Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 58 for “"Actuation force"”.

  1. Microengineered silicon beam switch for fiber optics

    … port to one of 3 selected optical ports. The actuation force is created by a vertical-drive armature measuring 0.5x2.7 mm<sup>2</sup> mechanically tethered to the input optical fiber. A force of 2.33 mN is obtained from the linear acturator when the vertical stator armature gap is one micron …

    njit Repository record for Microengineered silicon beam switch for fiber optics (opens in a new tab)

  2. Droplet-based Mechanical Actuator Utilizing Electrowetting Effect

    … key design parameters such as the load capacity, actuation force, positioning repeatability, and reliability for droplet-based electrowetting actuators. Due to the fact that surface tension dominates gravity at both the mesoscale and microscale, droplet-based actuators can provide adequate force …

    usf Repository record for Droplet-based Mechanical Actuator Utilizing Electrowetting Effect (opens in a new tab)

  3. Analysis and Wind Tunnel Testing of a Superelastic Slat-Cove Filler for Airframe Noise Reduction

    … of the optimization was to minimize the actuation force needed to retract the slat and SCF. A monolithic SMA SCF was found to minimize the actuation force while satisfying constraints, which agreed with findings from prototype testing on the bench-top apparatus. The success of the design …

    tamu Repository record for Analysis and Wind Tunnel Testing of a Superelastic Slat-Cove Filler for Airframe Noise Reduction (opens in a new tab)

  4. Characterisation of Aerosols Generated by Pressurised Metered Dose Inhalers

    … it was thought that<br/>the variations in actuation forces of pMDIs and temperatures at which they are<br/>used might contribute to their low consistency.<br/>A one-dimensional Matlab computational model was developed in order to calcu-<br/>late spray properties at the exit of the device …

    kings Repository record for Characterisation of Aerosols Generated by Pressurised Metered Dose Inhalers (opens in a new tab) Download PDF for Characterisation of Aerosols Generated by Pressurised Metered Dose Inhalers (opens in a new tab)

  5. Degradation of NiTi springs through electronic actuation

    … in springs, the long-term reliability of these actuation forces has rarely been investigated. As SMAs are non-ferrous, it can be deduced that some structural degradation occurs %in the NiTi alloy springs due to fatigue. Due to SMA NiTi's high electrical resistance, actuation is most convenient …

    reykjavik Repository record for Degradation of NiTi springs through electronic actuation (opens in a new tab)

  6. Study of droplet splitting in an electrowetting based digital microfluidic system

    … (EWOD) based droplet actuation. This thesis demonstrates that not only the EWOD actuation is a self-feedback system - implying that the actuation force depends on the position of the droplet, but also the size of the droplet affects the magnitude of actuation force. …

    ubc Repository record for Study of droplet splitting in an electrowetting based digital microfluidic system (opens in a new tab) Download PDF for Study of droplet splitting in an electrowetting based digital microfluidic system (opens in a new tab)

  7. Theoretical modeling of the actuation mechanism in integrated induced strain actuator/substructure systems

    … and structures concepts. In order to use the actuation mechanism produced by the integrated induced strain actuators efficiently, the mechanics of the mechanical interaction between the actuator and the host substructure must be understood and modeled accurately. A refined analytical model has …

    vt Repository record for Theoretical modeling of the actuation mechanism in integrated induced strain actuator/substructure systems (opens in a new tab)

  8. Study of the compliance and system integration of bistable structures for use as actuation mechanisms in bioinspired adaptive systems

    Bistable structures are desirable for actuation mechanisms because they allow for the efficient use of actuators by reducing the power required to change and maintain equilibrium positions. There is currently an increased interest in compliant bistable structures, especially for use in the fields …

    uiuc Repository record for Study of the compliance and system integration of bistable structures for use as actuation mechanisms in bioinspired adaptive systems (opens in a new tab)

  9. A torsion pendulum ground test of the LISA Pathfinder Free-fall mode

    … centred inside an orbiting apparatus. The actuation force applied to compensate this effect introduces a dominant source of force noise in the mission noise budget. To suppress this noise source and avoid actuation instabilities, a “free-fall” actuation control scheme has been designed: …

    trento Repository record for A torsion pendulum ground test of the LISA Pathfinder Free-fall mode (opens in a new tab)

  10. Influence of Hygrothermal Conditions of the Bistability of Asymmetric Carbon Fiber Laminate Composites

    Carbon fiber-reinforced polymer (CFRP) laminates have widespread use in many industries because of their exceptional strength-to-weight ratio. Carbon fiber laminates following an asymmetric layup orientation can exhibit bistability meaning the laminate can exist at two stable geometric …

    clemson Repository record for Influence of Hygrothermal Conditions of the Bistability of Asymmetric Carbon Fiber Laminate Composites (opens in a new tab)

