Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 6 of 6 for “"AA4045"”.
-
Mechanistic Studies of Interface Formation Between AA3003 and AA4045 Alloys During Fusion™ Casting
… to examine the Fusion™ casting of AA3003-core/AA4045-clad ingots. Tests were conducted using an analog/immersion test system designed and built at the University of Waterloo. The immersion tests provided a means to examine wetting and bonding between dissimilar aluminum alloys under closely …
-
Direct Chill and Fusion Casting of Aluminum Alloys
… both traditional DC (for AA6111, AA3004 and AA4045) and novel Fusion (AA3004/AA4045) casting experiments. First the series of DC casting experiments was performed. During the experiments two arrays of 5 thermocouples were embedded in the ingot during the cast to capture the thermal history of …
-
Direct Chill Casting of Aluminum Alloys: Experimental Methods and Design
… Centre in Kingston, Ontario. AA3003, AA6111, and AA4045 aluminum alloys were chosen for this study since these aluminum alloys are commonly used in clad products. Two series of experiments were performed to investigate the effect of casting parameters on the solidification and cooling of the …
-
Effect of Elevated Temperature on Mechanical Behaviour and Springback of Aluminum Alloy Brazing Sheets
… modified AA3003 core with a lower melting point AA4045 clad layer used to promote brazing. Three temper conditions were considered including O-, H22- and H24-temper. Two custom tooling sets were designed to form U-shaped channels, allowing forming temperature, blank holding force and lubricant …
-
A Component-Level Study on the Effect of Warm Forming on Formability and Springback of Aluminum Alloy Brazing Sheet
… formability and springback behavior of AA3003/AA4045 brazing sheet (0.2 mm gauge) for three temper conditions: O-, H22- and H24-tempers. The geometry under study is referred as a surrogate heat-exchanger component (SHC) and contains complex features found on commercial automotive thermal …
-
Effect of Forming Temperature and Sheet Temper on the Brazing Characteristics of Aluminum Alloy Sheet
… an overall thickness of 200 µm, and a single AA4045 clad layer comprising 10 % of the sheet thickness. The sheets were supplied in both the fully annealed (O) and the work hardened (H24) sheet tempers. Warm forming was initially simulated by performing interrupted tensile tests between room …