Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 34 for “"AL 7075"”.

  1. Modeling microstructurally small crack growth in Al 7075-T6

    Fatigue of metals is a problem that affects almost all sectors of industry, from energy to transportation, and failures to account for fatigue or incorrect estimations of service life have cost many lives. To mitigate such fatigue failures, engineers must be able to reliably predict the fatigue …

    gatech Repository record for Modeling microstructurally small crack growth in Al 7075-T6 (opens in a new tab)

  2. Electrochemical characterization of cerium-based conversion coatings on Al 7075-T6

    "This research used electrochemical techniques to characterize the deposition and corrosion protection behavior of cerium-based conversion coatings on AI 7075-T6. Alkaline activation decreased native oxide impedance (5.9 kΩ-cm²) by ~25% promoting deposition of 250-500 mn coatings. Activation in …

    must-thes Repository record for Electrochemical characterization of cerium-based conversion coatings on Al 7075-T6 (opens in a new tab)

  3. CORROSION AND WEAR RESISTANCE OF DUAL-REINFORCED AL-7075 COLD SPRAYED COATINGS

    … been recognized for their improvement of mechanical properties such as adhesion strength and hardness. Unknown at this time are the effects that reinforced coatings have on the wear and corrosion resistance of aircraft-grade aluminum. In this study, aluminum 7075 powders were reinforced with a …

    nps Repository record for CORROSION AND WEAR RESISTANCE OF DUAL-REINFORCED AL-7075 COLD SPRAYED COATINGS (opens in a new tab)

  4. Grain Boundary Character Distribution in the HAZ of Friction Stir-Processed Al 7075 T7

    … heat affected zone (HAZ) of friction stir welded Al 7075 T7 shows diminished corrosion resistance properties when compared with the parent material. Corrosion attack in this region of the weld is primarily intergranular and is associated with the presence of precipitate free zones. Current TEM …

    byu Repository record for Grain Boundary Character Distribution in the HAZ of Friction Stir-Processed Al 7075 T7 (opens in a new tab) Download PDF for Grain Boundary Character Distribution in the HAZ of Friction Stir-Processed Al 7075 T7 (opens in a new tab)

  5. Corrosion Protection of Friction Stir Welded Al 7075 Panel for use in Aerospace Applications using Cold Gas Dynamic Spray

    … as a means of joining previously unweldable Al 7075, a high-strength aluminum alloy commonly used in aerospace for its high specific strength. This eliminated the need for costly and time consuming rivets to be installed, firstly reducing the production cost of the airplane and secondly …

    ottawa-retro Repository record for Corrosion Protection of Friction Stir Welded Al 7075 Panel for use in Aerospace Applications using Cold Gas Dynamic Spray (opens in a new tab)

  6. Development of High Strength Aluminum Alloys for Directed Energy Deposition Additive Manufacturing

    … (DED) is of particular interest for structural Al alloys, as it combines the faster cooling rates with the flexibility to repair or build large-scale geometries. The localized thermal cycling inherent to the DED process influences solidification behavior, grain refinement and precipitate …

    waterloo Repository record for Development of High Strength Aluminum Alloys for Directed Energy Deposition Additive Manufacturing (opens in a new tab)

  7. Development and control of strength anisotropy and crystallographic texture during extrusion of aluminum 2195 and 7075

    The addition of lithium to high strength aluminum alloys significantly improves specific strength. Indeed, for aerospace applications, the third generation Al-Cu-Li alloy, Al 2195, is competitive with composite materials. However, unlike its non-lithium containing counterpart, Al 7075, it suffers …

    gatech Repository record for Development and control of strength anisotropy and crystallographic texture during extrusion of aluminum 2195 and 7075 (opens in a new tab)

  8. Aluminum-based Material Fabrication by Friction Stir Processing: Microstructural Evolution and Mechanical Properties

    … (FSP) is an energy efficient solid-state material processing technique for microstructure modification of commercial high-strength Al alloys. Many variant techniques were developed in recent years that enabled light-weight and high-strength structure fabrication. Identifying relationship among …

    utk-theses Repository record for Aluminum-based Material Fabrication by Friction Stir Processing: Microstructural Evolution and Mechanical Properties (opens in a new tab)

  9. Zkoušky tepelné vodivosti struktur pro kosmické aplikace

    … měřením bronzového (CuSn8) a hliníkového (Al 7075) vzorku v termovakuové komoře za specificky definovaných podmínek, které se lišily vstupními výkony a teplotami regulovaných testů. Úvodní část práce řeší konstrukci termovakuové komory a potenciální výzvy, spjaté s roblematikou měření ve …

    brno-tech Repository record for Zkoušky tepelné vodivosti struktur pro kosmické aplikace (opens in a new tab)

  10. Analysis of Activation and Residual Radiation Doses in the MEC-U Laser Facility

    … beyond tens of MeV during each experiment. Normal operation of this facility will result in activation of the instrumentation and structure in the experimental hutch. This research aims to quantify the hazards from activation over the lifetime of the MEC-U, and use this data to make informed …

    gatech Repository record for Analysis of Activation and Residual Radiation Doses in the MEC-U Laser Facility (opens in a new tab)

