Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"ASTM testing"”.

  1. In situ determination of strength and stiffness of structural lumber and composite products

    … lacking scientific basis.;Non-destructive testing (NDT) methods were investigated by this research for the possibility of evaluating modulus of rupture and modulus of elasticity of built-in wooden members. Methods included stress wave timing for dynamic MOE determination and screw …

    wvu Repository record for In situ determination of strength and stiffness of structural lumber and composite products (opens in a new tab)

  2. Assessing the limitations of oak in OSB

    … strength properties of the OSB panels. Standard ASTM testing procedures were used to determine the actual properties and statistical relationships between these variables identified.;Results of this research revealed that quality strands can be produced from oak. Investigation results also …

    wvu Repository record for Assessing the limitations of oak in OSB (opens in a new tab)

  3. Recycling veneer-mill residues into engineered products with improved torsional rigidity

    … methods of this new product. Using standard ASTM testing methods, an assessment into the physical and mechanical properties of the composite was performed.;The intended end use of these panels is as a web material in prefabricated I-joists. Composite I-joists were produced using flanges of …

    wvu Repository record for Recycling veneer-mill residues into engineered products with improved torsional rigidity (opens in a new tab)

  4. Determining End & Edge Distance Criteria for Tenon Joints in Timber Structures

    … developed from the standard American Society for Testing and Materials (ASTM) testing methods for steel bolds in wood members.</p> <p>End and edge distance tests were performed on ¾ inch and 1 inch diameter Red Oak and White Oak pegs. The test method simulated a tenon joint. Main member species …

    ut-knoxville Repository record for Determining End & Edge Distance Criteria for Tenon Joints in Timber Structures (opens in a new tab)

  5. Forming and processing of advanced fiber reinforced polymer composites

    … to the deformation process are evaluated using ASTM testing standards. Part II explores transparent composites as a lightweight and tough material that can improve current armor technology. Epoxy resin is formulated to match the refractive index of the fiber reinforcement for the fabrication of …

    must-thes Repository record for Forming and processing of advanced fiber reinforced polymer composites (opens in a new tab)

  6. Development of Carbon-Nanotube based Nanoforest Derivatives for Manufacturing and Testing of Polymer Nanocomposite Prepregs, Film Stacking, and Powder Processing

    … performance of the manufactured composite parts, ASTM Double Cantilevered Beam (DCB) samples, with and without Nanoforests, were manufactured and tested and found that, for example, the Mode I Opening Fracture Toughness improves between about 30% to 45% for the samples with CNT-based Nanoforests …

    hawaii Repository record for Development of Carbon-Nanotube based Nanoforest Derivatives for Manufacturing and Testing of Polymer Nanocomposite Prepregs, Film Stacking, and Powder Processing (opens in a new tab)

  7. Engineered design of fiber reinforced precast refractory material for taconite processing furnaces

    … these effects. This study used several standard ASTM testing procedures to test 65% alumina mullite based refractory samples with 304 and 406 grade stainless steel needles. Mechanical property data gathered was used to analyze performance. The study found that adding reinforcement does not …

    umn Repository record for Engineered design of fiber reinforced precast refractory material for taconite processing furnaces (opens in a new tab)

  8. Enhancing The Mechanical Properties Of Sla 3D-Printed Bio-Resin From Linseed Oil Using Cellulose And Lignin Biopolymers

    … blocks, which were all prepared according to the ASTM testing standard. The results indicate that reinforcement effects depend on both filler type and loading, and the benefits are not uniform across loading modes. Cellulose appears to provide the most consistent improvement in tensile …

    gsu Repository record for Enhancing The Mechanical Properties Of Sla 3D-Printed Bio-Resin From Linseed Oil Using Cellulose And Lignin Biopolymers (opens in a new tab)

  9. Forensic Characterization Of Dyes From Synthetic Textile Fibers Exposed To Outdoor And Laundering Effects By Ultra Performance Liquid Chromatography And Spectral Analysis

    … exposure to varying humidity and temperature at ASTM testing sites in Phoenix, AZ, and Miami, FL. Despite the loss of dye amounts with increasing environmental exposure, all dyes were detected even in the most weathered fabrics subjected to a year of outdoor exposure. To evaluate the changes in …

    south-carolina Repository record for Forensic Characterization Of Dyes From Synthetic Textile Fibers Exposed To Outdoor And Laundering Effects By Ultra Performance Liquid Chromatography And Spectral Analysis (opens in a new tab)

  10. Effects of copper on the metallurgical, mechanical, and fracture properties of 0.90 carbon rail steels, The

    … fatigue crack growth rate according to standard ASTM testing methodologies. The austenitic grain size, as determined by the McQuaid-Ehn method, suggested that copper does not influence the austenite grain growth characteristics in the temperature range of the test for the steels evaluated. Jominy …

    colo-mines Repository record for Effects of copper on the metallurgical, mechanical, and fracture properties of 0.90 carbon rail steels, The (opens in a new tab)

