Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 86 for “"Activated sludge systems"”.
-
Advanced process control in activated sludge systems
… advanced process control methods applying in two activated sludge systems were investigated. Both pilot-scale systems were operated under intermittently aerated and fed (IAF) conditions. In the first experimental period, a sedimentation tank was used in order to separate the activated sludge with …
-
Flocculation and Clarification in Activated Sludge Systems
Made available in DSpace on 2014-12-08T23:56:43Z (GMT). No. of bitstreams: 1 6612407.pdf: 5135179 bytes, checksum: 7baa621e857e38bc86c867c88f6c0f5c (MD5) Previous issue date: 1966
-
Effects of propylene glycol on nitrification in activated sludge systems
… sequencing batch reactors seeded with SAR activated sludge and fed with SAR primary effluent. Two loading regimes were evaluated: continuous loading (0, 6, 10, and 20 mg/L for 24 days) and spike loading (0, 25, 50, and 100 mg/L for 24 hours). Continuous PG loading at 20 mg/L caused …
-
Biodegradation of selected organic nitrogen compounds in activated sludge systems
… OF MISSOURI-COLUMBIA AT AUTHOR'S REQUEST.] Activated sludge systems are commonly used to remove organic matter and nutrients from wastewater. They are also used to remove synthetic organic compounds from industrial activities. In this study, two identical activated sludge-based continuous …
-
Utilization of fixed film media in BNR activated sludge systems
… and are referred to as the Integrated Fixed Film Activated Sludge (IFAS) systems. A fourth treatment train (Control train) was operated without any fixed film media. All experiments in this research were performed using domestic wastewater from Blacksburg, Virginia, and the Virginia Tech campus. …
-
Modelling carbon oxidation in pulp mill activated sludge systems : calibration of ASM3
Activated Sludge Model N°3 (ASM3) was chosen as a basis to model an activated sludge system treating effluents from a mechanical pulp and paper mill. The wastewater treatment plant (WWTP) selected, located in Port Alberni, consists of a pH adjuster, primary clarifier (not modeled), five complete …
-
Modelling carbon oxidation in pulp mill activated sludge systems : determining model parameters
… municipal wastewater treatment facilities, the Activated Sludge Model No. 1 is often used. This model has also served as the basis for the development of many other models to determine the behavior of activated sludge systems treating municipal wastewater, and has also been extended to the …
-
Process Parameters for Separate-Stage Nitrification Activated Sludge Systems in Cold Environments
… to insure optimum performance of the air activated sludge nitrification system.
-
COD Balances in Biological Nutrient (Nitrogen and Phosphorus) Removal Activated Sludge Systems
… nutrient (nitrogen and phosphorus) removal (BNR) activated sludge systems. For non-BNR systems, accurate COD balances are consistently attainable from experimental measurements. That is, influent COD can be accounted for in the effluent flow, waste sludge stream, and mass of oxygen utilised for …
-
Factors influencing the biodegradation kinetics of toxic organic compounds in activated sludge systems
… kinetics of toxic organic compounds in activated sludge treatment systems.
-
Filamentous Foaming in Activated Sludge Systems: A Study Combining Molecular and Engineering Approaches
"Foaming in activated sludge systems is characterized by the formation of a thick, chocolate brown-colored scum that floats on the surface of aeration basins and secondary clarifiers. These viscous foams cause various operational problems, and have been associated with the presence of filamentous …
-
Nitrification bioaugmentation in mainstream flocculent activated sludge systems using sidestream aerobic granular sludge
Increased nitrification capacity in flocculent activated sludge wastewater treatment systems may be required to meet lower effluent ammonia-nitrogen (NH3-N) concentration limits, to handle higher influent flows, and/or for conversion to nitrogen removal. A novel approach to increase nitrification …
-
Dynamic Mechanistic Model for Biological Nutrient (Nitrogen and Phosphorus) Removal Activated Sludge Systems
… nutrient (nitrogen and phosphorus) removal activated sludge systems treating municipal wastewater. The IAWPRC (ASM1) model for non-polyP heterotrophic and autotrophic organisms (Henze et al., 1987a,b) and the Wentzel et al. (1989b) model for polyP organisms were merged to form a general …
-
The use of simultaneous chemical precipitation in modified activated sludge systems exhibiting biological enhanced phosphate removal
… biological enhanced phosphate removal (BEPR) in activated sludge systems for treating wastewater. However, BEPR tends to be sensitive and subject to many fluctuations, making it difficult to achieve full compliance with discharge standards. Simultaneous chemical addition in the activated sludge …
-
Factors affecting the growth of Nostocoida limicola II and other filamentous microorganisms in activated sludge systems
… filamentous microorganisms in the bulking activated sludge at the Hoechst Celanese wastewater treatment plant. First, futile attempts were made to isolate the filamentous bacterium, <i>Nostocoida limicola II</i>, from activated sludge for purposes of its characterization. Chemostat and …
Page 1 of 5