Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 111 for “"ASCE 7"”.
-
Análisis comparativo de la Norma E-030 y la Norma ASCE 7-22
… Se hará uso de la norma internacional americana ASCE 7-22, la cual se adaptará a la norma técnica peruana E 0.30 con la finalidad de obtener resultados más exactos en cuanto los diseños de las edificaciones que se acerquen a la realidad. Teniendo en cuenta los resultados de confianza podrían …
-
Análisis comparativo de la Norma E-030 y la Norma ASCE 7-22
… Se hará uso de la norma internacional americana ASCE 7-22, la cual se adaptará a la norma técnica peruana E 0.30 con la finalidad de obtener resultados más exactos en cuanto los diseños de las edificaciones que se acerquen a la realidad. Teniendo en cuenta los resultados de confianza podrían …
-
A Method for Conducting Push-over Tsunami Analysis in Accordance with ASCE 7-16
… of Chapter 6 Tsunami Loads and Effects in ASCE 7-16 Minimum Design Loads and Associated Criteria for Buildings and Other Structures, significant analytical effort will soon be required of structural engineers to ensure that susceptible buildings are appropriately designed and detailed to …
-
ASCE 7–05 Design Rule for Relative Strength in a Tall Buckling-Restrained Braced Frame Dual System
… codes without compromising ductility. Currently, ASCE 7-05 permits a variety of structural systems to be used in combination as a dual system yet the design requirements are limited to the following statement: Moment frames must be capable of resisting 25% of the seismic forces while the moment …
-
REEVALUATION OF ASCE 7-10 EXTERNAL PRESSURE COEFFICIENTS ON THE COMPONENTS AND CLADDING OF LOW-RISE BUILDINGS USING MODERN WIND TUNNEL TESTING DATA
… of the American Society of Civil Engineers (ASCE 7). Portions of the current version, ASCE 7-10, rely on wind tunnel tests that date back 30-50 years. In recent decades, advances in computer technology have allowed the simultaneous recording of many more pressure taps than was possible …
-
Performance Based Analysis of Steel Buildings
… of two separate building types, designed using ASCE 7-05, using the analysis procedures from ASCE 41-06. The results from the ASCE 41-06 analyses were compared to the expected performance level of Life Safety to determine the adequacy of the ASCE 7-05 design. ASCE 7-05 is intended to result in …
-
Sensitivity of Steel Purlins to Changes in Application of Wind Loads
… obtained using the wind design provisions in ASCE 7-16 Chapter 30 for Components and Cladding. The primary data of interest was shear and moment values along the length of the purlins, which were modeled as continuous beams. Comparisons were made between the resultant shear and moment from …
-
Approximating the Seismic Amplification Effects Experienced by Solar Towers Mounted on the Rooftops of Low-Rise Industrial Buildings
… of using amplification factors adopted by the ASCE 7-05Minimum Design Loads for Buildings and Other Structures to approximate seismic acceleration amplification for roof-mounted solar towers. To investigate the validity of the ASCE 7-05 amplification factors, this thesis conducts timehistory …
-
Dynamic gust response factors for transmission line structures
… loads acting on the transmission lines. The ASCE 7-95 Commentary Method (1995) has a procedure to evaluate the GRF based on the new 3-second gust wind speeds adopted in the code. This procedure is for general categories of structures. Davenport's model (1979) is tailored exclusively for …
-
Flood-Entrained Debris Impacts on Structures: A Structural-Hydraulic Numerical Analysis
… events. The American Society of Civil Engineers (ASCE) released Chapter 6 of ASCE 7-16, which was the world's first standard that addressed tsunami resilient design prescriptions in mandatory language. Chapter 6 of ASCE 7-16 classifies tsunami loads into three categories: (1) Hydrostatic loads; …
-
Wind Loads on Low-slope Roofs of Low-rise and Mid-rise Buildings with Large Plan Dimensions
… peak pressure coefficients recommended by ASCE 7-16 for low-slope roofs of low-rise buildings are much higher than the experimental findings and using those recommended by ASCE 7-10 is safe and more economical for large low-rise buildings. Also, for buildings of 8 m height or more, the …
-
Development of a Comprehensive Linear Response History Analysis Procedure for Seismic Load Analysis
… according to Chapter 16 of the American Standard ASCE 7-10. A careful analysis is presented about the selection of ground motions using real records and using artificial records generated such that their response spectrum matches with a defined target spectrum; three different techniques are …
-
Lateral Strength and Ductile Behavior of a Mortise-Tenon Connected Timber Frame
… of ductile racking while reliably complying with ASCE 7-10 building code drift speci! cations, implying an increase in the ASCE 7-10 ductility factor (R) for wood frames when used as lateral force resisting elements. A secondary goal was to promote traditional heavy timber framing as a main …
-
Simplified Seismic Design for Mid-Rise Buildings with Vertical Combination of Framing Systems
… standard American Society of Civil Engineers 7 (ASCE 7) (ASCE, 2010) at first. Then, by considering the difference in seismic design provisions between ASCE 7 and the Canadian code National Building Code of Canada 2010 (NBCC 2010) (NBCC, 2010), several modifications are made on the simplified …
-
WIND EFFECTS ON MONOSLOPED AND SAWTOOTH ROOFS
… compared with values in the literature and in ASCE 7 design load guidelines. In addition, the statistical analysis (root mean square) of wind pressure coefficients is discussed and it is found that they are co-related to the intensity of peak wind suctions. Wind pressure coefficients on …
-
Wind load factors for Atlantic and Gulf Coast hurricane winds
… to re-examine the wind load criteria used in the ASCE 7-95 Standard. In this standard, an unresolved issue about the wind load factor surrounding Load and Resistance Factor Design (LRFD) exists. The current edition of ASCE 7-95 contains a load factor for winds, but the load factor was derived …
-
Wind effects on a full-scale frame
… effects are computed for this building using ASCE 7 recommended pressure coefficients. These values have been compared with wind tunnel load effects. The magnitude of load effect obtained using ASCE 7-98 pressure coefficient values is higher than the mean value obtained using wind tunnel data …
-
DEVELOPING INEXPENSIVE SENSORS THAT CAN DETECT ROOF COLLAPSE FROM SNOW LOADS
… heavy snow accumulation. The recent updates in ASCE 7-22 have introduced reliability-targeted ground snow loads, leading to significant increases in design snow loads for certain areas. Despite this development, existing buildings in these regions designed under historical code requirements may …
-
Seismic Performance and Damage Risk of Modular CLT Housing Using Nonlinear Time History Analysis
… wall lateral-force resisting system included in ASCE 7-22 (2022) and were designed using prescriptive code-based methods to represent a feasible construction alternative. The analyses were conducted under the performance-based earthquake engineering framework. Ground motion data sets were …
-
Control de irregularidad por torsión en una edificación de 12 pisos mediante el reforzamiento con disipadores de energía fluido viscosos
… del dispositivo bajo los códigos FEMA 273, 274 y ASCE 7-10.
Page 1 of 6