Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"AMMONIUM FLUORIDE"”.
-
A study of the dissolution of titanium in acids with ammonium fluoride added
… and hydrochloric acids, it was decided to add ammonium fluoride to these slower attacking acids. This would serve the purpose of introducing a fluorine ion in controlled, limited amounts, in sufficient quantity to remove the corrosion resistant surface layer or the titanium, and then give the …
-
Comparison of an experimental single application two-step 25600 ppm Ammonium Fluoride / 34100 - 48600 ppm Nano-Calcium Fluoride solution vs. a one-step 7700 ppm Ammonium Fluoride varnish for Preventing Enamel Loss from Erosion and Attrition in vitro
<b>Introduction:</b> The potential for high-fluoride treatments to prevent progression of erosion and attrition is not fully understood. This thesis investigated the effect of an experimental two-step ammonium fluoride/nano-calcium fluoride formulation (25600 ppm NH4F plus 34100 - 48600 ppm CaF2) …
-
An ion-binding approach to asymmetric allylation reactions
… cooperative thiourea catalyst that could bind to fluoride to control allylation using an allylsilane. Optimization using a non-chiral thiourea (Schreiner’s catalyst) demonstrated that the reaction proceeded in high yield with TBAT onto an N-benzoylhydrazone. A chiral cooperative thiourea catalyst …
-
ΜΕΛΕΤΗ ΤΗΣ ΕΠΙΔΡΑΣΗΣ ΤΟΥ ΦΘΟΡΙΟΥ ΣΤΙΣ ΦΥΣΙΚΟΧΗΜΙΚΕΣ ΙΔΙΟΤΗΤΕΣ, ΣΤΗ ΔΡΑΣΤΙΚΟΤΗΤΑ ΚΑΙ ΕΚΛΕΚΤΙΚΟΤΗΤΑ ΤΩΝ ΣΤΗΡΙΖΟΜΕΝΩΝ ΣΕ Γ-ΑΛΟΥΜΙΝΑ ΚΑΤΑΛΥΤΩΝ ΚΟΒΑΛΤΙΟΥ-ΜΟΛΥΒΔΑΙΝΙΟΥ
… (3.5% WT CO3O4), BUT VARIOUSAMOUNTS OF THE FLUORIDE IONS (0.0-2. 0% WT F), INTRODUCED AFTER MOLYBDENUM ANDCOBALT. MOLYBDENUM WAS DEPOSITED FIRST BY SUCCESSIVE DRY IMREGNATION OF THE CARRIER WITH AN AQUEOUS SOLUTION OF AMMONIUM HEPTAMOLYBDATE. COBALT AND FLUORINE WERE DEPOSITED BY SINGLE-STEP …
-
Development of Novel Liquid Chromatography-Electrospray Tandem Mass Spectrometry Approaches for the Structural Characterization of Brevetoxins Including in vitro Metabolites
… nano-electrospray experiments, the addition of ammonium fluoride resulted in the formation of the ammonium adduct or protonated brevetoxin with a concomitant decrease of the sodium adduct peak. Product ion spectra of [M + NH4]+ and [M + H]+ were similar and provided useful structural …
-
The generation and fate of strained, unsaturated, bicyclic hydrocarbons
… vapors of 2 over solid-supported tetra-n-butyl ammonium fluoride at room temperature and reduced pressure. Three dimers of 1 were identified by their X-ray crystal structures. A pair of diastereomeric, head-to-head dimers, along with the previously known head-to-tail dimer demonstrate the …
-
Control of Pore Characteristics of Porous Silicon Using Non-toxic Electrochemical Etching for Photovoltaics and Supercapacitor Applications
… anodization method using a non-toxic ammonium-fluoride (NH4Fl) based electrolytic solution. Control of pore characteristic has been achieved by flexible control of etching parameters such as voltage, current and time. Higher performance supercapacitors have been made by passivating the …
-
Development of doped TiO₂ nanostructures for photo-electrochemical hydrogen generation
… in an electrolyte bath, which consisted of ammonium fluoride, ethylene glycol, and deionized water. The Ni-TiO₂ samples were annealed in air or inert atmospheres to produce crystalline structures. Ni-doped TiO₂ nanoarray surface morphology, composition, and microstructure were characterized …
-
A STUDY OF THE ACID-CATALYZED SYNTHESIS OF MTBE ON INORGANIC SOLID ACIDS
