Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 18 of 18 for “"Activation Overpotential"”.
-
Degradation behavior of non-infiltrated and GDC-infiltrated solid oxide cells under long-term operation
… potential into open circuit potential and other overpotentials which include ohmic, activation and concentration. Among the overpotentials, the activation overpotential can be calculated using the Butler-Volmer equation, which shows the relationship between activation overpotential and the …
-
Transport Phenomena in Cathode Catalyst Layer of PEM Fuel Cells
… optimization and manufacturing cost. The activation losses, expensive platinum catalyst, and water flooding phenomenon are the key factors currently hindering commercialization of PEM fuel cells. These factors are associated with the cathode catalyst layer (CCL), which is about ten …
-
A three-dimensional computational model of PEM fuel cell with serpentine gas channels
… which allows for the calculation of the local activation overpotentials. Hence, the accurate prediction of the local current density distribution is made possible through the coupling of activation overpotential distribution and reactant concentration distribution. The simulation results also …
-
Chemical and electrochemical studies of Leclanché cells
… the anodic zinc dissolution and no significant activation overpotential was observed for the manganese dioxide electrode. During these discharges in Leclanché electrolyte, the NH4CI concentration decreased at the zinc electrode interface reducing the activation overpotential and increasing the …
-
Dynamic behavior and degradation of a fuel cell system
… transfer currents. The successive change of the activation overpotential is calculated by using the charging currents and the element law for an ideal linear capacitor, and then the transient voltage response to a step load change is shown in results.
-
Anodic oxygen-transfer electrocatalysis at pure and modified lead dioxide electrodes in acidic media
… was found to be accompanied by a decrease in the overpotential for anodic evolution of O(,2). These kinetic properties also were found to be correlated with an increasing preferred orientation of the electrodeposited mixed oxide in which the (020) plane of the slightly distorted rutile structure …
-
The anodic dissolution of nickel in acid sulphate solutions containing organic sulphur compounds
… to the C=S group, whilst the lowering of the activation overpotential caused by low concentrations of some thiocompounds, has been shown to be caused by sulphide ions resulting from the hydrolysis of these compounds. There are some indications that the formation of nickel oxides on the …
-
Understanding the electrochemistry and reaction mechanisms of solid-state sulfides with application to the lithium-sulfur battery system
… additionally identified the appearance of the activation overpotential when charging Li₂S to be associated with the generation of soluble polysulfide species. Finally, these results are used to develop a model for the rational design of Li-S cathodes by tailoring the conductive pore structure …
-
Modeling issues for solid oxide fuel cells operating with coal syngas
… the effect of temperature, fuel composition, and activation overpotential parameters for carbon monoxide oxidation was also performed. It was found that the increase of cell performance with temperature increase was caused by a decrease in all the overpotentials. The cell performance also …
-
Membranes and electrodes for vanadium redox flow batteries
… and (3) developed two approaches to reduce the activation overpotential of the carbon paper electrodes in "zero-gap" cell architecture for high power density operation. The main results include: (1) The chemical and mechanical stability, vanadium permeation rates and cell performance of Fumasep …
-
Distributed computing & solid oxide fuel cell modelling
… in the anode electronic conductivity and cathode activation overpotential. Modelling predicted that the addition of a metallic mesh inside the cell would increase the output voltage by 28 mV and an experiment with two samples and two controls showed a gain of 30 mV. Simulation of the cathode …
-
Multiscale Microstructure Modeling and Design of Electrochemomechanics in Lithium-Ion Batteries
… drop at high C rate. It is obtained that the activation overpotential is the major contribution to the total polarization, and it is about 4-5 times larger than the concentration polarization. It is obtained that the stress generation inside lithium ion battery is highly dependent on …
-
Improving bio-electricity production and waste stabilization in Microbial Fuel Cells
… system experiment, the consequent lower activation overpotential and higher oxygen reduction potential. The system demonstrates that within 72 h, 93±4% of the zinc ions are removed from the feed phase. A further study, with continuously operated cathode/feed chamber (100 mg Zn2+ l-1), …
-
Heteroatom Doped Carbon Electrode Materials for Redox Flow Battery Application
… investigation reveals an increase in the activation overpotential at both the positive and negative electrodes originating from significant changes in the composition of oxygen functional groups at the electrode surface after degradation. In order to improve the electrocatalytic activity …
-
Catalyst Design and Operating Configurations for Overpotential Reduction in Anion-Exchange Membrane Water Electrolysers
… at low cell voltages remains challenging due to activation, ohmic, and mass transport overpotentials. This thesis addresses these challenges through integrated catalyst design and device-level analysis strategies aimed at minimizing overpotential contributions in AEMWE systems. The first part of …
-
Electricity generation with organic matter and ammonium removal from swine wastewater via microbial fuel cells
… operational mode. The results showed that the activation overpotential of the anode substantial reduced during the anode enrichment process, which was a result of increased exchange current density due to the increased biocatalyst. It was also found that electricity generation reduced sludge …
-
Development of Functional Binders and Li2S@Carbon Nanocomposites for High-Performance Lithium Sulfide Batteries
… surface layers that cause a large first-charge overpotential; its high melting point (~938 °C), which prevents melt infiltration into carbon frameworks; sluggish redox kinetics; severe polysulfide dissolution; poor conductivity. Addressing these challenges requires integrated advances in binder …