  11. Design and Fabrication of Electrostatically Actuated Serpentine-Hinged Nickel-Phosphorous Micromirror Devices

    … was proposed and implemented. Test methods and force applicators for these devices were developed. Following successful fabrication of these devices, a novel process for fabrication of devices out of the plane of the silicon wafer was proposed, so that the devices could be actuated …

    calpoly Repository record for Design and Fabrication of Electrostatically Actuated Serpentine-Hinged Nickel-Phosphorous Micromirror Devices (opens in a new tab)

  12. Bleed-Air Actuation for Lateral and Longitudinal Control of Single-Surface Parafoils

    … integration and control authority of bleed-air actuation in single-surface parafoils. The bleed-air spoiling mechanism provides powerful aerodynamic control on ram-air canopy systems, generating substantial lateral and longitudinal control authority while offering significant size, weight, and …

    gatech Repository record for Bleed-Air Actuation for Lateral and Longitudinal Control of Single-Surface Parafoils (opens in a new tab)

  13. Modeling the pneumatic subsystem of a S-cam air brake system

    … control and diagnostic applications. Current enforcement inspections are done manually and hence are time consuming and subjective. The long-term objective is to develop a model-based, performance-based diagnostic system that will automate enforcement inspections and help in monitoring the …

    tamu Repository record for Modeling the pneumatic subsystem of a S-cam air brake system (opens in a new tab)

  14. ANALYSIS OF THE NONLINEAR VIBRATIONS OF ELECTROSTATICALLY ACTUATED MICRO-CANTILEVERS IN HARMONIC DETECTION OF RESONANCE (HDR)

    … is required. In this work, a fully electrical actuation and detection method is presented, known as the Harmonic Detection of Resonance (HDR). In HDR, harmonic components of the current are measured to determine the cantilever's resonance frequency. These harmonics exist as a result of …

    clemson Repository record for ANALYSIS OF THE NONLINEAR VIBRATIONS OF ELECTROSTATICALLY ACTUATED MICRO-CANTILEVERS IN HARMONIC DETECTION OF RESONANCE (HDR) (opens in a new tab)

  15. The effects of structural and overlay design parameters of membrane switches on the force exerted by users

    … conducted to evaluate the effects on applied force of structural design parameters and feedback conditions inherent in the aesthetic overlay of membrane switch touchpads. In the first experiment, which evaluated structure, 12 males and 12 females keyed 100 4-digit sequences into a computer …

    vt Repository record for The effects of structural and overlay design parameters of membrane switches on the force exerted by users (opens in a new tab)

  16. Design, Optimization, and Experimental Characterization of a Novel Magnetically Actuated Finger Micromanipulator

    … finally, a low ratio of the generated magnetic force to the micromanipulator weight. To overcome these limitations, we designed a novel electromagnetic finger micromanipulator that was adapted from the well-known spherical robot. The design and optimization procedures for building a three Degree …

    waterloo Repository record for Design, Optimization, and Experimental Characterization of a Novel Magnetically Actuated Finger Micromanipulator (opens in a new tab)

  17. Magnetically levitated six degree of freedom micro-machining rotary table

    … table that has one unlimited rotation axis. The actuation force is achieved by the Lorentz force. The underside of the actuator has an axial Halbach array mounted circumferentially near the outside edge. Force is produced in the stator coils which are made using a printed circuit board. The …

    ubc Repository record for Magnetically levitated six degree of freedom micro-machining rotary table (opens in a new tab) Download PDF for Magnetically levitated six degree of freedom micro-machining rotary table (opens in a new tab)

  18. Projectile vibration analysis of an electromagnetic launcher

    … and well proven, but the proposed method for actuation differs in many regards to common methods. Using an EML for actuation provides many advantages over typical actuation methods such as elastics added gravity, pneumatics, or chemical processes. Actuation force can be precisely controlled …

    missouri Repository record for Projectile vibration analysis of an electromagnetic launcher (opens in a new tab)

  19. A Self-Retracting Fully-Compliant Bistable Micromechanism

    … systems have been tested, demonstrating on-chip actuation of bistable mechanisms. Power requirements for these systems are approximately 150 mW. Testing with manual force testers has also been completed and correlates well with finite element modeling. Actuation force is approximately 500 μN for …

    byu Repository record for A Self-Retracting Fully-Compliant Bistable Micromechanism (opens in a new tab) Download PDF for A Self-Retracting Fully-Compliant Bistable Micromechanism (opens in a new tab)

  20. Droplet actuation on various electrode shapes in electrowetting-based microfluidics

    … used in digital microfluidics as a reliable actuation method due to its considerable advantages such as the absence of heat generation, rapid switching response, flexibility, and low power consumption. Research on the improvement of this method has turned into one of the attractive fields in …

    concordia Download PDF for Droplet actuation on various electrode shapes in electrowetting-based microfluidics (opens in a new tab)

Page 1 of 3