Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 11 of 11 for “"7YSZ"”.
-
Untersuchung des erosiven Verhaltens von Wärmedämmschichten nach CaO-MgO-Al2O3-SiO2 Infiltration
… Hintergrund wurden in dieser Arbeit EB-PVD 7YSZ TBCs mit zwei verschiedenen Mikrostrukturen sowie die CMAS-beständigere EB-PVD Gd2Zr2O7 TBC untersucht. Zusätzlich wurde auf EB-PVD 7YSZ TBCs mittels Suspensions-plasmaspritzen eine CMAS-beständige Al2O3-Schicht aufgebracht. Die …
-
Nondestructive Evaluation of Thermal Barrier Coating Systems Using Ultrasonic Techniques
… MCrA1Y and 7 wt % Yittra Stabilized Zirconia (7YSZ), received an early warning of delamination at the top coat/bond coat interface. The same traveling time and amplitude evolution were also observed on another three thermal barrier coated Rene N5 coupons subjected to isothermal exposure under …
-
Investigating the effect of CMAS Infiltration on Residual Stress of High Temperature Ceramic Coatings for Turbine Engines using 3D Confocal Raman Spectroscopy
… The residual stresses within infiltrated 7YSZ EB-PVD coatings were captured with microscale resolution. The results show an interplay between both the thermomechanical and thermochemical effects influencing the residual stress state of the coating. Thermomechanical mechanisms have a …
-
Χαρακτηρισμός τροποποιημένων ημιαγώγιμων υλικών με φυσικοχημικές μεθόδους
… the mixed oxides of 3YSZ (3% w/w Υ2Ο3/ZrO2) and 7YSZ (7% w/w Υ2Ο3/ZrO2) were prepared. The GO/3YSZ and GO/7YSZ composites were then synthesized using the reflux hydrothermal process. The new materials, characterized in terms of their particles’ size, by the techniques of FFF and DLS. These …
-
Suspension Plasma Spray Thermal Barrier Coating Systems - Modelling and Performance Characterization Under Isothermal and Cyclic Oxidation Conditions
… substrate, a NiCoCrAl bond coat, and finally a 7YSZ top coat with vertically cracked structure. During cyclic oxidation test, the TBC samples failed after 800 cycles, however, no evidence of failure was observed under isothermal condition for up to 1300 h. After the oxidation tests, …
-
Degradation of thermal barrier coatings on an Integrated Gasification Combined Cycle (IGCC) simulated film-cooled turbine vane pressure surface due to particulate fly ash deposition
… tolerance of the 7% yttria-stabilized zirconia (7YSZ) TBC coatings. The increase in the Young's modulus of the ceramic top coat is due to the stiffening of the YSZ columnar microstructure from the cooled particulate fly ash. SEM evaluation was used to evaluate the microstructure of the layers …
-
EXPERIMENTAL CHARACTERIZATION OF THERMAL BARRIER COATINGS USING MICRO-SCALE BENDING TECHNIQUES
… in compression. In summary, the modulus of EBPVD 7YSZ top coats has been measured and shown to depend on its unique columnar microstructure. The tension and compression asymmetry originates from the gaps between columns that result from the EBPVD process. The variation of the top coat modulus on …
-
Effects Of Bond Coat Surface Preparation On Thermal Cycling Lifetime And Failure Characteristics Of Thermal Barrier Coatings
… vapor deposition (EB-PVD) of ZrO2-7wt% Y2O3 (7YSZ) ceramic topcoat. The resulting characteristics of the bond coat and the thermally grown oxide (TGO) scale were initially documented by surface roughness, phase constituents of the TGO scale, and residual stress of the TGO scale. The thermal …
-
Thermo-mechanical degradation and mitigation by molten volcanic ash wetting on thermal barrier coatings of jet engine turbine blades
… consist of 7 wt% yttria-stabilized zirconia (YSZ/7YSZ) and are mainly produced by atmospheric plasma spray (APS) and electron beam-physical vapor deposition (EB-PVD). In the course of ever higher engine operation temperatures due to a continuous increase of aircraft engine efficiency, the coatings …
-
High Performance Thermal Barrier Coatings on Additively Manufactured Nickel Base Superalloy Substrates
… superalloys. The APS method is used to deposit 7YSZ as the topcoat and NiCrAlY as the bond coat on TruForm 718 substrates fabricated using the direct metal laser sintering (DMLS) method. For comparison, another TBC system with the same topcoat and bond coat is deposited using APS on wrought 718 …
-
In-Situ Investigations of Calcium-Magnesium-Aluminosilicates (CMAS) Infiltration Effects on Thermal Barrier Coatings Under Extreme Environments Replicating Jet Engines
Calcium-magnesium-aluminosilicate (CMAS) particulates, such as sand or volcanic ash, are ingested by gas turbine jet engines during operation. When operating within high abundance regions, these particulates negatively interact and degrade the high temperature thermal barrier coatings (TBC) …