Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 490 for “"ANATASE"”.

  1. Characterizing The Mechanism Of Nanocrystalline Anatase To Rutile Phase Transformation

    … phase transformation. Second, the dependence of anatase to rutile phase transformation and crystal growth kinetics on crystallite size and aggregation state of the particles in aqueous suspension is explored by varying reaction conditions. Rates of anatase growth and its transformation to rutile …

    umn Repository record for Characterizing The Mechanism Of Nanocrystalline Anatase To Rutile Phase Transformation (opens in a new tab)

  2. Electronic Properties of Anatase TiO2 and Iron (III) Doped TiO2 Nanoparticles

    … a photocatalyst. Among all phases, TiO2 in the anatase phase displayed the highest photocatalytic rates for dye decompositions. Iron is selected as a dopant to maximize the efficiency under solar light. In this study, we use structural, morphological, chemical methods to study nanoparticles …

    york Repository record for Electronic Properties of Anatase TiO2 and Iron (III) Doped TiO2 Nanoparticles (opens in a new tab)

  3. Investigation of defect formation and control in poly-crystalline anatase titanium dioxide

    … been praised for the catalytic activity of its anatase phase, its abundance in nature, low toxicity, stability in aqueous environments and ease of processing. Among its drawbacks is a high native carrier concentration likely due to the formation of oxygen vacancies and their clustering at grain …

    uiuc Repository record for Investigation of defect formation and control in poly-crystalline anatase titanium dioxide (opens in a new tab)

  4. Growing anatase and rutile titania on c-cut sapphire using pulsed-laser deposition

    … protocol that facilitates the growth of both anatase and rutile phases of titania without changing the substrate or target material. Finally, I also demonstrate the development of the first recipe for growth of anatase titania on a sapphire substrate.

    ttu Repository record for Growing anatase and rutile titania on c-cut sapphire using pulsed-laser deposition (opens in a new tab)

  5. Anatase TiO2 nanotubes as negative electrodes for Lithium-ion and Sodium-ion microbatteries

    … thesis is to gain a deeper understanding of the anatase TiO2 nanotubes as negative electrodes in lithium-ion and sodium-ion microbatteries by researching their fundamental intercalation processes. The nano-structuring of the anatase TiO2 electrodes allows to improve their electrochemical …

    kent Download PDF for Anatase TiO2 nanotubes as negative electrodes for Lithium-ion and Sodium-ion microbatteries (opens in a new tab)

  6. Investigation of Lanthanide-Doped Anatase TiO2 Core-Shell Nanoparticles For Photocatalysis and Gas Sensing

    Anatase TiO2 has been shown to be potential applications for photo-remediation of chemical waste as well as for photocatalytic splitting of water. The catalytic properties of TiO2 materials can be modified by doping with lanthanide (Ln) ions. In order to minimize the distortion and/or change of the …

    mo-state Repository record for Investigation of Lanthanide-Doped Anatase TiO2 Core-Shell Nanoparticles For Photocatalysis and Gas Sensing (opens in a new tab)

  7. Synthesis, Characterization, and Application of High Surface Area, Mesoporous, Stabilized Anatase TiO2 Catalyst Supports

    … on the stability, surface area, and porosity of anatase TiO2 supports were investigated. Results show that dopants increased the surface area and thermal stability of anatase through structural modifications and grain growth inhibition. Stabilized titanias produced by this method demonstrated …

    byu Repository record for Synthesis, Characterization, and Application of High Surface Area, Mesoporous, Stabilized Anatase TiO2 Catalyst Supports (opens in a new tab) Download PDF for Synthesis, Characterization, and Application of High Surface Area, Mesoporous, Stabilized Anatase TiO2 Catalyst Supports (opens in a new tab)

  8. Exploiting polar interfaces for photocatalytic water splitting: application to the anatase-cuprous oxide heterojunction

    … surface polarity compensation mechanisms in the anatase (TiO2) / cuprous oxide (Cu2O) heterojunction, a system which has recently been realized in experiment. Due to its low valence band edge, anatase has a good oxidation potential; by contrast cuprous oxide has a good reduction potential due to …

    uiuc Repository record for Exploiting polar interfaces for photocatalytic water splitting: application to the anatase-cuprous oxide heterojunction (opens in a new tab)

  9. EPR of substitutional and of charge compensated Fe3+ in anatase (TiO2) and its temperature dependence

    … were observed in natural single crystals of anatase between 1 °K and 1230 °K and are interpreted as due to regular substitutional Fe(3+) (I) and to Fe (3+) combined with an oxygen vacancy at a nearest neighbour site (II) . The spin Hamiltonian parameter b(2)° of (I) decreases from +457 x …

    ubc Repository record for EPR of substitutional and of charge compensated Fe3+ in anatase (TiO2) and its temperature dependence (opens in a new tab) Download PDF for EPR of substitutional and of charge compensated Fe3+ in anatase (TiO2) and its temperature dependence (opens in a new tab)

  10. Retention of the anatase phase in TiO2 through the use of bauxite and zircon dopants

    Preserving the anatase phase of TiO2 is of interest due to the photocatalytic activity of this phase, which is generally considered superior to rutile Ti02 due to a higher surface area. The retardation of the anatase to rutile transition through the use of low cost dopants, zircon and bauxite, was …

    unsw Repository record for Retention of the anatase phase in TiO2 through the use of bauxite and zircon dopants (opens in a new tab)

  11. Fabricate and Investigate the Physical Properties of Anatase-TiO2 Thin Films and Freestanding Membranes for Device Application

    … freestanding TiO2 with a near 100% stable (001) anatase surface is still a challenge. In this research thesis, I firstly reported a convenient way to produce highly conductive TiO2 thin film that can be used to replace ITO and FTO for the transparent electrode application. Subsequently, a …

    unsw Repository record for Fabricate and Investigate the Physical Properties of Anatase-TiO2 Thin Films and Freestanding Membranes for Device Application (opens in a new tab)

  12. The Effect of Zr-Doping and Crystallite Size on the Mechanical Properties of TiO2 Rutile and Anatase

    … processes. The most abundant phases are rutile, anatase and brookite. In addition, there are a number of metastable low density modifications. The compression behavior of anatase and rutile was studied for TiO2 and Ti0.9Zr0.1O2 starting materials with crystallite size in the micro- and also …

    bayreuth Repository record for The Effect of Zr-Doping and Crystallite Size on the Mechanical Properties of TiO2 Rutile and Anatase (opens in a new tab)

  13. Materials and magnetic studies of cobalt-doped anatase titanium dioxide and perovskite strontium titanate as potential dilute magnetic semiconductors

    Deposition of cobalt-doped anatase TiO2 and cobalt-doped perovskite SrTiO3 (STO) utilizing molecular beam epitaxy (MBE) was investigated in an effort to achieve a dilute magnetic semiconductor (DMS) system with desirable materials and magnetic properties for application in future Si-based …

    washington Repository record for Materials and magnetic studies of cobalt-doped anatase titanium dioxide and perovskite strontium titanate as potential dilute magnetic semiconductors (opens in a new tab)

Page 1 of 25