  11. Improvements to the computational pipeline in crystal plasticity estimates of high cycle fatigue of microstructures

    … quantification of fatigue lives of materials as understood via simulation of crystal plasticity models applied to synthetically reconstructed microstructures. A computational framework has been developed to automate standardized analysis of crystal plasticity models in the high cycle …

    gatech Repository record for Improvements to the computational pipeline in crystal plasticity estimates of high cycle fatigue of microstructures (opens in a new tab)

  12. Corrosion of Aluminum Alloys-Polymer Matrix Composite Interfaces

    The accelerated corrosion of several carbon-fiber (CFRP) and E-glass/epoxy (GFRP) composite laminated aluminum alloys [i.e., Al 1100-H14, Al 5456-H116 (non-sensitized), Al 5456-H116 (sensitized), & Al 7075-T6] was studied to characterize the interfacial corrosion between the composite and aluminum …

    hawaii Repository record for Corrosion of Aluminum Alloys-Polymer Matrix Composite Interfaces (opens in a new tab)

  13. Non-Dimensional Modeling of the Effects of Weld Parameters on Peak Temperature and Cooling Rate in Friction Stir Welding

    … the resulting properties depend on the thermal cycle of the weld. Buckingham's Pi theorem and heat transfer analysis was used to identify dimensionless parameters relevant to the FSW process. Experimental data from Al 7075 and HSLA-65 on five different backing plate materials and a wide range …

    byu Repository record for Non-Dimensional Modeling of the Effects of Weld Parameters on Peak Temperature and Cooling Rate in Friction Stir Welding (opens in a new tab) Download PDF for Non-Dimensional Modeling of the Effects of Weld Parameters on Peak Temperature and Cooling Rate in Friction Stir Welding (opens in a new tab)

  14. Corrosion of Aluminum Alloys-Polymer Matrix Composite Interfaces in Diverse Natural Atmospheric Environments

    The environmental corrosion of carbon-fiber/epoxy and E-glass/epoxy composite laminated aluminum alloys [e.g., Al 1100-H14, Al 5456-H116 (non-sensitized), Al 5456-H116 (sensitized), and Al 7075-T6] was studied to characterize the interfacial corrosion between the composite and the aluminum …

    hawaii Repository record for Corrosion of Aluminum Alloys-Polymer Matrix Composite Interfaces in Diverse Natural Atmospheric Environments (opens in a new tab)

  15. Stress Intensity Factor Dependence Of Hg-al Liquid Metal Embrittlement

    When high strength aluminum alloys are subjected to liquid metals, physical and chemical reactions ensue resulting in what is known as liquid metal embrittlement (LME). A subset of environmentally-assisted cracking, LME is exhibited when a liquid metal, e.g. Hg or Ga, comes into intimate contact …

    ucf Repository record for Stress Intensity Factor Dependence Of Hg-al Liquid Metal Embrittlement (opens in a new tab)

  16. FUNCTIONALLY GRADED ALUMINUM METAL MATRIX COMPOSITE COLD SPRAY COATINGS ON ALUMINUM 7075 SUBSTRATE

    Aluminum alloys have widespread use in the aerospace and maritime industries due to their high specific strength, good corrosion resistance, and low cost. Gas dynamic cold spray, cold spray for short, is a thermal spray technique that is used for in-field repair of metallic surfaces to include …

    nps Repository record for FUNCTIONALLY GRADED ALUMINUM METAL MATRIX COMPOSITE COLD SPRAY COATINGS ON ALUMINUM 7075 SUBSTRATE (opens in a new tab)

  17. Fabrication and characterization of bulk nanostructured materials of steel and aluminum alloys by air blast shot peening

    In recent years, bulk nanostructured materials processed by methods of severe plastic deformation (SPD) have attracted the growing interest in academia and industry. This interest is caused not only by unique physical and mechanical properties inherent to various nanostructured materials, e.g., …

    alabama Repository record for Fabrication and characterization of bulk nanostructured materials of steel and aluminum alloys by air blast shot peening (opens in a new tab)

  18. Improvement of fatigue and corrosion-fatigue resistance of AZ31B cast alloy by cold spray coating and top coating

    … high interest in industries toward magnesium alloys because of its excellent properties such as specific strength, low density, and fatigue strength. Application of magnesium in the vehicle structure saves energy and reduces gas emission which consequently improves the performance of the …

    waterloo Repository record for Improvement of fatigue and corrosion-fatigue resistance of AZ31B cast alloy by cold spray coating and top coating (opens in a new tab)

  19. CLASSIFICATION AND PROBABILISTIC MODEL DEVELOPMENT FOR CREEP FAILURES OF STRUCTURES: STUDY OF X-70 CARBON STEEL AND 7075-T6 ALUMINUM ALLOYS

    … such as piping used in the nuclear, chemical and petroleum industries, have been studied. Sixty two creep equations have been identified, and further classified into two simple groups of power law and exponential models. Then, a probabilistic model has been developed and compared with the …

    maryland Repository record for CLASSIFICATION AND PROBABILISTIC MODEL DEVELOPMENT FOR CREEP FAILURES OF STRUCTURES: STUDY OF X-70 CARBON STEEL AND 7075-T6 ALUMINUM ALLOYS (opens in a new tab)

Page 1 of 2