Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"600W"”.
-
Diseño y simulación de un banco de pruebas para evaluar el rendimiento de turbinas eólicas de eje horizontal de hasta una potencia de 600W
Actualmente, la matriz energética global está gobernada por la generación de energía con recursos no renovables. La desventaja de estos recursos es que tardan varios miles de años en formarse y no pueden reemplazarse tan rápidamente como se utilizan hoy. Perú, por su ubicación estratégica, es un …
-
Regulace teploty topného tělesa termočlánkem
… pro výhřevný systém horkovzdušné pájky výkonu do 600W, s požadovaným nastavitelným teplotním rozsahem 150-500°C. Druhým úkolem je navrhnout toto zařízení s pokud možno nejjednodušším zapojením a nejmenším počtem součástek.
-
Konstruktion av 600 W 24/300 V dc/dc-omvandlare för batteriuppbackning
… av en DC/DC-omvandlare 24 till 300V, 600W. Omvandlaren har beställts av företaget DAAB för att integreras som en del av en batteriuppbackning till portstyrning. Som omvandlartopologi användes push-pull-omvandlare med strömreglering och styrkrets för systemet är TI:s ucc3806. En …
-
Development of a control system for gas concentration and temperature in an animal preference chamber
… in-line electrical resistance coils from 200W to 600W. The maximum temperature rise increased from 5.7±0.5°C to 15.1±0.6°C, with a time constant, τ, of 1.3±0.1 h. The 600W heating capacity achieved 95% of a 1°C and 3°C positive temperature step response in 12.3±2.3 min and 24.0±3.3 min, …
-
Design and Construction of 1800W Modular Multiple Input Single Output Non-isolated DC-DC Converters
… power. Each module in the MISO is rated at 600W and they share the output power equally. Hardware results show that the converter produces 1800W of output power from three sources with 96.4% efficiency. Each module also demonstrates equal sharing feature of the MISO converter.
-
Budiče spínacích výkonových tranzistorů GaN MOSFET
… byl navržen spínaný zdroj s výstupním výkonem 600W a velikou pracovní frekvencí 800kHz jako pokusný měřící obvod, který byl po zkonstruování oživen, a bylo na něm provedeno kontrolní měření. Zachycené průběhy pomocí osciloskopu jsou následně okomentovány. Závěrem práce je zhodnocení nabytých …
-
Gas assisted thin-film evaporation from confined spaces
… cooling mechanism demonstrates heat fluxes over 600W/cm2 for sufficiently thin membrane and film thicknesses (~1-5µm) and by using air jet impingement for advection of vapor from the membrane surface. Based on the results from this performance analysis, a monolithic micro-fluidic device is …
-
Method for an In-situ Diagnostic for Inner Pole Erosion of a Magnetically Shielded Hall Thruster
… the inner pole. An unwired sensor was exposed to 600W (300V, 2A) plasma conditions for two hours, resulting in 3 μm of erosion, calculated from manual resistance measurements. A fully integrated in-situ sensor was exposed to 225W (90V, 2.5A) conditions for one hour and experienced 3-5 μm of …
-
Design and control of resilient micro-inverter system
… of two inverters: a 300W micro-inverter and a 600W inverter simulated in PSIM. The Resiliency phase focused on the application of the designed inverters into four case studies for improving the resiliency of a PV system. It was found that placing an extra micro-inverter in parallel to the …
-
Důsledky zvyšování účinnosti malých motorů
… asynchronní motor firmy ATAS a.s. o výkonu 600W. K tomuto motoru byly vybrány tři opatření vedoucí ke zlepšení účinnosti, které se týkaly převážně úpravy průměru použitého vodiče vinutí, změny počtu závitů a případně prodloužení délky mg, obvodu. Těmto třem opatřením byla provedená hrubá …
-
Multiple Input, Single Output DC-DC Conversion Stage for DC House
… 2, 3, and 4 input sources providing greater than 600W of total output power at an efficiency of greater than 92%. This architecture demonstrates the possibility of expanding the total available power for a single output in proportion to the number of available input sources.
-
Laser Devices and Systems for Industrial and Biomedical Applications
… yielding to the all-fiber realization of a 600W single-mode Yb-doped FL module and 500W to 2000W low-brightness DDLs. First, different architectural solutions have been investigated and optimized, considering feasibility issues, energy consumption and overall ownership costs. Then, key fiber …
-
Design considerations for testing freeform PEM fuel cells
… test system had operational capabilities of 600W, 120 A, and 60 V, and could support gas flow rates up to 3 sLpm for hydrogen and 10 sLpm for air. The stack design space characteristic of the Nai numbers was bounded by 4.4cell·A and 197.1cell·A, as per the limitations of the test system. …
-
Enhancing Two-Phase Heat Spreading: Development and Performance Evaluation of Hermetically Sealed Hybrid Heat Sinks
… ℃/𝑊 with a hotspot temperature of 66.17℃ at 600W of dissipated heat. Integrating the dropwise condensation, via a nickelgraphene coating, lowered the hotspot temperature by 4.81◦C at the 0-degree orientation (25 gph), and, at the 180-degree orientation, a 13.42℃ difference (25gph), which was …
-
The Roles of Nitric Oxide, Oxidative Stress, and Angiotensin II Type 1 Receptor in Regulating Cutaneous Blood Flow and Sweating During Prolonged Exercise in the Heat with and without Fluid Replacement
… men completed 90-min of continuous cycling at ~600W of metabolic heat production followed by 40-min of recovery in the heat (40ºC). To evaluate the role of excess fluid loss via sweating, participants completed a second session of the same protocol while receiving fluid replacement (FR) …
-
Shallow Etch Recipe Design using DOE for Silicon Waveguides
… O2 (20sccm) and Ar (20sccm) gas flow rates) at 600W RF power and 16W platen power with pressure conditions same as shallow etch recipe for 17min. These runs are needed after every three shallow etch recipe runs to maintain the chamber conditions same. This shallow etch recipe can be used to make …
-
Microwave-assisted catalytic pyrolysis of refuse-derived fuel to improve pyrolysis performance and biochar properties
… m²/g) of biochar. Too low a microwave power (600W) could not initiate the reaction. The optimum targeted pyrolysis temperature was determined as 500 ℃ to produce biochar with the highest specific surface area (265 m²/g) and, based on statistical analysis, pyrolysis temperature was the main …
-
Development and Performance Assessment of Low Power Converters Using Wide Band-Gap Devices
… operational performance of a SiC MOSFET for a 600W non-isolated DC-DC boost converter at 2MHz is experimentally analysed, and the maximum achievable switching frequency with this gate driver is determined. The effects of switching speeds on electromagnetic interference (EMI) generation from …
-
MICROWAVE RADIATION CURING OF EPOXY/DIAMINE SYSTEMS
… curing were irradiated between 200W and 600W microwave power. The temperature-time profile showed that both microwave and thermally processed epoxy/amine samples followed three stages of cure reaction Microwave irradiated epoxy/amine samples consistently gave off significantly greater …
-
Ανακύκλωση μοριοσανίδων ινοσανίδων και πλαστικών στην ανάπτυξη και παραγωγή καινοτόμων, φιλικών προς το περιβάλλον βιοαποικοδομήσιμων σύνθετων υλικών ξύλου-πλαστικών
… close to the first, was the microwave heating at 600W for 3.5 min followed by ohmic heating at 9 A and 110. The cleaning method does not seem to have any statistically significant influence on the mechanical properties of the produced WPCs, which are very close to those of WPCs with untreated wood …
Page 1 of 2