  11. Influence of soil structure and fluid physicochemical properties on surface erosion of cohesive soils

    … of Victoria in the absence of a relevant ASTM testing standard. Extensive element-scale experiments were conducted using the RSEA to examine the erodibility of cohesive soils with varying fine contents, water contents, and stress conditions. The effects of fluid physicochemical properties …

    uvic Repository record for Influence of soil structure and fluid physicochemical properties on surface erosion of cohesive soils (opens in a new tab)

  12. Effect of Dust Dispersion and Morphology on Dust Deflagration Hazard

    … injuries and property loss. Standards (ASTM, ISO etc.) mention a 20 L or a 1 m^3 apparatus to measure explosion parameters. These standards assume the dust particle size distribution remains unaltered post-dispersion in these apparatus. Recent studies have shown that dispersion in the …

    tamu Repository record for Effect of Dust Dispersion and Morphology on Dust Deflagration Hazard (opens in a new tab)

  13. Development of an Economical Ultra-High-Performance Concrete Mix Using Local Materials

    … selected for further evaluation through standard ASTM testing methods. The mixes developed in this research exhibited a minimum static flow of 10 inches. The presence of large quantities of cementitious materials can result in high shrinkage strains. The measured shrinkage strains for the UHPC mix …

    alabama Repository record for Development of an Economical Ultra-High-Performance Concrete Mix Using Local Materials (opens in a new tab)

  14. Investigation of ASTM E 238 Bearing Pin Properties for Various Aerospace Alloys

    … are often designed with numbers determined by testing in a lab, rather than by repeatedly building prototypes. These lab tests conform to testing specifications so that the numbers can be compared between manufacturers, suppliers, and lab technicians. One such specification is ASTM …

    calpoly Repository record for Investigation of ASTM E 238 Bearing Pin Properties for Various Aerospace Alloys (opens in a new tab)

  15. The Inference of the Mechanical Properties of Materials at Micro and Meso-Scale via the Micro-Bending Technique

    … solids like cement-based materials, indentation testing at the micro- and mesoscale encounters several shortcomings, which if not addressed by the experimentalist may bias the entire analysis. Among them are cracking and material densification under the indenter at high loads, the pile-up of the …

    houston Repository record for The Inference of the Mechanical Properties of Materials at Micro and Meso-Scale via the Micro-Bending Technique (opens in a new tab)

  16. An Alternate Approach to Determine the Explosibility of Dusts

    … tests specified by the American Society for Testing and Materials (ASTM) E 1226. This standard requires that a dust be uniformly dispersed into an enclosed 20-Liter (L) chamber forming a dust cloud; a 10,000 Joule (10 kJ) flame is subsequently forced through the dust cloud and the resulting …

    tamu Repository record for An Alternate Approach to Determine the Explosibility of Dusts (opens in a new tab)

  17. Valorization of Industrial Waste by CO2 supercritical curing: Toward Sustainable Building Materials and Circular Economy

    … and the samples were then tested with the ASTM testing in uniaxial compression. Finally, microstructure of a sample was studied, secondary electron imaging and electron dispersive x-ray spectroscopy, with the help of Scanning Electron Microscopy. The qualitative analysis for elemental …

    houston Repository record for Valorization of Industrial Waste by CO2 supercritical curing: Toward Sustainable Building Materials and Circular Economy (opens in a new tab)

  18. Material Characterization of Fiber-Reinforced Composite Materials Under Dynamic Loading Condition

    … for determination of these properties. A new testing procedure for measuring the tensile properties of laminated composites under low and moderate strain rates has been optimized. After studying the known properties of several different materials, a total of four types of fiberglass composites …

    unlv Repository record for Material Characterization of Fiber-Reinforced Composite Materials Under Dynamic Loading Condition (opens in a new tab) Download PDF for Material Characterization of Fiber-Reinforced Composite Materials Under Dynamic Loading Condition (opens in a new tab)

  19. Assessment of geopolymer material for the manufacture of a nuclear fuel core catcher

    … various geopolymer matrices when exposed to the ASTM standard; water absorptivity, sulphuric acid resistance and compressive strength testing protocols. From the results, geopolymeric superiority was established and subsequent recommendations were made for optimized geopolymer mixtures that are …

    nwu-za Repository record for Assessment of geopolymer material for the manufacture of a nuclear fuel core catcher (opens in a new tab)

  20. Experimental impact testing and analysis of composite fan cases

    … modes similar to that on a fan case in FBO testing, the gas gun experiment has to be carefully designed. To investigate the experimental procedure and data acquisition techniques for FBO test, a low cost, small spin rig was first constructed. FBO tests were carried out with the small rig. …

    msu Repository record for Experimental impact testing and analysis of composite fan cases (opens in a new tab)

Page 1 of 2