Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 144 for “"AERATED CONCRETE"”.

  1. Design provisions for autoclaved aerated concrete (AAC) structural systems

    The objective of this research program was to develop reliable design provisions for AAC structural systems. Typical AAC construction uses AAC shear walls combined with AAC floor or roof diaphragms. AAC shear walls are the predominant structural application of AAC. Because the behavior of AAC shear …

    texas Repository record for Design provisions for autoclaved aerated concrete (AAC) structural systems (opens in a new tab) Restricted access

  2. Design provisions for autoclaved aerated concrete (AAC) infilled steel moment frames

    … frames infilled with conventional (clay or concrete) masonry. The ATC-63 methodology, specialized for application to infilled frames, is applied to the archetypical infilled frames developed above. The performance of those archetypical infilled frames is evaluated, and seismic design factors …

    texas Repository record for Design provisions for autoclaved aerated concrete (AAC) infilled steel moment frames (opens in a new tab)

  3. Autoclaved aerated concrete : shaping the evolution of residential construction in the United States.

    Precast Autoclaved Aerated Concrete (AAC) is a proven construction material used successfully in Europe for over 70 years. Introduced to the United States construction market in 1990, construction thus far has been limited to commercial and high end custom home applications. The world leading …

    nps Repository record for Autoclaved aerated concrete : shaping the evolution of residential construction in the United States. (opens in a new tab)

  4. Evaluation of the shear design provisions of ACI 523.4R for autoclaved aerated concrete members

    Autoclaved aerated concrete (AAC) is a lightweight cellular building material. In Spring 2008, an experimental study was conducted at The University of Texas at Austin to evaluate the load-deflection behavior and capacity of six different factory-reinforced AAC lintel groups. The results the test …

    texas Repository record for Evaluation of the shear design provisions of ACI 523.4R for autoclaved aerated concrete members (opens in a new tab)

  5. Autoclaved aerated concrete (AAC) masonry : lap-splice provisions and nominal capacity for interface shear transfer between grout and AAC

    Design of autoclaved aerated concrete (AAC) masonry in the United States is currently based on Appendix A of the 2008 Masonry Standards Joint Committee (MSJC) Code. Those provisions include the design of lap splices, and equations for the nominal capacity in interface shear transfer between grout …

    texas Repository record for Autoclaved aerated concrete (AAC) masonry : lap-splice provisions and nominal capacity for interface shear transfer between grout and AAC (opens in a new tab)

  6. SOUND TRANSMISSION LOSS OF PARTY WALLS AMONG PRIVATE RESIDENTIAL BUILDINGS IN SINGAPORE

    … in residential developments. Some reinforced concrete party walls are used for tall buildings exceeding 16 floors. At present aerated concrete is rarely used for party walls construction for residential buildings in Singapore. b. The mean Field Sound Transmission Class (FSTC) of full brick …

    nus Repository record for SOUND TRANSMISSION LOSS OF PARTY WALLS AMONG PRIVATE RESIDENTIAL BUILDINGS IN SINGAPORE (opens in a new tab) Download file for SOUND TRANSMISSION LOSS OF PARTY WALLS AMONG PRIVATE RESIDENTIAL BUILDINGS IN SINGAPORE (opens in a new tab)

  7. Incinerated ashes: characteristics and potential for use in concrete-related applications

    … ash and sewage sludge ash, and their use in concrete related applications, an original analytical systemisation method was developed. This involved sourcing of the global data, which were systematically coordinated into a collective form, for the analysis, evaluation and modelling work to be …

    birmingham Download PDF for Incinerated ashes: characteristics and potential for use in concrete-related applications (opens in a new tab)

  8. Sustainable building materials and systems

    … thickness comprised an 80 mm thick indigenous aerated concrete core and two 10 mm thick indigenous ferrocement skins with jute fabric reinforcement. The in-plane shear (diagonal compression) test components were 500 mm square with thickness and cross-sectional designs similar to those of …

    msu Repository record for Sustainable building materials and systems (opens in a new tab)

