Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 69 for “"AFM probe"”.
-
Nano Mechanical Machining Using AFM Probe
… techniques. An atomic force microscope (AFM) probe based nano fabrication, has, therefore, been used to overcome some the major restrictions of the traditional processes. This technique removes material from the workpiece by engaging micro/nano size cutting tool (i.e. AFM probe) and is …
-
MANUFACTURING PROCESS OF NANOFLUIDICS USING AFM PROBE
… using a nano tip in indentation mode on AFM (Atomic Force Microscopy). The nano channels are integrated between the micro channels and act as a filter to separate biomolecules. Nano channels of 4 to7 m in length, 80nm in width, and at varying depths from 100nm to 850 nm allow the …
-
Microfabrication of a high sensitivity fluidic AFM probe
… presents significant advancements in AFM probe fabrication technologies toward an AFM based assay that combines a spectrum of AFM capabilities into a comprehensive multimodal single cell analysis. The objective of this work is the fabrication of the world’s softest hollow cantilever …
-
Vibration Assisted AFM-Probe Based Nano-Mechanical Machining of Nanocomposites
In this study, an AFM-probe based nano-mechanical machining technique is studied to fabricate nano-metric features in the accurate and efficient manner. It uses a retrofitted AFM system with a single crystal diamond probe, whereas external vibration is applied to improve the efficiency and quality …
-
Design and optimization of an AFM probe based on piezoresistance effect
Atomic Force Microscopy (AFM) probes with embedded stress sensors have demonstrated the ability to address key issues such as simplicity, reliability, and responsiveness to parallel scanning techniques and therefore are promising devices for AFM applications. Even though there are some other …
-
GAN NANOWIRE LASER FOR A UNIVERSAL ATOMIC FORCE MICROSCOPE PROBE: A COMPUTATIONAL AND FEASIBILITY STUDY
… for integrating a GaN nanowire into an AFM probe resulting in a universal atomic force microscope probe. Previous studies have shown GaN nanowires have stable mechanical properties, can be fabricated at scale with high aspect ratios and very smooth side walls, and have intrinsic lasing …
-
Fabrication of Hybrid Atomic Force Microscopy Probe for Enhancing Sensitivity of AFM-Infrared Nanoscale Spectroscopy
Atomic force microscopy infrared-spectroscopy (AFM-IR) has emerged as a novel method that combines nanoscale resolution of AFM with IR-spectroscopy. In this technique heat generated by IR absorption within the sample will induce thermal expansion, which is detected by AFM probe, in contact with the …
-
Application of an Inverse-Hysteresis Iterative Control Algorithm for AFM Fabrication
… substrate using an atomic force microscope (AFM). The AFM is an important instrument in micro/nanotechnology because of its ability to interrogate, manipulate, and fabricate objects at the micro/nanoscale. The AFM uses a piezoelectric actuator to position an AFM-probe tip relative to the …
-
Nanofabrication of direct positioning atomic force microscope (AFM) probes and a novel method to attain controllable lift-off
… in the area related to atomic force microscope (AFM) probes and a novel way of constructing the bi-layer system for liftoff. The contribution of this thesis is therefore the introduction and characterization of nanotechnologies and their applications in fabricating the AFM probes (Part 1). …
-
Investigation into the onset of nanoscale surface damage of biomedical grade CoCrMo: influence of contact loads, residual stresses, and environment
… to the sample while the atomic force microscope (AFM) probe applies well characterized normal and shear loads across the surface. This would be analogous to a wear particle (the AFM probe) coming into contact with the implant, a failure mode commonly associated with total hip and knee prostheses. …
-
Atomic-Scale Friction Mechanisms of Two-Dimensional Materials in the Non-Polar Solvents
… using well-defined atomic force microscopy (AFM) probe sliding against the 2D material. The atomic-scale friction of graphene supported on silica as a function of immersion time in hexadecane showed diffusion and intercalation of hexadecane at the graphene-silica confinement resulting in a …
-
Scanning Probe Alloying Nanolithography (SPAN)
… The new technique is called the Scanning Probe Alloying Nanolithography (SPAN). The SPAN was processed using an Atomic Force Microscope (AFM) in ambient environment. Firstly, an AFM probe was coated with gold (Au), and then slid on a silicon (Si) substrate. The contact-sliding motion …
-
Dynamic Measurements with Scanning Probe Microscopy: Surface Studies Using Nanostructured Test Platforms of Metalloporphyrins, Nanoparticles and Amyloid Fibrils
… been developed, using atomic force microscopy (AFM) combined with electromagnetic sample actuation. Instead of using a coated AFM probe as a magnetic sensor; our strategy is to use a nonmagnetic probe with contact mode AFM to characterize the vibration of magnetic and superparamagnetic …
-
Towards closed-loop nanopatterning: quantifying ink dynamics in dip-pen nanolithography
Dip-pen nanolithography (DPN) is a scanning probe microscopy-based nanofabrication method that relies on a fluid-coated atomic force microscope probe for the deposition of material on a substrate with nanometer-scale resolution. The ability to tailor the structure and chemical composition of …
-
Nonlinear Dynamics of Tapping Mode Atomic Force Microscopy
… of tapping mode atomic force microscopes (AFM) subjected to a base harmonic excitation. The nonlinear dynamics of the AFM microcantilever are studied in both of the monostable and bistable phases with the microcantilever tip being, respectively, located in the monostable and bistable …
-
Scanning Probe Microscopy of Biomaterials and Nanoscale Biomechanics
Since its invention, operation of AFM in liquid for imaging soft biomaterials has been hindered by a low quality factor caused by large drag forces on the cantilever. Utilizing the small dimensions of a nanoneedle, the new method presented in this dissertation resolves the complications by keeping …
-
Materials and methods for nanolithography using scanning thermal cantilever probes
… work presents the novel applications of heated AFM tip in nanolithography. Different strategies were investigated for patterning materials using heated AFM tip. New materials were developed for these new nanolithography methods. Simulation and modeling work was done to further understand the …
-
Control approach to high-speed large-range AFM imaging and nanofabrication
… high-speed large-range atomic force microscope (AFM) imaging and nanofabrication, respectively. High-speed large-range AFM imaging and nanofabrication are needed in many areas and have attracted great interests. Challenges, however, must be overcome because in high-speed large-range AFM …
-
Smart cantilever beams for nanomanipulation
… beam, consisting of an atomic force microscope probe bonded with a piezoelectric actuator, is proposed to enhance the ability of mechanical nanomanipulation. A precise three-section Euler-Bernoulli beam model is developed to describe the dynamics of the beam. The forced vibration solution of …
Page 1 of 4