Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 152 for “"Accelerated Corrosion"”.

  1. Investigation of the accelerated corrosion of cupro-nickel piping

    The accelerated corrosion (erosion) of 70/30 cupro-nickel alloy was investigated as a function of environment using a laboratory recirculation loop. The environments utilized were unpolluted artificial sea water and artificial sea water polluted with sulfides (Na2S) and two different levels of …

    nps Repository record for Investigation of the accelerated corrosion of cupro-nickel piping (opens in a new tab)

  2. CFRP repair of concrete beams aged by accelerated corrosion

    … durability was studied by inducing additional corrosion after repair. In Part II the performance of three unique FRP anchorage schemes were compared under both static and cyclic loading. Scheme 1 consisted of only flexural FRP without anchors, scheme 2 consisted of only two strategically placed …

    wvu Repository record for CFRP repair of concrete beams aged by accelerated corrosion (opens in a new tab)

  3. Flow Accelerated Corrosion Experience at Comanche Peak Steam Electric Station

    Flow accelerated corrosion (FAC) is a major concern in the power industry as it causes thinning of the pipes by the dissolution of the passive oxide layer formed on the pipe surface. Present research deals with comparing the protection offered by the magnetite (Fe3O4) versus maghemite (γ-Fe2O3) …

    unt Repository record for Flow Accelerated Corrosion Experience at Comanche Peak Steam Electric Station (opens in a new tab)

  4. Accelerated Corrosion Test with Operation Simulation of All-Aluminum Microchannel Heat Exchangers

    … exchangers. Furthermore, ASHRAE members and the corrosion community will find value in a defined corrosion system and corrosion test procedure. The information gained through past research has progressed assessment of material performance; however, the methods improperly simulate and expedite …

    unt Repository record for Accelerated Corrosion Test with Operation Simulation of All-Aluminum Microchannel Heat Exchangers (opens in a new tab)

  5. Flow accelerated corrosion of the heat exchanger carbon steel tubing in air cooled condensers

    … both fossil and combined cycle plants. FAC (flow accelerated corrosion) has been described as the degradation or dissolution of the surface layers of low carbon steel at a relatively low temperature and pressure. FAC can cause serious damage in thin-walled heat exchange tubing in air cooled …

    colo-mines Repository record for Flow accelerated corrosion of the heat exchanger carbon steel tubing in air cooled condensers (opens in a new tab)

  6. Application of accelerated corrosion tests to predict the service life of 2024-T3 aluminum alloy

    … of this research was to quantify the effects of corrosion, based on grain direction, mass loss and pit-depths, on the static strength and fatigue life of 2024-T3 aluminum alloy. In order to achieve this objective, the test specimens were cut from flat sheets of 2024-T3 aluminum alloy and were …

    ttu Repository record for Application of accelerated corrosion tests to predict the service life of 2024-T3 aluminum alloy (opens in a new tab)

  7. Development of accelerated corrosion tests involving alternative exposure to hostile gases, neutral salt spray and drying

    In this thesis, a well proven corrosion testing method developed by SP Technical Research Institute of Sweden (SP) ISO 21207 method B is modified in order to increase even further the acceleration factor of corrosion attacks by 40%. The method combines humidity cycling with conditioning, drying as …

    chalmers Repository record for Development of accelerated corrosion tests involving alternative exposure to hostile gases, neutral salt spray and drying (opens in a new tab)

  8. High temperature oxidation and NaCl-induced accelerated corrosion of hot-dip aluminized 9Cr-1Mo and 310 stainless steel

    The behaviors of high temperature corrosion on hot-dip aluminized on 9Cr-1Mo and 310 stainless steels when catalyzed by NaCl and cyclic heating environment were studied experimentally. The corrosion behavior and morphological development were investigated by weight gain kinetics, metallographs, …

    tamu Repository record for High temperature oxidation and NaCl-induced accelerated corrosion of hot-dip aluminized 9Cr-1Mo and 310 stainless steel (opens in a new tab)

  9. FLOW ACCELERATED CORROSION IN SINGLE AND DUAL S-SHAPE BENDS UNDER SINGLE AND TWO PHASE ANNULAR FLOW CONDITIONS

    <p>Flow Accelerated Corrosion (<em>FAC</em>) is defined as a flow enhanced mass transfer phenomenon that results in pipe wall thinning of the piping system and results in abrupt failure in some cases. <em>FAC</em> is controlled by the transport of corrosion species from the wall to the bulk fluid …

    mcmaster Repository record for FLOW ACCELERATED CORROSION IN SINGLE AND DUAL S-SHAPE BENDS UNDER SINGLE AND TWO PHASE ANNULAR FLOW CONDITIONS (opens in a new tab)

