Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 64 for “"7nm"”.

  1. Static random-access memory designs based on different FinFET at lower technology node (7nm)

    … cells using different types of FinFET devices at 7nm technology. From the analysis, it can be concluded that the performance of both 6T and 8T SRAM designs are improved. 6T SRAM achieves a 44.97% improvement in the read energy compared to 8T SRAM. However, 6T SRAM write energy degraded by 3.16% …

    umkc Repository record for Static random-access memory designs based on different FinFET at lower technology node (7nm) (opens in a new tab)

  2. Power, performance, and cost impact of gate-level monolithic 3D IC in the 7nm technology node

    The nature of device scaling in the 7nm era is changing from the traditional scheme driven by Moore’s law because of the physical and economic limitations of fabrication. Instead of reducing a horizontal distance between devices to increase the density of system functionalities, concerted efforts …

    gatech Repository record for Power, performance, and cost impact of gate-level monolithic 3D IC in the 7nm technology node (opens in a new tab)

  3. A Study of Carbon Infiltrated Carbon Nanotubes Fabricated on Convex Cylindrical Substrates for the Creation of a Coronary Stent

    … rod: a 80nm alumina diffusion barrier, 1.3 or 7nm of iron as a catalyst layer for CNT growth and a growth time of 1 or 15 min. Cracking is observed on most samples. Area fraction of cracking is shown to be minimized with 7nm of iron and and 1 min growth time. The number of cracks was minimized …

    byu Repository record for A Study of Carbon Infiltrated Carbon Nanotubes Fabricated on Convex Cylindrical Substrates for the Creation of a Coronary Stent (opens in a new tab) Download PDF for A Study of Carbon Infiltrated Carbon Nanotubes Fabricated on Convex Cylindrical Substrates for the Creation of a Coronary Stent (opens in a new tab)

  4. Challenges and solutions for large-scale integration of emerging technologies

    … CMOS for large-scale circuits designed at 7nm from MCNC benchmark suits. This research also presents a study on Crosstalk technology's scalability aspects and shows how the circuits' properties evolve from 180nm to 7nm technology nodes. Some significant results are for primitive Crosstalk …

    umkc Repository record for Challenges and solutions for large-scale integration of emerging technologies (opens in a new tab)

  5. Standard cell library design and optimization with CDM for deeply scaled FinFET devices

    … been developed in various selected technologies (7nm, 10nm, 14nm, 16nm & 20nm) and used to synthesize the ISCAS’85 benchmark designs to evaluate the performance improvement. Synopsys silicon smart and library compiler tool has been used to generate the standard cell libraries using FinFET device …

    ttu Repository record for Standard cell library design and optimization with CDM for deeply scaled FinFET devices (opens in a new tab)

  6. Vertically integrated end to end technology evaluation platform for CMOS and beyond CMOS

    … of scaling technology node from the 14nm node to 7nm node is presented for MRAM arrays while also evaluating the impact of various back-end-of-line (BEOL) technology options. In addition, at the 7nm node full SOT-MRAM memory system design is presented based on open-source ASAP7 process design kit …

    gatech Repository record for Vertically integrated end to end technology evaluation platform for CMOS and beyond CMOS (opens in a new tab)

  7. Design and prototyping of Hardware-Accelerated Locality-aware Memory Compression

    … As technology started advancing with 7nm products already in the market which can provide better power and performance consuming low area, the latency-critical functions that were handled by software traditionally now started moving as acceleration units in the chip. This thesis …

    vt Repository record for Design and prototyping of Hardware-Accelerated Locality-aware Memory Compression (opens in a new tab)

  8. Biosensor Development: Optimizing Immunomagnetic Separation of Bacteria

    … E. coli K-12. The optimization for the use of ~7nm Fe3O4 NPs for capture of bacteria has provided us with results that led to a conclusion for using 106:1 ratio of NP: E. coli cells, meanwhile minimally affecting cell viability. The same ratio provided us with maximum capture efficiency of more …

    jhu Repository record for Biosensor Development: Optimizing Immunomagnetic Separation of Bacteria (opens in a new tab)

  9. Dynamics of liquid-liquid displacement on nanorough surfaces

    … density and shape. Surface nanoroughness from 7nm rms influences the substrate static and dynamic wettability. Three phase contact line (TPCL) motion is thermally activated but the kinetics of liquid-liquid displacement are substantially slowed down by nanoroughness. Both solid-liquid …

    adelaide Repository record for Dynamics of liquid-liquid displacement on nanorough surfaces (opens in a new tab)

  10. DESIGN, MODELING, OPTIMIZATION, AND BENCHMARKING OF INTERCONNECTS AND SCALING TECHNOLOGIES AND THEIR CIRCUIT AND SYSTEM LEVEL IMPACT

    … charge-based devices implemented at the 7nm technology node and beyond. It examines the system-level performance of stacking device logic in addition to tunneling field effect transistors (TFET) and their potential as beyond-CMOS devices. Finally, this research models and benchmarks BEOL …

    gatech Repository record for DESIGN, MODELING, OPTIMIZATION, AND BENCHMARKING OF INTERCONNECTS AND SCALING TECHNOLOGIES AND THEIR CIRCUIT AND SYSTEM LEVEL IMPACT (opens in a new tab)