  9. Moisture transport across interfaces between building materials

    … between two materials, i.e. autoclaved aerated concrete (AAC) and mortar. All experimental results conclusively show that an assumption of perfect hydraulic contact is an over simplification of the interfacial phenomena. Instead, this thesis recommends "imperfect hydraulic contacts" in …

    concordia Download PDF for Moisture transport across interfaces between building materials (opens in a new tab)

  10. STUDY OF HEAT TRANSFER OF BIPV AND ITS EFFECT ON ETTV

    … measurement set up by SERIS, specimen autoclaved aerated concrete block wall is installed with different cladding panels, insulated and uninsulated, and photovoltaics panels. Temperature measurements were carried out at the different elements of the setup such as surfaces of the block wall and …

    nus Repository record for STUDY OF HEAT TRANSFER OF BIPV AND ITS EFFECT ON ETTV (opens in a new tab)

  11. Recovery and valuation of ultrafine marble dust contained in waste slurries deriving from carbonatic natural stones processing plants

    … demonstrate the feasibility of these uses (concrete production; brick making; plaster industry; autoclaved aerated concrete manufacturing). Economic evaluation is also considered. …

    cagliari Repository record for Recovery and valuation of ultrafine marble dust contained in waste slurries deriving from carbonatic natural stones processing plants (opens in a new tab)

  12. The Development of Novel Infill Materials for Composite Structural Assemblies

    … mix compositions of foam and ultra-lightweight concrete as well as numerical simulation using finite element analysis in order to describe and predict bonding strength between steel sheets and aerated concrete specimens are presented in the thesis. A significant achievement of the research was …

    auckland-tech Repository record for The Development of Novel Infill Materials for Composite Structural Assemblies (opens in a new tab)

  13. The Effect of Fibers on the Physical Properties, Serviceability, and Ultimate Load Capacity of Cellular Concrete Beams

    Lightweight concrete is a concrete which by one means or another has been made lighter than conventional concrete. This means, that the most obvious characteristic of lightweight concrete is its density which is always less than that of normal weight concrete. Basically, there is one means of …

    sdstate Repository record for The Effect of Fibers on the Physical Properties, Serviceability, and Ultimate Load Capacity of Cellular Concrete Beams (opens in a new tab)

  14. Water Penetration in Solid Clay Brick Masonry and its Mitigation by Repointing

    … and reduce the moisture content of autoclaved aerated concrete (AAC) walls. The positive effects of repointing are particularly pronounced when the brick veneer exhibits signs of poor workmanship or visible cracks, especially when walls are exposed to high WDR loads.

    lund Repository record for Water Penetration in Solid Clay Brick Masonry and its Mitigation by Repointing (opens in a new tab) Download PDF for Water Penetration in Solid Clay Brick Masonry and its Mitigation by Repointing (opens in a new tab)

  15. Machinability of Aerospace Tooling Materials for Composite Repairs

    … were selected, namely: (AAC) Autoclaved Aerated Concrete, CB1100 ceramic block and Cfoam carbon foam. Machining tests were conducted in order to evaluate the machinability of these materials using end milling. Chip formation, cutting forces, cutting tool wear, machining induced damage, …

    washington Repository record for Machinability of Aerospace Tooling Materials for Composite Repairs (opens in a new tab)

  16. Passive House Envelope Retrofit for Heritage Buildings in Hot Semi-Arid Climates: A Shoebox Energy Simulation Study of the Former British Residency (Osmania University College for Women), Hyderabad, India

    … used locally made materials: autoclaved aerated concrete (AAC) blocks, mud, and mineral wool. For a fourth scenario, 150mm of expanded polystyrene on interior walls, reflective roof coating, and triple glazing were used. The baseline provides 227.1 kWh/m²/year of cooling energy and a peak …

    rit Repository record for Passive House Envelope Retrofit for Heritage Buildings in Hot Semi-Arid Climates: A Shoebox Energy Simulation Study of the Former British Residency (Osmania University College for Women), Hyderabad, India (opens in a new tab)

  17. Validation of hygrothermal material modelling under consideration of the hysteresis of moisture storage

    … four building materials brick, lime-sand brick, aerated concrete and calcium silicate. The adjusted material functions are shown and discussed. In all four cases, the calibration provides an excellent agreement between measured and calculated material behaviour. As experimental basis of the …

    qucosa-diss

Page 1 of 8