Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"ARAMID FIBERS"”.
-
Carrier assisted dyeing of m-aramid fibers
… and garments dimension: the Technical Textile. Aramids are, since 90’s, the most important technical textile for protection garments, and in Biella district a lot of factories started to handle them. Since some factories started to produce yarn and fabric for protective garments, the need to dye …
-
Structure and defects in high-performance aramid fibers
High performance aramid fibers, such as Kevlar, AuTx, and Twaron have been designed for ultra-high specific strength and stiffness. These fibers derive their superior properties from the high degree of molecular orientation that allows for efficient load transfer to the backbone covalent bond axis. …
-
Limiting factors of the tensile strength of aramid fibers
… the evolution of crystallite orientation in aramid fibers during loading and their mechanical and failure behavior were investigated. Three types of as-spun aramid fibers and a heat-treated type were employed with initial distributions of crystallite orientations between 16.7º and 9.7º with …
-
The bonding mechanism of aramid fibers to epoxy matrices
Thesis (M.S.)--Michigan State University. Department of Chemical Engineering, 1988
-
Radiation-Induced Modification of Aramid Fibers: Optimizing Crosslinking Reactions and Indirect Grafting of Nanocellulose for Body Armor Applications
… was to design, synthesize, and analyze novel aramid fibers by covalently grafting nanocellulose through electron beam irradiation. These nanocellulose functionalized fibers showed enhanced strength and larger surface areas, which improves their performance and applicability in fiber-reinforced …
-
PERFORMANCE ASSESSMENT OF FIBER-REINFORCED ASPHALT MIXTURES: A COMPREHENSIVE LABORATORY AND FULL-SCALE INVESTIGATION
… polymers, geogrids etc.). Among these modifiers, fibers were introduced to improve the resistance of asphalt mixtures to rutting and cracking. Addition of fibers into the asphalt mixture is always challenging because of their impact on volumetric properties and clumping while mixing. Therefore, a …
-
Transient moisture effects on the viscoelasticity of synthetic fibers and composites
… effects on the creep behavior of synthetic fibers and composite materials. This study consisted of two main parts: 1). a phenomenological investigation of the transient moisture effects in synthetic fibers and composite materials and 2). mechanistic studies of the observed phenomenon. The …
-
The Cryogenic Bonding Evaluation at the Metallic-Composite Interface of a Composite Overwrapped Pressure Vessel with Additional Impact Investigation
… wound with several combinations of graphite and aramid fibers and were prepared with different resin systems. The rings were subjected to varying levels of Charpy impact damage then pulled to failure in tension. It was found that the addition of elastic aramid fibers with the carbon fiber …
-
Durability Performance of Aramid Fiber-Reinforced Asphalt Mixtures Under Moisture and Low-Temperature Conditions
… life. This study evaluates the effectiveness of aramid fiber-reinforced mixtures (FRM) in improving resistance to moisture damage compared with conventional control mixtures (CM), and lime-treated mixtures (LTM).A comprehensive laboratory investigation was conducted on both laboratory-produced …
-
PRODUCTION AND CHARACTERIZATION OF ARAMID COPOLYMER FIBERS FOR USE IN CUT PROTECTION
High-performance fibers such as para-aramids are used extensively in gloves for cut protection. However, the inherent cut resistance of these fibers and the relationship between cut resistance and other material properties is not known. To better understand cut resistance at the material level, an …
-
Uso da ferramenta Dmadv para criação de protótipo de Sandbag de meta-aramida e aplicação de teste de biodegradabilidade
… the use of textile structures made of meta-aramid fibers in an application of an environmental nature (forest fires), from a subtype of geotextile structures defined as sandbags. The model was developed, theoretically, with a basis for the development of prototypes / new products based on …
-
Sound Attenuation Performance of Fiber-reinforced Polymer Composite Circumaural Hearing Protection Devices
… polymer composite (FRPC) materials such as aramid fibers used in body armor, have high theoretical values of acoustic impedance due to a fundamentally high modulus of elasticity and may offer a superior level of hearing protection over original equipment (OE) thermoplastic CAHPDs. The …
-
Development of hot mix asphalt using fractionated coarse and fine reclaimed asphalt pavement (RAP) and pulp aramid fiber (PAF) for cold climate
… HMA properties have been studied here. Pulp Aramid Fibers (PAF) was added to HMA to study their effectiveness. Performance tests and thermomechanical tests such as tension-compression fatigue tests, thermal cracking resistance (TSRST), rutting resistance, indirect tension test, complex …
-
Interface durability of externally bonded GFRP to normal and high-performance concrete
… and rehabilitation of concrete structures. Glass fibers exhibit high strength to weight ratio and low cost in comparison to carbon and aramid fibers. However, previous studies have shown that glass fibers are vulnerable to attack caused by harsh environmental weathering agents such as …
-
Determination of fiber orientation of composites using wide angle X-ray diffraction
… (PMMA) matrix with short crystalline aramid (Kevlar 49) reinforcing fibers in a proportion 80/20 in volume. Rheological measurements only cover the shear viscosity (n) in the high shear rate range due to flow instabilities and experimental difficulties which did not permit carrying out …
-
Long Term Stability and Implications for Performance of High Strength Fibers Used in Body Armor
… structure) and properties of high strength fibers. The superior performance of the high strength fibers is predicated on the development of a highly aligned molecular structure that allows the polymer to exhibit a superior strength in the axial direction of the fiber. Armor manufacturers …
-
Performance of Multi-Composite Materials with Corrugated and Cell Geometries Under Low-Velocity Impact
… the advanced cell cores were produced with para-aramid fibers, though the matrix differed between the two manufacturing methods. The cores were subjected to a consistent drop-weight impact event under various impact cases where the makeup of the assembly differed. The findings of this testing …
-
Carbon Nanotube Characterization and Processing{Structure{Property Relationships of Solution Spun Fibers for Electronic Clothing
… efforts to develop strong and conductive CNT fibers were slow due to limited CNT production and lack of a suitable solvent due to the strong van der Waals forces between CNTs. However, significant progress in CNT fiber production came from the development of gram-quantity synthesis from the …
-
Carbon Nanotube Characterization and Processing{Structure{Property Relationships of Solution Spun Fibers for Electronic Clothing
… efforts to develop strong and conductive CNT fibers were slow due to limited CNT production and lack of a suitable solvent due to the strong van der Waals forces between CNTs. However, significant progress in CNT fiber production came from the development of gram-quantity synthesis from the …
Page 1 of 2