Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 65 for “"Abrasive Particles"”.
-
Investigating the Effects of SiC Abrasive Particles on Friction Element Welding
… however, can be accelerated with the use of abrasive particles. This study focuses on the effect of abrasive particles on the cleaning time and processing time of FEW. Silicon carbide abrasive particles have a high hardness and provide higher wear rates. The higher wear rates promote the …
-
An Investigation of Methods to Homogeneously Entrain and Suspend Abrasive Particles in a Low Pressure Dental Water Jet
… machine cutting tool. With the addition of abrasive particles and the improvement of high pressure pumps, the water jet stream is currently capable of cutting through metal, concrete, and composite materials. Water jet systems have been utilized at a wide range of different pressures. …
-
Evaluation of Shear Bond Strength of Zirconia to Resin Cement After Surface Treatment with Different Air Abrasion Zirconia Particles
… after surface modification using different abrasive particles, zirconia (beads and sharp edge particles) and aluminum oxide sharp edge in comparison to control (no surface treatment)...Result: A significant increase in shear bond strength in all surface treatment groups compared to control. …
-
Electro-kinetically enhanced nano-metric material removal
… look at the feasibility of using field activated abrasive particles to achieve material removal on a substrate. There are a few different goals for this project. The first goal is to prove through visualization that particle movement can be influenced and controlled by changes in electric field. …
-
Investigating the cleaning efficacy of novel oral care formulations.
… further analyse in detail the behaviour of the abrasive particles within toothpaste by analysing the microscopic tribological scratches caused by these abrasive particles to determine the mechanisms of their cleaning behaviour. This project uses quantitative micro-tribological investigative …
-
Development and application of smoothed particle hydrodynamics for studying surface erosion due to solid particle impacts
… erosion due to repetitive impacts of solid particles was numerically investigated by using smooth particle hydrodynamics (SPH). On the one hand, erosion is desirable and, hence, optimized in polishing processes such as abrasive flow machining. On the other hand, it is avoided due to its …
-
Understanding the role of tribology in maintaining oral hygiene
… teeth comes with a drawback. Toothpastes contain abrasive particles that have the potential to harm the tooth enamel resulting in wear. The aim of this project is to develop an understanding on the behaviour of abrasive particles in a toothpaste and how their impact and performance affect enamel …
-
Magnetic field assisted finishing (MAF) of conventionally and additively manufactured metals
… process contains a certain amount of magnetic particles along with abrasive particles (or magnetic abrasive particles) in a liquid medium, known as an MAF brush, filled in a machining gap between workpiece and magnetic poles subjected to a magnetic field. The relative motion between MAF brush …
-
Investigation of the Effects of Soot on Friction and Wear Characteristics of Polymers (Elastomers and Thermoplastics) Engine Components
… is vast research on nonferrous materials using abrasive particles; however; the effect of soot on nonferrous materials is still lacking. This study aims to investigate the effect of soot on nonferrous material such as polymers. Nonferrous materials are seeing increased use in engines so it is …
-
Analysis and Design of a Stationary Magnetic Abrasive Finishing System
Magnetic Abrasive Finishing (MAF) is a very effective technique used in precision surface finishing and polishing processes. It is defined as one of the advanced and nonconventional finishing processes, which is used to improve the characteristics of a finished surface. This technique utilizes a …
-
Experimental investigation and wear simulation of three-body abrasion
… factors are considered such as kinematics of abrasive particles, contact stiffness of the particle layer, friction characteristics, and wear factors. The experiments to study kinematics of particle layers are performed on a new observation tester. To define the contact stiffness of abrasive …
-
Magnio fluorido lazerinės pažaidos slenksčio femtosekundiniais impulsais priklausomybės nuo paviršiaus šiurkštumo tyrimas /
… formed during final polishing and filled with abrasive particles, are more predominant in specimen with sferical surfaces. Surface roughness dependence of laser induced damage is evaluated. Damage threshold was found to be 2 times greater for components with flat surfaces than with spherical.
-
Pole tip recession in linear tape systems
… phase results in the formation of three-body abrasive particles that were swept across the tape head, and gave rise to three-body abrasive wear, particularly in the pole regions. Hence, PTR and subsequent which signal loss and error growth. The lower contact pressure of the LTO system …
-
A STUDY ON THE DEVELOPMENT OF MAGNETICALLY DRIVEN INTERNAL FINISHING TECHNIQUE
… breaks the shackles of the conventional magnetic abrasive particles and brings forth to the development of more novel functional polishing tools. Besides, the theoretical modelling driven by the physical mechanism has laid down a framework for the contact pressure calculation and polished profile …
-
The Efficacy of Micro-Abrasive Cleaning for Historic Brick: Investigating Graffiti Removal and Surface Changes
… alteration as part of the removal process. Micro-abrasive cleaning, which employs fine abrasive particles at low pressures to wear away the paint, offers a controlled alternative to other methods, reducing direct exposure to harsh chemicals, discoloration, and excessive material loss. However, its …
-
A study of annular slurry jet for abrasive waterjet cutting
… performance of an annualr slurry jet nozzle for abrasive waterjet cutting. This nozzle has been invented by Avraham. Harnoy, Department of Mechanical Engineering, NJIT and presented to the patent committee of NJIT in May 1990. This study includes design and development of prototyes and testing of …
-
Correlation between particle velocities and conditions of abrasive waterjet formation
The velocities of water and abrasive particles in abrasive waterjet(AWJ) were measured by the use of Laser Transit Anemometer(LTA). A setup for the velocity measurement was constructed and a statistical technique was used to improve the accuracy of the velocity determination. A comparison of the …
-
Microdermabrasion for transdermal drug delivery
… that removes the stratum by bombarding it with abrasive particles under vacuum. The aims of this thesis are focused on optimizing the microdermabrasion conditions that will selectively remove stratum corneum, evaluating the transport of different sized molecules through abraded skin in vitro, …
-
Improving the durability and performance of hollow fibre membranes with nanocomposite and inorganic/organic hybrid materials
… over time, especially in the presence of abrasive particles in seawater and other challenging water sources. Recent work in the literature has shown that the physical strength, flux and antifouling properties of membranes can be improved by incorporation of nanoparticles. In this work, …
Page 1 of 4