Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 12 of 12 for “"6FDA-DAM"”.

  1. Synthesized polyimide membranes for pervaporation separations of toluene/iso-octane mixtures

    … and toluene/iso-ocatne mixtures. However, fundamental understanding of material structure and transport relations is not adequate to generalize guidelines for materials screening. The goals of this study are to tailor the structure of the polyimide materials, correlate the structure and …

    texas Repository record for Synthesized polyimide membranes for pervaporation separations of toluene/iso-octane mixtures (opens in a new tab)

  2. Zeolitic imidazolate framework (ZIF)-based membranes and sorbents for advanced olefin/paraffin separations

    … mixed-matrix dense film membranes with polyimide 6FDA-DAM at varied particle loadings and it was found that ZIF-8 significantly enhanced propylene/propane separation performance beyond the “permeability-selectivity” trade-off curve for polymeric materials. Eventually, this research advanced …

    gatech Repository record for Zeolitic imidazolate framework (ZIF)-based membranes and sorbents for advanced olefin/paraffin separations (opens in a new tab)

  3. SCALABLE FABRICATION OF MIXED-MATRIX MEMBRANES FOR GAS SEPARATIONS: POLYMER-MODIFICATION-ENABLED IN-SITU METAL-ORGANIC FRAMEWORK FORMATION

    … (ZIF-8) fillers up to 32.9 vol% in the 6FDA-DAM polymer. The binary C3H6/C3H8 separation performance of the MMMs showed much higher separation factors than conventionally-prepared 6FDA-DAM/ZIF-8 MMMs at similar filler loadings, satisfying the commercial C3H6/C3H8 separation performance …

    tamu Repository record for SCALABLE FABRICATION OF MIXED-MATRIX MEMBRANES FOR GAS SEPARATIONS: POLYMER-MODIFICATION-ENABLED IN-SITU METAL-ORGANIC FRAMEWORK FORMATION (opens in a new tab)

  4. Development and evaluation of nanocomposite membranes for proton conduction and gas separations

    … materials (the rubbery Pebax® MH1657 and glassy 6FDA-DAM), that are widely used in applications involving the removal of CO2 from gas mixtures, were combined with metal organic framework (MOF) particles. Pebax® MH1657 is a PA/PEO copolymer (PA/PEO = 40/60, where PA: polyamide and PE: …

    greece Repository record for Development and evaluation of nanocomposite membranes for proton conduction and gas separations (opens in a new tab)

  5. Development of next generation mixed matrix hollow fiber membranes for butane isomer separation

    … commercial application. A group of fluorinated (6FDA) polyimides, with high nC4 permeability and nC4/iC4 selectivity, are selected as the polymer matrix. No glassy polymers can possibly match the high permeable MFI to make mixed matrix membranes with selectivity enhancement for C4s separation. …

    gatech Repository record for Development of next generation mixed matrix hollow fiber membranes for butane isomer separation (opens in a new tab)

  6. Engineering nanoporous materials for application in gas separation membranes

    … untreated bare LTA. Surface modified zeolite 5A/6FDA-DAM mixed matrix membranes showed significant enhancement in CO₂ permeability with slight increases in CO₂/CH₄ selectivity as compared to the pure polymer membrane. The CO₂/CH₄ selectivity of the membrane containing surface treated zeolite 5A …

    gatech Repository record for Engineering nanoporous materials for application in gas separation membranes (opens in a new tab)

  7. Metal-organic framework (MOF) membranes for gas separations : a thesis presented in partial fulfilment of the requirements of the degree of Doctor of Philosophy in Chemistry at Massey University, Manawatu, New Zealand

    … within three different polymer matrices (Pebax, 6FDA-DAM and 6FDA-Durene), effectively minimizing non-selective voids around the particles. Importantly, MMMs incorporating nsMUF-16 consistently exhibit superior CO₂ separation performance compared to those utilizing micro-sized MUF-16. Overall, …

    massey Repository record for Metal-organic framework (MOF) membranes for gas separations : a thesis presented in partial fulfilment of the requirements of the degree of Doctor of Philosophy in Chemistry at Massey University, Manawatu, New Zealand (opens in a new tab)

  8. Carbon molecular sieve hollow fiber membranes for olefin/paraffin separations

    … due to the increased separation layer thickness, 6FDA-DAM and 6FDA/BPDA-DAM polyimides with higher rigidity were employed as alternative precursors, and significant improvement has been achieved. Besides the macroscopic morphology control of asymmetric hollow fibers, the micro-structure was tuned …

    gatech Repository record for Carbon molecular sieve hollow fiber membranes for olefin/paraffin separations (opens in a new tab)

  9. Carbon molecular sieve dense film membranes for ethylene/ethane separations

    … membranes. Three polymer precursors: Matrimid®, 6FDA-DAM and 6FDA:BPDA-DAM were used as precursors to the CMS membranes. CMS performances were tailored by way of tuning pyrolysis conditions such as the pyrolysis temperature, heating rate, pyrolysis atmosphere etc. The CMS dense film membranes …

    gatech Repository record for Carbon molecular sieve dense film membranes for ethylene/ethane separations (opens in a new tab)

  10. Membrane based separations of carbon dioxide and phenol under supercritical conditions

    … Investigation of the transport properties of 6FDA-based polyimide materials in the presence of pure carbon dioxide at high pressures showed interesting permeability trends, in which the permeabilities exhibited a maximum after which they declined with further increases in pressure. These …

    texas Repository record for Membrane based separations of carbon dioxide and phenol under supercritical conditions (opens in a new tab)

  11. Integrating Quantum-Chemical Calculations and Machine Learning Techniques in Advanced Environmental and Material Separation Studies

    … of (100) and (110) surface terminations with a 6FDA-DAM polymer matrix revealed distinct transport mechanisms. Density functional theory (DFT) and climbing-image nudged elastic band (CI-NEB) calculations identified 6-membered ring apertures as primary transport pathways and showed that polymer …

    ttu Repository record for Integrating Quantum-Chemical Calculations and Machine Learning Techniques in Advanced Environmental and Material Separation Studies (opens in a new tab) Embargoed until 2031-12-01

  12. Mixed matrix membranes for mixture gas separation of butane isomers

    … as the model vapors and a hybrid membrane of 6FDA-DAM-5A as an advanced separation system. To achieve the set goal, three objectives were laid out. The first objective was to determine the factors affecting separation performance in dense neat polymer. One main concern was plasticization. High …

    gatech Repository record for Mixed matrix membranes for mixture gas separation of butane isomers (opens in a new tab)