  10. Corrosion of Austenitic Stainless Steel

    This thesis work focuses on the corrosion behaviour of austenitic stainless steel welds in chloride containing environments. The initial aim was to develop a new method for corrosion testing of welded austenitic stainless steel. The motivation for such work was that previous results indicated that …

    chalmers Repository record for Corrosion of Austenitic Stainless Steel (opens in a new tab)

  11. Development of an abiotic laboratory screening test for microbially influenced corrosion

    … (ALST) was developed that replicated the major corrosion-causing characteristics of several natural biotic environments. The natural biotic environments replicated were a Delaware Bay seawater site, an Arizona well-water system and a Tennessee River fresh-water system. The ALST was designed to …

    ut-knoxville Repository record for Development of an abiotic laboratory screening test for microbially influenced corrosion (opens in a new tab)

  12. Corrosion of Aluminum Alloys-Polymer Matrix Composite Interfaces

    The accelerated corrosion of several carbon-fiber (CFRP) and E-glass/epoxy (GFRP) composite laminated aluminum alloys [i.e., Al 1100-H14, Al 5456-H116 (non-sensitized), Al 5456-H116 (sensitized), & Al 7075-T6] was studied to characterize the interfacial corrosion between the composite and aluminum …

    hawaii Repository record for Corrosion of Aluminum Alloys-Polymer Matrix Composite Interfaces (opens in a new tab)

  13. Inductively Coupled Corrosion Potential Sensor for Remote Passive Monitoring of New and Existing Civil Structures

    … process of an inductively coupled coil corrosion potential sensor for long-term civil structure health monitoring remotely. This is of growing interest for decreasing the maintenance cost, reducing the deterioration significantly and increasing the safety. The thesis is organized …

    manitoba Repository record for Inductively Coupled Corrosion Potential Sensor for Remote Passive Monitoring of New and Existing Civil Structures (opens in a new tab)

  14. Hydrodynamic drag force measurement of a functionalized surface exhibiting superhydrophobic properties

    … will also be tested through the use of an accelerated corrosion fog chamber using both treated and untreated aluminum samples. During complete submersion water channel testing, the velocity of the water was varied to yield a range of Reynolds numbers between 20,000 and 70,000 with respect …

    nps Repository record for Hydrodynamic drag force measurement of a functionalized surface exhibiting superhydrophobic properties (opens in a new tab)

  15. Active and passive acoustic emission-based detection of corrosion damage in steel rods and tendons

    … aims: first, using acoustic emission (AE) for corrosion damage monitoring of steel tendons, and second, using AE for corrosion damage monitoring of steel grounding rods. First, the Fuzzy c-means clustering algorithm was employed to differentiate AEs of breaking wires of steel tendons from …

    manitoba Repository record for Active and passive acoustic emission-based detection of corrosion damage in steel rods and tendons (opens in a new tab)

  16. Corrosion Behavior of ASTM A1010 Stainless Steel for Applications in Bridge Components

    … of this research was the investigation of the corrosion behavior of a low chromium-content stainless steel, ASTM A1010, for use in steel bridge members. This stainless steel has been marketed as a potential replacement for conventional structural steels for bridges located in highly-corrosive …

    vt Repository record for Corrosion Behavior of ASTM A1010 Stainless Steel for Applications in Bridge Components (opens in a new tab)

  17. Damage of concrete with epoxy coated reinforcement due to corrosion, freeze-thaw and fatigue with application to bridge decks

    … of reinforced concrete bridge decks due to corrosion of the steel bars is a common problem. Epoxy coated reinforcement (ECR) is known to perform better than plain (black) steel, but the appropriate maintenance schedule for ECR bridge decks is not well established. The goal of this project …

    msu Repository record for Damage of concrete with epoxy coated reinforcement due to corrosion, freeze-thaw and fatigue with application to bridge decks (opens in a new tab)

  18. Residual strength of corroded reinforced concrete beams.

    Currently, much research is focused on the corrosion of reinforcement in concrete members. However, none addresses the problems associated with the residual strength of reinforced concrete beams exhibiting both main and shear reinforcement corrosion simultaneously. The aim of this research, …

    sheffield-hallam Download PDF for Residual strength of corroded reinforced concrete beams. (opens in a new tab)

  19. Residual Engineering Properties of Corroded Conventional Steel, High Chromium Steel and Stainless Steel Reinforcing bars in Concrete

    Corrosion can be a major concern in term of durability and the safety of the reinforced concrete structures. However, there are no relations specified by codes and standards to evaluate the reduction in the engineering properties of corroded steel rebar. This work presents the findings of the …

    houston Repository record for Residual Engineering Properties of Corroded Conventional Steel, High Chromium Steel and Stainless Steel Reinforcing bars in Concrete (opens in a new tab)

Page 1 of 8