Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"5.9 GHz"”.
-
Channel Propagation Model for Train to Vehicle Alert System at 5.9 GHz using Dedicated Short Range Communication
The most common railroad accidents today involve collisions between trains and passenger vehicles at railroad grade crossings [1][2]. Due to the size and speed of a train, these collisions generally result in significant damage and serious injury. Despite recent efforts by projects such as …
-
Feasibility Study and Performance Evaluation of Vehicle-to-Everything (V2X) Communications Applications
… communications, and it operates in the 5.9 GHz band. In addition to DSRC radios, other potential uses of this band include Wi-Fi, LTE-V, and communication among unlicensed devices. This dissertation presents an architecture and a feasibility analysis including field measurements and analysis …
-
Coexistence of Wireless Systems for Spectrum Sharing
… and Fixed Satellite Service (FSS) at 27.5-28.35 GHz (28 GHz); 5G and Fixed Service (FS) at 71-76 GHz (70 GHz); vehicular communications and Wi-Fi at 5.85-5.925 GHz (5.9 GHz); and mobile broadband communications and radar at 3.55-3.7 GHz (3.5 GHz). The results presented in each of the …
-
Novel Approach to Integrate CAN Based Vehicle Sensors with GPS Using Adaptive Filters to Improve Localization Precision in Connected Vehicles from a Systems Engineering Perspective
… allocation of 75 MHz radio spectrum in the 5.9 GHz band by the Federal Communication Commission (FCC) dedicated to Intelligent Transportation Systems (ITS) in 1999 and 30 MHz in the 5.9 GHz by the European Telecommunication Standards Institution (ETSI). Many applications have been tested and …
-
Measurement, Modeling, and OFDM Synchronization for the Wideband Mobile-to-Mobile Channel
… mobile-to-mobile measurement campaign in the 5.9 GHz frequency band. For this purpose we developed a channel sounding system including a novel combined waveform. In order to quantify and qualify either the recorded channel or the proposed generated channel, we developed a simulation test-bed that …
-
IEEE 802.11ad V2V-radar : a joint vehicle-to-vehicle communication and automotive radar system
… such as forward collision detection in the 5.9 GHz band. The DSRC technology supports only low data rates, which is not sufficient to handle the gigabytes that can be generated in the next generation vehicles. This challenge can, however, be overcome by using mmWave V2V communication technology …
-
Studies In Nanomagnetism: Co/Ni Multilayers In Magnetic Tunnel Junctions, Nanomagnets In Superconducting Microwave Cavities, And Magnetic Multilayer Nanowires
… the cavity showed a quality factor of 566 at 5.9 GHz. In the third project, I designed an electrically switchable three-terminal device for injecting spin currents into semiconductors. The device consists of a multilayer magnetic nanowire with a domain wall that can be moved by spin-torque …
-
Cross-Layer Performance Evaluation of C-V2X
… reallocate spectrum bands, particularly the "5.9 GHz band" previously allocated to V2X, have raised concerns within the CV2X community. With only 40% of the original bandwidth retained for V2X communication (equivalent to 30 MHz), doubts arise regarding the adequacy of this spectrum allocation to …
-
MINIATUIRIZED ULTRA-WIDEBAND ANTENNAS FOR WIRELESS COMMUNICATIONS
… (FCC) assigned a frequency spectrum from 3.1 GHz to 10.6 GHz for ultra-wideband communications. Several narrowband antennas require to cover the entire range. Unlike narrowband antennas, ultra-wideband antennas need to cover the wide frequency band. This research mainly focuses on physically …
-
Μοντελοποίηση και προσομοίωση ασύρματου δικύου επικοινωνίας εντός οδικού περιβάλλοντος (IEEE 802.11p), σχεδίαση με χρήση της γλώσσας VHDL (IEEE 1076) και υλοποίηση σε XILINX FPGA
… infrastructure in the licensed ITS band of 5.9 GHz (5.850-5.925 GHz). The standard is going to be published at the beginning of 2010. In the first chapters, the 802.11p standard was presented by analyzing the physical layer’s specifications and its operations. Performance analysis of PHY model …
-
A Novel Hybrid Deep Learning Approach for RFI Detection
… in certain frequency bands, such as the 5 GHz range (5.1-5.9 GHz U-NII bands), faces unique interference issues. This spectrum segment is vital for many 5G services yet is heavily shared with other widely used technologies, such as Wi-Fi and Internet of Things (IoT) devices. Such …
-
Coexistence of Vehicular Communication Technologies and Wi-Fi in the 5 and 6 GHz bands
… This has been true ever since the 2.4 GHz band and parts of the 5 GHz bands were first opened for unlicensed access worldwide. In recent years, the 5 GHz unlicensed bands have been one of the most coveted for launching new wireless services and applications due to their relatively …
-
MIMO Antenna Systems for Wireless Handheld Devices
… on the slots. The antenna was optimized for 5-GHz Wi-Fi operation with a relative frequency tuning range of 15% extending from 5.1 GHz to 5.9 GHz. MIMO performance analysis and effect of mobile phone components were also investigated demonstrating performance.
-
Radio-frequency integrated-circuit design for CMOS single-chip UWB systems
… over an extremely wide bandwidth. Within DC-10 GHz, 10-18 GHz, and 18-20 GHz, the developed CMOS T/R switch exhibits insertion loss of less than 0.7, 1.0 and 2.5 dB and isolation between 32-60 dB, 25-32 dB, and 25-27 dB, respectively. The measured 1-dB power compression point and input …
-
Μοντελοποίηση και ανάπτυξη ετερογενών κινητών δικτύων οχήματος-προς-όχημα (Vehicle-to-Vehicle) και οχήματος-προς-υποδομή (Vehicle-to-Infrastructure) με έμφαση σε δύσκολα περιβάλλοντα μετάδοσης
… channel model which operates at 5.4 - 5.9 GHz frequency band was selected for railways and motorways tunnel applications. The second main objective of the present thesis was to design a handover algorithm in order to optimize the performance in conditions where vehicles - trains are …
-
Power Amplifier Designs For 5g V2x Wireless Communications And Sdr Transmitter Development
… Amplifier (SDPA) architectures designed for 5.9 GHz frequency in 5G V2X communication using CMOS technology. The SDPAs utilize a balun as a replacement for the transformer and feature reduced area and cost compared to conventional parallel DPAs. Another solution to achieve a highly efficient …
-
Epitaxial aluminum scandium nitride on molybdenum electrodes for bulk acoustic wave resonators
… frequency (RF) filters, particularly in the 3.3 GHz to 5.9 GHz range driven by 5G telecommunications, has led to an interest in bulk acoustic wave (BAW) resonators exhibiting high effective electromechanical coupling coefficient (keff2) and high quality factor (Q). While aluminum nitride (AlN) …
-
Capacity analysis in different systems exploiting mobility of VANETs
… (FCC) allocated a 75 MHz spectrum at 5.9 GHz for vehicular communications, the vehicular ad hoc network (VANET), as an instantiation of the mobile ad hoc network (MANET) with much higher node mobility, opens a new door to combat the road fatalities. In VANETs, a variety of applications …
-
Security and Privacy Preservation in Vehicular Social Networks
… (FCC) has allocated a 75 MHz spectrum at 5.9 GHz for vehicular communications, opening a new door to combat the road fatalities by letting vehicles communicate to each other on the roads. Those communicating vehicles form a huge Ad Hoc Network, namely Vehicular Ad Hoc Network (VANET). In …