… COMPOUNDS LIKE TRIFLIC ACID AND AMMONIUM FLUORIDE. ALL THE ABOVE METHODS WERE FOUND TO SIGNIFICANTLY IMPROVE THE PERFORMANCE OF ZEOLITES FOR MTBE FORMATION UNDER CERTAIN LIMITATIONS. THE RESULTS OF THIS STUDY INDICATE THAT IT IS THE PRESENCE OF EXTRA-LATTICE AL FORMED AS A RESULT …
-
Sorption of organic compounds on oil shale materials and sorption of selected chemicals on a Western soil
… (arsenic, cadmium, calcium, potassium, iron, ammonium, fluoride, and sulfate) was also determined. The results of the study showed that the sorption capacity of oil shales for organic compounds varied with the retorting conditions of spent shales, the characteristics of sorbates, and the …
-
Synthesis of Optimized InP/ZnS Core/Shell Nanocrystals and TiO2 Nanotubes for Quantum Dot Sensitized Solar Cells
… were produced by an anodization method using ammonium fluoride. The free-standing nanotubes were formed under the condition that the chemical dissolution speed associated with fluoride concentration was faster than the speed of Ti oxidation. Highly ordered free-standing anatase form TiO2 …
-
Porous Polycrystalline Silicon for Application in Optoelectronic Devices
… electrolyte composed of orthophosphoric acid, ammonium fluoride, and deionized (DI) water. A non-HF aqueous electrolyte was successfully developed for the first time, which, combined with the anodization parameters (current, voltage, and time), allows controlled formation of uniform porous …
-
The Chemical And Physical Mechanisms Determining The Morphology Of Wet-Chemically Etched Si(100)
… technique. Using this combined approach, aqueous ammonium fluoride etching of Si(100) is shown to produce near-atomically flat surfaces consisting of alternating rows of silicon dihydrides. A new assignment of the vibrational modes accounts for the presence of both strained and unstrained …
-
Occlusion of dentinal tubules by photoactive sintering of calcium phosphate minerals doped with erbium, aluminium and fluoride compounds
… minerals doped with erbium, aluminium, and fluoride compounds under laser irradiation. The investigation included the synthesis and characterisation of calcium phosphate (CaP) powders, preparation of hypersensitive dentine sections, and coating of dentine sections with CaP powders followed …
-
Epitaxial Ge-Sb-Te Thin Films by Pulsed Laser Deposition
… Film deposition on pre-cleaned and buffered ammonium fluoride etched Si(111) show growth of epitaxial hexagonal GST, similar to that of the deposition on BaF2(111). When the Si-substrates were heated directly to the deposition temperature films of high crystal-line quality were obtained. An …
-
Silicon-Based Hybrid Organic-Inorganic Polymers and Coatings
… primers. The condensation catalyst, tetrabutyl ammonium fluoride (TBAF), played an important role in the performance of the HOI binders and the derived Mg-rich primers. It enabled higher crosslink density and better barrier properties, however, reacted with Mg particles during salt spray …
-
Producing Enantiopure Secondary Alcohols via a Silylation based Kinetic Resolution and a One-Pot Polishing Sequence
… silyl ethers through the use of chiral fluoride phase transfer catalysts. Initially, desilylation was attempted with a variety of commercially available catalysts and fluoride sources including: ammonium salt catalysts with potassium fluoride, nucleophilic catalysts with benzoyl …
-
Electrochemical Studies in Fluoride Based Solutions for Semiconductor Processing Applications
Fluoride based chemical systems are widely used at various stages in microelectronic processing, particularly for wet cleaning and etching applications. Some examples include the use of semi aqueous fluoride (SAF) solutions in back end of line cleaning, the use of dilute HF solutions as etchants …
Page 1 of 2