Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 74 for “"5.8 GHz"”.

  1. PLL Design at 5.8 GHz

    … generates two signals, at the ISM Band 5.8 GHz can be used for many purposes. ETC (Electronic Toll Collection), Traffic Control, thickness measurement are some examples that use ISM bands. The project s aim is to investigate and design a Double PLL at 5.8 GHz which can be used as a part of …

    chalmers Repository record for PLL Design at 5.8 GHz (opens in a new tab)

  2. Microwave-energy harvesting at 5.8 GHz for passive devices

    … Using this methodology, a low-power 5.8 GHz rectenna showed an output power improvement of over 20 dB at -20 dBm input power using a 3-POW (power-optimized waveform) compared to continuous waveforms (CW). The resultant efficiency is the highest reported efficiency for low-power 5.8 GHz …

    gatech Repository record for Microwave-energy harvesting at 5.8 GHz for passive devices (opens in a new tab)

  3. High Linearity 5.8 Ghz Power Amplifier With An Internal Linearizer

    A 5.8 GHz RF Power Amplifier (PA) is designed and fabricated in this work, which has very high linearity through a built-in linearizer. The PA is designed, post-layout simulated by Agilent Advanced Design System (ADS) software and fabricated by Win-Semiconductors 0.15µm pHEMT process technology. …

    ucf Repository record for High Linearity 5.8 Ghz Power Amplifier With An Internal Linearizer (opens in a new tab)

  4. Part 15 compliant frequency hopping backscatter communication at 5.8 GHz

    … communications system operating in the 5.8 GHz ISM band, that satisfies the requirements of 47 CFR 15.247 then conduct RF measurements and testing to confirm the system meets Part 15 requirements.

    gatech Repository record for Part 15 compliant frequency hopping backscatter communication at 5.8 GHz (opens in a new tab)

  5. Investigation of reflectarray design techniques for 5.8 GHz Fresnel zone power beaming

    Large-scale wireless power transfer using microwaves is a promising technology for power transmission over distances unsuited for physical wire connections, such as between orbit and the Earth. Using large transmitting and receiving apertures, it is possible to focus microwave energy to achieve …

    gatech Repository record for Investigation of reflectarray design techniques for 5.8 GHz Fresnel zone power beaming (opens in a new tab)

  6. Study of antenna structures with small dimensions at 5.8 GHz ISM Band

    In recent days, the microstrip antenna is getting more and more attention because of its small dimension, negligible weight, ease of fabrication and option to integrate with active circuits and most of all low cost to produce. The other features those the microstrip antennas offer are ease of …

    chalmers Repository record for Study of antenna structures with small dimensions at 5.8 GHz ISM Band (opens in a new tab)

  7. Holographic transmit reflect array at 5.8 GHz for wireless power transfer in the Fresnel Zone

    This thesis presents the design and simulation of four square holographic reflectarrays consisting of circular patches for wireless power transfer (WPT) in the Fresnel region. The design includes the calculation of the phase reflection response from different variations of patches and substrate …

    gatech Repository record for Holographic transmit reflect array at 5.8 GHz for wireless power transfer in the Fresnel Zone (opens in a new tab)

  8. A Novel, 2.4 and 5.8GHz Dual-band, 2-Stage RF-DC Charge-pump with Load-tuned Transmission Lines for DC Output Boost

    … for wireless energy harvesting in 2.4 and 5.8 GHz bands is proposed. The first novelty here is in the use of optimal length transmission lines on the load side of the 4 half-wave rectifying stages that make up the 2-stage RFCP topology. Simulations and measurements show that doing so boosts the …

    calgary Repository record for A Novel, 2.4 and 5.8GHz Dual-band, 2-Stage RF-DC Charge-pump with Load-tuned Transmission Lines for DC Output Boost (opens in a new tab)

  9. Hochfrequenz‐Kommunikation gedruckter Antennen in herausfordernden dielektrischen oder metallischen Umgebungen

    … MHz‐(Reflektor)‐Antennenkonfigurationen und 5.8 GHz‐3D‐Dipol‐ Antennendesigns zur Erhöhung der Kommunikationsfähigkeit untersucht und beschrieben. Dabei werden hinsichtlich der 868 MHz‐Längsstrahler‐Antennenkonfiguration, zur Funktion in direkter metallischer Umgebung, Performance mindernde …

    qucosa-diss

  10. Design of reconfigurable intelligent surface for 5G wireless communication system

    … 25 elements RIS, has operating frequency at 5.8 GHz, is designed and simulated by using full-wave simulator. The unit cell of the prototype design can be controlled by using a RF switch, which can switch between two states, [0, 180], to change the reflectivity of the surface to apply a 180-degree …

    uiuc Repository record for Design of reconfigurable intelligent surface for 5G wireless communication system (opens in a new tab)

  11. NUEVOS SISTEMAS RADIANTES REALIZADOS CON TECNOLOGÍAS IMPRESAS

    … selected. For satellite communications at 5.8 GHz, two types of antennas with circular polarization are proposed. The former is a square patch with a diagonal slot, the latter is a polarization reconfigurable antenna fabricated with LTCC technology. For the operation in Ku band at 17 GHz, slot …

    upv Repository record for NUEVOS SISTEMAS RADIANTES REALIZADOS CON TECNOLOGÍAS IMPRESAS (opens in a new tab)

  12. Analysis and Design of a Highly Compact Ellipse-Shaped Ultra-Wideband Bandpass Filter (Uwb-Bpf) with a Notched Band

    … endorsement of the frequency band of 3.1 – 10.6 GHz in 2002 to be unlicensed for wireless communication applications, various ultra-wideband bandpass filters (UWB-BPFs) have been proposed and designed. Different UWB-BPF configurations were presented in the past years to meet the very strict …

    south-carolina Repository record for Analysis and Design of a Highly Compact Ellipse-Shaped Ultra-Wideband Bandpass Filter (Uwb-Bpf) with a Notched Band (opens in a new tab)

  13. A Long-range Fine-scale RF Positioning System Using Tunneling Tags

    … positioning method and Tunneling tags at 5.8 GHz breaks the range limit of fine-scale RFID positioning systems. A frequency hopping reader operating in the 5.8 GHz Industrial, Scientific and Medical (ISM) band is designed and implemented in this work. Experimental results yield a …

    gatech Repository record for A Long-range Fine-scale RF Positioning System Using Tunneling Tags (opens in a new tab)

  14. MU-MIMO WLANs in Diverse Bands and Environments

    … characteristics of the highly variable 2.4/5.8 GHz transmission scenarios for efficient MU-MIMO overhead amortization. While PUMA results in significant MU-MIMO capacity gains for 2.4/5.8 GHz indoor environments, it will not allow UHF-band indoor and outdoor MU-MIMO transmissions to reach their …

    rice Repository record for MU-MIMO WLANs in Diverse Bands and Environments (opens in a new tab)

  15. An Analysis of Electric Field Strength for Planning Indoor Wireless Networks at Various Frequencies

    … at various frequencies, specifically 5.8 GHz, 2.4 GHz, 868 MHz and 433 MHz. The distribution of the E- field strength within the building has been obtained using the FEKO simulation suite. The methods used in the simulation are geometrical optics and the uniform theory of diffraction. The …

    whiterose Download PDF for An Analysis of Electric Field Strength for Planning Indoor Wireless Networks at Various Frequencies (opens in a new tab)

Page 1 of 4