Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"Active Balun"”.

  1. Linearized 4-7 GHz LC Tunable Filter with Active Balun in 0.18um SiGe BiCMOS

    … the microwave regime. A balanced-to-unbalanced (balun) transformation circuit is required to support the differential nature of a tunable LC filter. An active balun that also performs as a transconductor to drive the LC tank would relax the design requirement for the LNA and remove a passive …

    vt Repository record for Linearized 4-7 GHz LC Tunable Filter with Active Balun in 0.18um SiGe BiCMOS (opens in a new tab)

  2. Design of mm-wave Front-end for Multiantenna Communication Systems

    … cascode LNA cascaded with a differential pair active balun is proposed. The LNA has a reflection coefficient of less than -20 dB, an available gain of more than 17 dB, a noise figure of less than 2.4 dB, an IIP3 of 10 dBm and a power consumption of 12 mW. The active balun has a maximum phase …

    chalmers Repository record for Design of mm-wave Front-end for Multiantenna Communication Systems (opens in a new tab)

  3. A Millimeter-Wave Coexistent RFIC Receiver Architecture in 0.18-µm SiGe BiCMOS for Radar and Communication Systems

    … A new class of broadband low power consumption active balun-LNA consisting of two common emitters amplifiers mutually coupled thru an AC stacked transformer for power saving and gain boosting. The active balun-LNA exhibits new high linearity technique using a constant gm cell transconductance …

    tamu Repository record for A Millimeter-Wave Coexistent RFIC Receiver Architecture in 0.18-µm SiGe BiCMOS for Radar and Communication Systems (opens in a new tab)

  4. Design of Low-Voltage and Low-Distortion CMOS RF Integrated Circuits Using Volterra Analysis

    … circuit is a low-voltage low-noise wideband active balun. The linearity analysis for the active balun circuit is also analyzed using Volterra series. The design consideration involving noise cancellation and distortion cancellation is discussed through this analysis. A simple distortion …

    queens Repository record for Design of Low-Voltage and Low-Distortion CMOS RF Integrated Circuits Using Volterra Analysis (opens in a new tab)

  5. Wideband active MMIC baluns -concepts and design

    … way of creating these is through the use of a balun, which converts an unbalanced signal into a balanced one. Active baluns are compact, wavelength independent circuits that can provide signal gain and a wide operational bandwidth. This work investigates three active balun designs operating …

    chalmers Repository record for Wideband active MMIC baluns -concepts and design (opens in a new tab)

  6. MILLIMETER WAVE TRANSCEIVER FRONTEND CIRCUITS IN ADVANCED SIGE TECHNOLOGY WITH CONSIDERATIONS FOR ON-CHIP PASSIVE COMPONENT DESIGN AND SIMULATLION

    … architecture such as low noise amplifier (LNA), active balun, and mixer. The design methodology is not limited to the above circuits. It can be applied to many other situations where operating frequency is high and the dimensions of passive structures are comparable to signal wavelength. A …

    cornell Repository record for MILLIMETER WAVE TRANSCEIVER FRONTEND CIRCUITS IN ADVANCED SIGE TECHNOLOGY WITH CONSIDERATIONS FOR ON-CHIP PASSIVE COMPONENT DESIGN AND SIMULATLION (opens in a new tab)

  7. MICRO AND MILLIMETER WAVE CIRCUIT DESIGN IN SILICON WITH CONSIDERATIONS FOR NOISE REDUCTION AND ON-CHIP PASSIVE ELEMENTS

    … such as a direct down converter featuring an active balun at 94 GHz, and radio frequency identification (RFID) tags with an active transmitter at 24 GHz and 60 GHz. The methodology is not limited to the above circuits. It can be applied to a myriad of other circuits where the operating …

    cornell Repository record for MICRO AND MILLIMETER WAVE CIRCUIT DESIGN IN SILICON WITH CONSIDERATIONS FOR NOISE REDUCTION AND ON-CHIP PASSIVE ELEMENTS (opens in a new tab)

  8. Phase Generation and Manipulation in CMOS Integrated Circuits

    … number of standard wireless systems. A new novel balun is proposed that achieves wideband performance through the use of an external compensating capacitor to counter the effects of parasitic capacitances that reduce its effective bandwidth. An input stage common gate amplifier is then used to …

    queens Repository record for Phase Generation and Manipulation in CMOS Integrated Circuits (opens in a new tab)

  9. Radio frequency direct-digital QPSK modulators in CMOS technology

    … (RC-CR) phase shifter followed by two 180° active baluns. One signal from the in-phase components and another from the quadrature-phase components are later selected by two PTL circuits according to the in-phase (I) and quadrature-phase (Q) digital data respectively. Finally the chosen …

    queens Repository record for Radio frequency direct-digital QPSK modulators in CMOS technology (opens in a new tab)

  10. High-speed optoelectronic links for datacenters

    … cost and parasitics. An RX with noise-canceling active balun is presented. The RX works as part of the APD bias stabilization loop. The integrated O/E-RX achieves a measured sensitivity of -18.8dBm at 0.57pJ/b. A high-sensitivity, high-speed, and low-power RX demands solutions to the …

    ubc Repository record for High-speed optoelectronic links for datacenters (opens in a new tab) Download PDF for High-speed optoelectronic links for datacenters (opens in a new tab)

  11. Broadband RF Front-End Design for Multi-Standard Receiver with High-Linearity and Low-Noise Techniques

    … and its various building blocks (LNA, Active Balun-LNA, Mixer, and trans-impedance amplifier) for multi-standard applications. In the design of the mobile DTV tuner, a direct-conversion receiver architecture is adopted achieving low power, low cost, and high dynamic-range for DVB-H …

    tamu Repository record for Broadband RF Front-End Design for Multi-Standard Receiver with High-Linearity and Low-Noise Techniques (opens in a new tab)

  12. Millimeter-Wave Concurrent Dual-Band BiCMOS RFIC Transmitter for Radar and Communication Systems

    … communication systems. A new type of low-power active balun consisting of a common emitter amplifier with degenerative inductor and a common collector amplifier is proposed. The parasitic neutralization and compensation techniques are used to keep the balun well balanced at very high frequencies …

    tamu Repository record for Millimeter-Wave Concurrent Dual-Band BiCMOS RFIC Transmitter for Radar and Communication Systems (opens in a new tab)

  13. Design of wideband CMOS building block circuits for receivers from 0.5 up to 4 GHz

    … obtained thanks to the proposed low imbalance active balun. Both LNVGAs have been designed in 130 nm CMOS for a 1.2 V supply. The final design is a 40 nm CMOS wideband high-IF receiver. Due to the evolution of CMOS technology, receivers with a higher IF and without external components are …

    brazil-ufrgs Repository record for Design of wideband CMOS building block circuits for receivers from 0.5 up to 4 GHz (opens in a new tab)

  14. Compact and Wideband MMIC Phase Shifters Using Tunable Active Inductor Loaded All-Pass Networks

    … shifter implementation that utilizes tunable active differential inductors within all-pass networks. The inductor tuning is used to achieve phase shifts up to 180⁰. A switchable active balanced to unbalanced transition circuit (balun) is included in front of the all-pass network to complement …

    usf Repository record for Compact and Wideband MMIC Phase Shifters Using Tunable Active Inductor Loaded All-Pass Networks (opens in a new tab)