Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 52 for “"Acoustic surface wave devices"”.
-
A spread spectrum communication technique
… Golay complimentary sequences implemented with acoustic surface wave devices was utilized to achieve this processing. The resultant device was an audio transceiver MODEM in which a specially coded form of pulse code modulation (PCM) was applied to a voice signal to enable application of the …
-
A spread spectrum communication system.
… down-link. Spread spectrum technology employing acoustic surface wave devices and Golay complementary code sequences are utilized. Bandwidth reduction of the video data to a data rate of 200 kilobits per second is assumed. A discussion of the need for such a system and the qualities that a …
-
Modelling and analysis of wirelessly interrogated SAW based micropumps for drug delivery applications.
… the ease of control of implantable biological devices would be greatly improved by incorporation of wireless and secure actuator mechanism with no battery attached with the device. Therefore, in this thesis, several significant contributions to address the above highlighted issues are presented …
-
The interaction of surface acoustic waves with arrays of thin metal dots
<p>One class of Surface Acoustic Wave (SAW) devices employs reflecting arrays to determine device characteristics. Dots of metal film and grooves have been used as reflectors; reflection is caused by the mechanical discontinuity. This research project is a study of an alternative reflector, the …
-
Analysis and synthesis of surface acoustic wave filters using an admittance model / by N.C.V. Krishnamacharyulu
viii, 178 leaves : ill., graphs ; 31 cm.
-
Surface acoustic wave probes for chemical analysis
Surface Acoustic Wave delay lines have been used as probes for chemical analysis. The interaction between matter adjacent to the SAW device surface and the propagating Raleigh wave caused measurable changes in the amplitude, phase and resonant frequency of the wave. The effectiveness of various …
-
Improvement of an acoustic sounder device used to measure atmospheric turbulence
… role in the propagation of electromagnetic waves through the atmosphere because it broadens and distorts the optical beam. A variety of optical, thermal, and acoustic instruments are used to detect the atmospheric turbulence and an acoustic echosounder has proven to be a valuable tool to …
-
Development of a compact sound source for the active control of turbofan inlet noise
… curved aluminum panel and a pair of collocated, surface-bonded piezoceramic actuators, was developed with the objective of employing it as a secondary sound source in the active control of turbofan blade interaction inlet noise. The sound source was fitted in an experimental duct representative …
-
Development and evaluation of an acylating agent detector using surface acoustic wave devices
… to specific vapors is a highly desirable goal. Surface Acoustic Wave (SAW) devices have been used for chemical analysis since 1978. While sensitive to mass changes occurring on their surfaces, they are not selective to the mass they will detect. Their use as chemical sensors requires the …
-
Fundamental studies of analyte/film interactions and their applications for chemical sensor devices
Thesis (Ph. D.)--Michigan State University. Department of Chemistry, 1995
-
Fundamental studies of chromatographic stationary phases as selective coatings for mass based chemical sensors
Thesis (M.S.)--Michigan State University. Department of Chemistry, 1994
-
Dynamic behavior of ultra-thin polymer films deposited on surface acoustic wave(SAW) devices: A feasibility study of saw applications
The main objective of this research effort was the investigation of relevant applications that a cutting edge technology afforded. While the work did not attempt to delve into mathematical interpretation of SAW device responses, it did seek to evaluate the usefulness of the SAW technology from an …
-
Investigation of a compact acoustic source array for the active control of aircraft engine fan noise
An array of small, lightweight acoustic sources was investigated to determine how such an arrangement of sources would acoustically interact with a duct similar to that of a turbofan engine inlet. The sources were cylindrically curved aluminum panels excited in vibration by the application of a …
-
The deposition of AlN thin films, their characterization and the fabrication of surface acoustic wave devices
Thesis (M.S.)--Michigan State University. Department of Electrical and Computer Engineering, 2007
-
Design of a Monitoring System for a Plasma Cleaning Machine
… is the most effective dry process to remove surface contaminates from a SAW (Surface Acoustical Wave) device. Consistent gas pressures, flows, and good electrical connections between the chamber shelves are necessary for the process to function predictably. In addition, operation of the …
-
Three-Phase Unidirectional Surface Acoustic Wave Transducer Model and Computer Aided Design Implementation
This thesis presents an introduction into surface acoustics wave (SAW) unidirectional transducer (UDT) technologies and identifies advantages and disadvantages of various approaches. A complete model of the three-phase unidirectional structure is presented for the purpose of design analysis. This …
-
Fabrication of two-port resonators using different types of metal electrodes and substrates
Master of Science (M.S.)
-
4.74 GHz Harmonically Operated SAW Device for Sensing Applications and Interrogation System
Surface acoustic wave (SAW) devices have provided solutions to many sensor applications. With the increasing use of the electromagnetic spectrum, the adoption of higher frequencies for new developments is becoming a necessity. SAW devices represent a solution for advancing many emerging sensor's …
Page 1 of 3