Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1537 for “"ABAQUS"”.
-
Abaqus Based Modelling of Ball Bearings
… ball bearings can be accurately modeled in Abaqus by replacing rolling elements with non-linear springs. The main focus is on the transfer of radial, axial, and combined loads. Existing analytical stiffness models, such as those by Harris and Hamrock, were found inadequate for general use, …
-
Využití škálování hmotnosti explicitního řešiče systému Abaqus
… škálovania hmotnosti vo výpočtovom prostredí Abaqus. Úvodná, rešeršná časť práce začína stručnou charakterizáciou metódy konečných prvkov a najmä jej explicitnej formulácie, po ktorej nasleduje definícia jednotlivých spôsobov škálovania hmotnosti a popis ich použiteľnosti. Praktická časť práce …
-
Modeling and Analysis of Prototype Shelter Structure on Abaqus
… computer simulation of the shelter structure on Abaqus/CAE 2019. The results of the computer modelling demonstrate the response of shelter structure under ten different loading conditions as per ISO 1496:2013 (E). The loading conditions are applied to various components of the shelter structure …
-
Implementation of a Material Model for Adhesives in Abaqus
… as a user material model in the FE-solver Abaqus, which is the preferred solver for Δα-simulations at Volvo Cars. The Abaqus implementation was evaluated against both the existing implementation in LS-DYNA and a physical test. In the evaluation, the results from Abaqus were within the …
-
Developing a Vehicle Hydroplaning Simulation using Abaqus and CarSim
… (FSI) between the tire-water-road surfaces. Abaqus FSI CEL approach has been used to study tire traction with various vehicle configurations. The tire force data obtained from the Finite Element simulations is used to develop a full vehicle hydroplaning model by integrating the relevant …
-
ABAQUS simulation and optimization of PMMA hot embossing process
Increasing demand for microstructure replication in the industry has led to increasing attention to hot embossing technology. The hot embossing technology has developed a lot for the past few decades and been proved to be capable to replicate microstructure with high efficiency and high accuracy. …
-
Modelling Masonry as a Continuum: Finite Element Analysis using ABAQUS
The preservation of masonry structures, deeply intertwined with human history and culture, poses significant engineering challenges. Engineers work to ensure the safety and longevity of these structures through meticulous analysis of their structural integrity. However, conventional elastic …
-
Finite Element Analysis of Carbon Fiber Composite Ripping Using ABAQUS
… This thesis will examine the mechanism using ABAQUS to create an accurate model of the material behavior to aid in the design and fine tuning of the ripped assembly before prototyping. This is important because it not only decreases design costs but also the time to market release for the …
-
Výpočtové modelování s využitím metod přesíťování v MKP programu Abaqus
… přesíťování, které jsou dostupné v programu Abaqus. Jedná se o adaptivní přesíťování, mapování řešení a ALE adaptivní síťování. Vybrané metody jsou ukázány na několika úlohách. Výsledky jsou porovnány s analytickým řešením a s řešením bez využití metod přesíťování.
-
Finite element modeling of the filament winding process using ABAQUS
… program, WACSAFE, was implemented using the ABAQUS finite element software package. This new implementation, referred to as the ABWACSAFE procedure, consists of the ABAQUS software and a pre/postprocessing routine that was developed to prepare necessary ABAQUS input files and process ABAQUS …
-
A Parametric Study of Lateral-Torsional Buckling in Pultruded FRP Beams Using Abaqus
… modeled with general purpose shell element in ABAQUS to account for the shear deformation in the transverse direction and the lateral shear deformation in the flanges. Python scripts were developed to automate the modeling of wide flange, channel, and narrow rectangular beams of arbitrary …
-
Two Dimensional Finite Element Modeling of Swift Delta Soil Nail Wall by "ABAQUS"
… of the piling? A general purpose FE code called ABAQUS was used to perform both linear and non-linear analyses. The analyses showed that the piling definitely underwent some stress changes. In addition they also indicated that piling influence resulted in lower nail stresses. Comparison of …
-
Implementation of the extended finite element method (XFEM) in the Abaqus software package
… the eXtended Finite Element Method (XFEM) in the Abaqus software package. A user-defined element was developed containing the analytical functions relating to homogeneous and interface fracture mechanics. The long-term goal of such work is to increase the ability to analyze fractures and other …
Page 1 of 77