  11. Multi-Threshold Low Power-Delay Product Memory and Datapath Components Utilizing Advanced FinFET Technology Emphasizing the Reliability and Robustness

    … was also included, to assess the robustness. The 7nm FinFET device was then employed into 6T SRAM cells and 16 function ALU. The SRAM cells were approached with advanced multi-corner stability evaluation. The system-level architecture of the ALU has demonstrated an ultra-low power system operating …

    iupui Repository record for Multi-Threshold Low Power-Delay Product Memory and Datapath Components Utilizing Advanced FinFET Technology Emphasizing the Reliability and Robustness (opens in a new tab)

  12. Current Induced Depairing and Mixed State Behavior in the Bite/Fete Interfacial Superconductor

    … superconductivity forms in a thin 7nm interfacial layer between the two. The restricted dimensionality and the extraordinarily conductive normal state, possibly sourced by the topologically protected surface states, have led to the observation of novel phenomena such as the Likharev …

    south-carolina Repository record for Current Induced Depairing and Mixed State Behavior in the Bite/Fete Interfacial Superconductor (opens in a new tab)

  13. A Low Power FinFET Charge Pump For Energy Harvesting Applications

    … and Spectre Circuit Simulator tools using the 7nm FinFETs from the ASAP7 7nm PDK. The research conducted here takes advantage of some inherent characteristics that are present in FinFET technologies, including low body effects, and faster switching speeds, lower threshold voltage and lower …

    iupui Repository record for A Low Power FinFET Charge Pump For Energy Harvesting Applications (opens in a new tab)

  14. Mechanical Properties and MEMS Applications of Carbon-Infiltrated Carbon Nanotube Forests

    … infiltration time are examined. An iron layer of 7nm or 10nm with an infiltration time of 30 minutes produces CI-CNT best suited for compliant applications. Average maximum strains of 2% and 2.48% were observed for these parameters. The corresponding elastic moduli were 5.4 GPa and 4.1 GPa, …

    byu Repository record for Mechanical Properties and MEMS Applications of Carbon-Infiltrated Carbon Nanotube Forests (opens in a new tab) Download PDF for Mechanical Properties and MEMS Applications of Carbon-Infiltrated Carbon Nanotube Forests (opens in a new tab)

  15. Content Addressable Memories for In-Memory Search to Enable AI Applications

    … these challenges by analyzing CAMs at the 7nm technology node using layout extracted parasitics and considering various variability sources. We study these effects at the application-level using a CAM-based recommendation system. We suggest design modifications at the algorithmic, schematic …

    gatech Repository record for Content Addressable Memories for In-Memory Search to Enable AI Applications (opens in a new tab)

  16. Νανοσωματίδια ως δομικά στοιχεία ηλεκτρονικών διατάξεων

    … dioxide layer where Si-ncs could be achieved was 7nm. The best implantation conditions were 1keV energy and 21016Si+cm-2 implantation dose. Experimental studies on the optimization of the memory window and its retention time (10 years standard) revealed that these could be achieved by thermal …

    greece Repository record for Νανοσωματίδια ως δομικά στοιχεία ηλεκτρονικών διατάξεων (opens in a new tab)

  17. Towards No-Penalty Control Hazard Handling in RISC Architecture Microcontrollers

    … Further, we synthesized the proposed design with 7nm FinFET process and compared its latency with other designs to make sure that the microcontroller's operating frequency is not degraded by using this design. The critical path latency of instruction fetch stage integrated with the proposed …

    iupui Repository record for Towards No-Penalty Control Hazard Handling in RISC Architecture Microcontrollers (opens in a new tab)

  18. Single frequency vertical external cavity surface emitting lasers

    … which induces single frequency operation. A 7nm tuning range has been shown with maximum output of 19.4mW. Thermal modelling was undertaken to analyse how the removal of the VECSEL's substrate could increase the thermal efficiency for high power operation. Another small cavity design of …

    strathclyde Repository record for Single frequency vertical external cavity surface emitting lasers (opens in a new tab)

  19. Design of Low-Capacitance Electrostatic Discharge (ESD) Protection Devices in Advanced Silicon Technologies.

    … keep decreasing from 350nm bulk technology to 7nm FinFET technologies. In the meantime, parasitic capacitance of ESD diode with same It2 in FinFET technologies is approximately 3X compared with that in planar technologies. Thus transition from planar to FinFET technology requires more robust …

    ucf Repository record for Design of Low-Capacitance Electrostatic Discharge (ESD) Protection Devices in Advanced Silicon Technologies. (opens in a new tab)

  20. Multi-spectral confocal microendoscope for in-vivo imaging

    … resolvable wavelength difference varies from 7nm to 18nm over the same spectral range. Each of these characteristics are primarily dictated by the dispersive power of the prism. The MCME is designed to examine cellular structures during optical biopsy and to exploit the diagnostic information …

    arizona-thes Repository record for Multi-spectral confocal microendoscope for in-vivo imaging (opens in a new tab)

Page 1 of 4