Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"AA3003"”.
-
Annealing behaviour of cold deformed AA3003 aluminum alloys
… As such, annealing behaviour of cold deformed AA3003 based alloys after extrusion was investigated in this work. Experimental work was conducted on two alloys homogenized prior to extrusion: 3003 (0.54 wt% Fe) and low Fe 3003 (0.09 wt% Fe). A variety of homogenization heat treatments were …
-
Effect of high temperature extrusion conditions on the microstructure of AA3003 aluminum alloy
… extrusion conditions on the microstructure of AA3003 aluminum alloys has been investigated. The extrusion trials were conducted using a laboratory scale fully instrumented extrusion press at Rio Tinto Alcan’s Arvida Research and Development Centre (ARDC). Direct Chill (DC) cast billets were …
-
Mechanistic Studies of Interface Formation Between AA3003 and AA4045 Alloys During Fusion™ Casting
… were employed to examine the Fusion™ casting of AA3003-core/AA4045-clad ingots. Tests were conducted using an analog/immersion test system designed and built at the University of Waterloo. The immersion tests provided a means to examine wetting and bonding between dissimilar aluminum alloys under …
-
Investigation of effect of temperature and forming speed on the formability of AA3003 Brazing Sheets
… and forming speed on the formability of AA3003 aluminum alloy brazing sheet in three temper conditions (O, H22 and H24) and two different thicknesses (0.2 and 0.5 mm). Limiting Dome Height (LDH) experiments were conducted from which Forming Limit Curves (FLCs) were developed using the …
-
Mathematical Modelling of the Material Flow and Microstructural Evolution During the Extrusion of AA3003 Aluminum Alloy
… evolution that occurs in aluminum alloy AA3003 during extrusion. The plasticity module was developed using a commercial finite element package, DEFORM, a transient Lagrangian model which couples the thermal and deformation phenomena and is able to predict the temperature, strain rate and …
-
A study on the texture and microstructure development in extruded AA3003 alloys and the relevant mechanical behaviour
In this study, a model alloy (i.e. AA3003) was used to examine microstructure and texture development in the extrusions and the relevant mechanical response. In particular, two homogenization heat treatments were studied as the initial condition, i.e. at 375 °C for 24 h, which produces a high …
-
Direct Chill Casting of Aluminum Alloys: Experimental Methods and Design
… Global Technology Centre in Kingston, Ontario. AA3003, AA6111, and AA4045 aluminum alloys were chosen for this study since these aluminum alloys are commonly used in clad products. Two series of experiments were performed to investigate the effect of casting parameters on the solidification and …
-
Effect of homogenization on high temperature deformation behaviour of AA3xxx aluminum alloys
… Mn), an intermediate Mn alloy (0.75 wt% Mn), and AA3003 (1.27 wt% Mn). Homogenization treatments were conducted at soak temperatures from 500 to 630°C and times of 1 to 24 hours. The evolution of microstructure during homogenization (at 600°C over a soak time of 24 hours) was characterized using …
-
Novel processing routes for the use of post-consumer aluminum scrap
… was comprised of a majority of either AA6111 or AA3003, so these commercial alloys were also cast to serve as baseline comparisons. The alloys were thermomechanically processed via homogenization heat treatments (1 hour at 560/600°C), hot and cold rolling, quenching, and solution treatments (10 …
-
Microstructure evolution during extrusion of AA3xxx aluminum alloys
… microstructural evolution of aluminum alloys AA3003 (1.27wt% Mn) and AA3102 (0.26wt% Mn) during high temperature extrusion was investigated. The Direct Chill(DC) cast microstructure of both alloys showed interdendritic eutectic regions consisting of rod/plate like constituent particles in the …
-
Effect of Elevated Temperature on Mechanical Behaviour and Springback of Aluminum Alloy Brazing Sheets
… warm forming process parameters on springback of AA3003 brazing sheets, comprising a modified AA3003 core with a lower melting point AA4045 clad layer used to promote brazing. Three temper conditions were considered including O-, H22- and H24-temper. Two custom tooling sets were designed to form …
-
Dynamic loading characteristics in metals and composites
… the mechanical characteriztics of aluminum alloy AA3003-H14 when it is subjected to dynamical axial loads at low strain rates of less than 1s-1. The tensile experiments show that both the ultimate and yield stresses as well as the absorbed strain energy, increase with strain rate. Moreover, the …
-
Experimental study of applying grooves on semi-tubular blank sheet metal using incremental sheet forming.
… They were produced experimentally out of AA3003-H14. The results from executing various toolpaths strategies were discussed. This research introduced to the ISF field deforming non-planar material, using higher strength alloys, forming previously strained material, and applying multiple …
-
Formability of Aluminum Alloy Sheet at Elevated Temperature
… and non-isothermal warm formability of an AA3003 aluminum alloy brazing sheet is presented. Forming limit diagrams were determined using warm limiting dome height (LDH) experiments with in situ strain measurement based on digital image correlation (DIC) techniques. Forming limit curves …
-
Direct Chill and Fusion Casting of Aluminum Alloys
… bar. For the Fusion casting experiments the AA3003-Core/AA4045-Clad alloy system was chosen since this alloy system has already been commercially produced using this novel technology. In addition to embedded thermocouples in the Fusion cast ingot, and other temperature measurements as for the …
-
Static Recovery Modeling of Dislocation Density in a Cold Rolled Clad Aluminum Alloy
… FusionTM alloy containing an AA6XXX core with an AA3003 cladding on one side. The bond between alloys appears microscopically discrete and continuous, but has a 30 m wide chemical gradient. The as-deformed structure at the interalloy region consists of pancaked sub-grains with dislocations at the …
-
Strain evolution during hot tearing in aluminium alloys
… wt pct Cu under slow cooling conditions and AA3003 under directional solidification using a water cooled copper chill. A new hot tearing experiment has been developed which localises strain to promote hot tearing to occur in only one region of the casting and is cooled by directional …
-
Static Recovery of a Clad Aluminum Alloy After Cold Rolling
… of a core AA6XXX alloy clad on one side with AA3003. The Recovery at the inter-alloy region is compared with the recovery of core AA6XXX at the same depth from the rolling surface. Sample coupons from the inter-alloy region and core AA6XXX were heated isochronally and isothermally, at …
-
A Component-Level Study on the Effect of Warm Forming on Formability and Springback of Aluminum Alloy Brazing Sheet
… on the formability and springback behavior of AA3003/AA4045 brazing sheet (0.2 mm gauge) for three temper conditions: O-, H22- and H24-tempers. The geometry under study is referred as a surrogate heat-exchanger component (SHC) and contains complex features found on commercial automotive thermal …
-
F-TEMPER VS O-TEMPER BRAZING OF 3003 ALUMINUM RETURN BENDS
As-extruded (F-temper) 3003 return bends can provide cost savings over annealed (O-temper) return bends in aluminum heat exchangers. To assess if F-temper return bends are an alternative to the baseline O-temper bends, the grain structure, bending performance, and melting behavior were assessed …
Page 1 of 2