízených os. Změna plynoucí ze zavedení této technologie je zkoumána na skříni jednostupňové převodovky, která je součástí výrobků vyráběných ve společnosti. V první části práce jsou rozebrány obecné …

    brno-tech Repository record for Racionalizace obrábění skříní převodovek (opens in a new tab)

  18. Dynamic Model Identification and Trajectory Correction for Virtual Process Planning in Multi-Axis Machine Tools

    … against its competitors. Specifically, in the machining industry, the ability to simulate the dynamic performance of machine tools, and the physics of cutting processes, is critical to taking corrective actions, achieving process and productivity improvements, thereby enhancing competitiveness. …

    waterloo Repository record for Dynamic Model Identification and Trajectory Correction for Virtual Process Planning in Multi-Axis Machine Tools (opens in a new tab)

  19. Analýza obráběcích strategií při 5osém obrábění tenkostěnných dílů

    Tato bakalářská práce se zabývá optimalizací 5osého dokončovacího frézování tenkostěnných lopatek turbínového kola. Cílem bylo navrhnout a experimentálně ověřit strategie obrábění, které zohledňují proměnlivou tuhost obrobku a umožňují zvýšení rozměrové a tvarové přesnosti bez ztráty produktivity. …

    brno-tech Repository record for Analýza obráběcích strategií při 5osém obrábění tenkostěnných dílů (opens in a new tab)

  20. Návrh CNC otočného stolu s kolébkou

    Bakalářská práce Návrh CNC otočného stolu s kolébkou si klade za cíl návrh konstrukce zařízení umožňujícího pětiosé obrábění. První část práce je zaměřena na rešerši v oblasti kinematických struktur otočných stolů s kolébkou a krátké shrnutí významných výrobců těchto zařízení. Druhá část práce je …

    brno-tech Repository record for Návrh CNC otočného stolu s kolébkou (opens in a new tab)