Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 92 for “"AC impedance"”.
-
Analysis of Electrode Geometric Parameters on AC Impedance Response
Electrochemical Impedance Spectroscopy (EIS) is a powerful and proven tool for analyzing AC impedance response. A conventional three electrode EIS method was used to perform the investigation in the present study. Saturated potassium chloride solution was used as the electrolyte, and three …
-
The Characterization of Lubricating Fluids Using AC Impedance Spectroscopy
Impedance Spectroscopy has been used to study the interrelationships that exist between lubricating fluids having different additives, and the bulk and interfacial properties of fluid/metal systems. Here, electrical equivalent circuit modeling was used to represent the resulting physiochemical …
-
The Evaluation of Solder Paste Characteristics Using AC Impedance Spectroscopy
The monitoring of solder paste characteristics during surface mount circuit assembly procedures is ultimately concerned with obtaining a high yield of reliable solder joints. The process control of solder paste systems under manufacturing conditions is, at present, not derived from on-line …
-
A novel high-speed AC impedance method for monitoring transient cavitation
… dynamics using a set of novel electrochemical impedance measurements with the ability to monitor the motion of bubbles during cavitation. This method was able to report dynamic information about the motion of bubbles over an electrode surface with a time resolution of 2 μs. The results produced …
-
AC IMPEDANCE AND TRANSIENT PHOTOELECTROCHEMICAL MEASUREMENTS ON PHTHALOCYANINE-MODIFIED ELECTRODES (ELECTROCHEMISTRY).
This dissertation describes photocoulometric and AC impedance studies of dye-modified electrodes. The photocoulometric technique allowed photoelectrochemical phenomena to be observed without mass transport effects. These measurements confirmed the photoconductive properties of monomeric silicon …
-
Electrode-Electrolyte Interface Characterization of Platinum on 8 Mole% Yttria Stabilized Zirconia by AC Impedance Spectroscopy
… present at the electrode / electrolyte interface of platinum on 8 mole% Yttria Stabilized Zirconia with a three electrode AC Impedance measurement technique. In determining the polarization processes it is intended that the rate limiting mechanism be determined so that future improvements …
-
An AC impedance spectroscopy study of the freezing-thawing durability of Wollastonite micro-fibre reinforced cement paste.
The AC impedance spectroscopy (ACIS) is an electrochemical technique used to characterize materials in various research fields owing to its non-destructive nature. The ACIS, accordingly, appears to have a potential as a non-destructive technique to investigate the durability of cement paste. An …
-
Development of an advanced DC-polarisation/AC-impedance cyclic test to evaluate the corrosion of electrically-conductive coating/substrate systems
In this work, an advanced (AC)DC/OCP/AC cyclic test regime has been developed (and validated experimentally) as a new tool for the evaluation of the corrosion behaviour of metallic substrates and/or electrically-conductive coatings. Incorporation of concurrent solution pH measurement with the …
-
A STUDY OF THE LITHIUM IONIC CONDUCTOR Li<sub>5</sub>La<sub>3</sub>Ta<sub>2</sub>O<sub>12</sub>: FROM SYNTHESIS THROUGH MATERIALS AND TRANSPORT CHARACTERIZATION
… effects and the electrode-electrolyte interface. To characterize the material, traditional AC impedance spectroscopy studies were performed as well novel in-situ nanoscale transport measurements. To perform the nanoscale measurements, higher quality samples were required and new synthesis …
-
Battery Impedance Measurement Using Sinusoidal Ripple Current Emulator
Battery impedance measurements are directly correlated with the internal thermal rise and lifetime of rechargeable Li-ion batteries. The ac impedance measurement is not only reflects the battery state of health, but also a crucial parameter for a charging control strategy to reduce the internal …
-
Power Electronics- based Photovoltaics Panel Fault Detection using Online Impedance Measurement Technique
… systems. PV researchers today explore factors such as reducing utility energy bills and CO2 emissions, grid voltage stability, peak demand shaving, supply of electric power off-grid areas, and many more. The technology discussed is easy to incorporate, requires no additional hardware, …
-
Synthesis and Characterization of Polymer Composite Materials For Lithium Battery Cathodes and Capacitors
The dissertation discusses the synthesis and characterization of polymer composite materials used in lithium primary batteries and capacitors. The objective of the first part of the dissertation is to develop cathode materials based on silver vanadium oxide (SVO) coated with polypyrrole (PPy) …
-
Design and Evaluation of a Photovoltaic Inverter with Grid-Tracking and Grid-Forming Controls
… applies the concept of a virtual-synchronous-machine- (VSM-) based control to a conventional 250-kW utility-scale photovoltaic (PV) inverter. VSM is a recently-developed control scheme which offers an alternative grid-synchronization method to the conventional grid-tracking control scheme, …
-
High Temperature Co-electrolysis of Carbon dioxide and Steam in a Solid Oxide Cell for Synthesis Gas Production
… further understanding of the co-electrolysis reaction mechanism is one of three key areas of development. In this work, a co-electrolysis test facility was designed, developed and commissioned. Additionally, the performance of a NextCellTM electrolyte supported cell was investigated for CO2 …
-
Transient and steady state electrochemical studies of transport dynamics and equilibria in thin polymer films containing redox centers
… (QPVP) modified electrodes in contact with potassium nitrate (KNO$\sb3$) solution. The goal was to intercompare the electron diffusion coefficient (D$\sb{\rm E}$) of the system obtained by transient and steady state electrochemical methods and to evaluate the effect of equilibrium …
-
Electrical Characterization of Flux/Substrate Interface
… of the flux in a solder paste and the surface condition of the substrate of a printed circuit board. A means of monitoring solderability has been developed using both AC and DC electrical techniques. A physical model of solder paste has been developed from the results obtained from AC …
-
The Study of the Electrical Properties of a Single Grain Boundary in Metal Oxide Varistors
Small signal AC and DC responses of a single grain boundary in commercial low voltage Metal Oxide Varistor materials were examined. Two electron traps at the depth 0.16 eV and 0.33 eV below the conduction band edge were characterized using Lump Parameter/Complex Plane Analysis. The origin of these …
-
Single ion conductors based on polymer-modified nanoparticles : synthesis and characterization
… of the anions were largely restricted by surface anchored polymer backbones, lithium ion became the only ion that is conducting current. Four different polymer structures were explored in this study, aiming at improving conductivity of the material. FTIR and TGA were used to prove successful …
-
Co-ordination of converter controls and an analysis of converter operating limits in VSC-HVdc grids
… limitations imposed on a VSC-HVdc converter by ac system strength and ac system impedance characteristics, quantified by the short circuit ratio (SCR). An important result of this study is that the operation of the converter is not only affected by the SCR’s magnitude, but is also significantly …
Page 1 of 5