Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"ANSYS Simulation"”.
-
MEMS micro-bridge actuator for potential application in optical switching
… actuator is designed, simulated using ANSYS, fabricated and tested. The results from the testing have shown a good agreement with analytical prediction and ANSYS simulation. The actuator demonstrated bi-stability, two-way actuation and 31µm out-of-plane movement between the two-states …
-
Impact Investigation Using Ansys Autodyn Code on a Reinforced Concrete Model Due To TNT Shaped Charge for Nuclear Security Vulnerability Assessments
… Toluene (TNT) shaped charge using a numerical simulation software. There are many commercial numerical simulation software that can be used to solve engineering problems in real world scenarios, such as ANSYS, ABAQUS, LS-DYNA, etc. ANSYS Simulation Software is one of the strongest and …
-
Optimization of in-plane directional microphone
… beam. Theoretical results are compared with simulation results to prove the network model. This piezoelectric cantilever beam also forms the basis of the XY directional microphone. In chapter 2, principles of XY directional microphone are explained at the beginning. Further analysis shows the …
-
Thermomechanical and Vibrational Fatigue Life Assessment of Railway Wheels
… verify that the contact pressure observed in the Ansys FEA analysis is consistent with the Hertzian contact theory. The contact pressure estimated by Ansys simulation is 656 MPa and the mathematical calculation is 680 MPa showing therefore a variation of only 1.25%. Having verified the FEA model …
-
A finite element test bed for development of feedback control laws for electrostatic MEMS
This project presents the ANSYS simulation techniques for an electrostatically-actuated MEMS device incorporating feedback control laws. The electrostatic MEMS device consists of a movable electrode, suspended on flexible, elastic structures, and one or more fixed drive electrodes. Nonlinear …
-
High Voltage Aqueous Electrolyte Based Structural Supercapacitors for Electric Vehicles
… Area (EpA)". The design optimization using ANSYS simulation and confirmation using fabricated samples enabled us to derive a series of ratios between EcA vs. EpA. This data is highly beneficial for maximizing the charge storage ability of the composite for a given application while …
-
Real-time Visualization, Numerical Simulation and Mathematical Calculation of Two-Phase Fluid Flow from the Microscopic Perspective
… combines real-time visualization, numerical simulation and mathematical calculation to explore the gas snap-off condition in the liquid-gas twophase fluid flow from the microscopic perspective. In the first phase of the research, the artificial glass micromodels are used for water film …
-
Experimental and Finite Element Analysis of Vacuum Infused FRP Composite π-Joints
… three-point flexural experiments, in addition to ANSYS simulation, this thesis provides valuable insights into the manufacturing processes and design optimization of composite π-joints for aerospace applications. Coupon testing demonstrated that prioritizing a longitudinal stitch bias and an …
-
OPTIMAL MEMS PLATE DESIGN AND CONTROL FOR LARGE CHANNEL COUNT OPTICAL SWITCHES
… A design example, which is confirmed by ANSYS simulation, is given along with a design methodology. By considering the squeeze film damping effects, the transient response of this optimal plate actuator is performed. The system stability is proven by using a Lyapunov function and the …
-
Characterisation and simulation of bidirectional multiphase flow in tubes
… and flooding correlations, in addition, CFD Ansys simulation to carry out experimental data analysis and reviewed methodologies that focus on the churn/annular-annular mist flow regimes transition explored by other researchers. The outcome was a valid empirical model that correlates flow …
-
Evaluation of Preferential Vaporization Characteristics of Isolated Single Droplet Combustion in a Converging Channel
… values predicted by a one-dimensional numerical simulation. To investigate if the observed differences were the result of turbulent flow and the development of a boundary layer within the channel, a model was designed and analyzed in Ansys Fluent. The developed Ansys simulation indicated that …
-
Thermal Modeling Techniques of Heat Assisted Single Point Incremental Forming in ANSYS Workbench
… for analyzing heat assisted SPIF of polymers in ANSYS workbench and to use the ANSYS analysis to improve the accuracy of the final part in reference to the desire CAD model. This work will present methods for modeling the temperature profiles of the polymer sheets during the heat assisted SPIF …
-
Thermal/Mechanical/Structural Properties of Polycrystalline Diamond and Novel Layered Materials for Electronic Devices
… evaluated by time-domain thermoreflectance and ANSYS simulation; at best a 15% reduction in peak temperature was obtained when only the source-drain opening of a passivated AlGaN/GaN-on-Si HEMT is overgrown with PCD. <br/>Meanwhile, next generation higher compacted electronics for future …
-
Development Of Advanced Multi-Nozzle Multi-Material 3d Printing
… parameters were used to validate the results in ANSYS simulations. A fully 3D printed 100% elastomeric biomimetic octopus arm with gradient stiffness was successfully fabricated. A comparative study was conducted between the 100% elastomeric arm and an identical arm design integrated with …
-
Design and Testing of Experimental Langmuir Turbulence Facilities
… Image Velocimetry measurements within the tank. ANSYS will be used to show whether the tank is structurally strong enough to support the fluid. An enhancement is found that prevents a frontward bend of tank wall, which is analyzed by ANSYS to find an optimized construction to minimize tank …
-
Static, dynamic and levitation characteristics of squeeze film air journal bearing: Designing, modelling, simulation and fluid solid interaction
… from a finite-element model implemented in ANSYS. Two Modes, the 13th and 23rd, at the respective frequencies of 16.320 kHz and 25.322 kHz, were identified for further investigation by experiments with respect to the squeeze film thickness and its load-carrying capacity. For Cu bearing, the …
-
Development of an Upper Arm Phantom for BP Measurement
… Element Analysis (FEA) of the upper arm BP simulation. The characterisation aided in selecting the appropriate material to fabricate the anatomical upper arm phantom. A test rig was built for the arm phantom to obtain pressure-volume relationship of the soft tissue components during NIBP …
-
Spolehlivost bezolovnatých pájek a vybrané způsoby odhadu jejich životnosti
… který byl implementován do prostředí programu ANSYS. Výsledky z různých určovacích metod byly porovnány a byly formulovány závěry pojednávající o vhodnosti prezentovaných predikčních metod.
-
Thermal Modeling and Analysis of Roadway Embedded Wireless Power Transfer Modules
… components and using those properties in a simulation. Specifically, to measure the properties of concrete, an experiment with a matching computer simulation is used. These measured properties and others are then used in a different computer simulation to explore how quickly a charging …
-
Experimental study of oil coking problem and contribution to the modelling of heat transfer in turbochargers
… the turbo-charging a challenging task. Numerical simulation opens a range of possibilities to study the performance, efficiency and design of components in the turbocharger, but requires continued accuracy refinements. In this thesis, a great effort has been made to improve the overall …