Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 691 for “"Additively Manufactured"”.

  1. ADDITIVELY MANUFACTURED LIGHTWEIGHT STEEL STRUCTURES

    Cellular metallic structures find diverse uses in aerospace, automobile and structural applications as lightweight and protective materials. The advent of additive manufacturing, which enables geometrically complex structures fabricated on the micro-scale, in turn constitutes to the popularity of a …

    nus Repository record for ADDITIVELY MANUFACTURED LIGHTWEIGHT STEEL STRUCTURES (opens in a new tab) Download file for ADDITIVELY MANUFACTURED LIGHTWEIGHT STEEL STRUCTURES (opens in a new tab)

  2. ADDITIVELY MANUFACTURED METALLIC CELLULAR STRUCTURES

    … work aimed to investigate the performance of additively manufactured cellular structures for lightweight and sandwich core applications. In the present work, cellular structures were manufactured using an AM technique called laser powder bed fusion (L-PBF). Two L-PBF build parameters, hatch …

    must-thes Repository record for ADDITIVELY MANUFACTURED METALLIC CELLULAR STRUCTURES (opens in a new tab)

  3. Brazing of Additively Manufactured Metals

    The additive manufacture (AM) of metals promises geometrical freedom, but there are limitations with repeatability and cost which hinder its adoption in industry. Within nuclear fusion, AM is seen as a route to create parts from hard-to-manufacture materials and to optimise part geometries, but a …

    whiterose Download PDF for Brazing of Additively Manufactured Metals (opens in a new tab)

  4. Exploration of Additively manufactured Microcellular PLA

    This thesis investigates the 3D printing of Polylactic Acid (PLA) using CO2-saturated filament, comparing it with the solid-state microcellular foaming process. The study examines the impact of various 3D printer nozzle temperatures (180°C to 210°C) and CO2 saturation pressures (1 MPa to 4 MPa) on …

    washington Repository record for Exploration of Additively manufactured Microcellular PLA (opens in a new tab)

  5. Additively Manufactured Hemp Fibers Reinforced Silicone

    … high viscosity. Therefore, behavior of the new manufactured material with varying �ber and solvent composition was analyzed using rheological study to obtain a printable material. The composition containing 15 (wt%) hemp �bers and 20 (wt%) solvent with enhanced mechanical properties displayed …

    concordia Download PDF for Additively Manufactured Hemp Fibers Reinforced Silicone (opens in a new tab)

  6. Additively Manufactured Hemp Fibers Reinforced Silicone

    … high viscosity. Therefore, behavior of the new manufactured material with varying fiber and solvent composition was analyzed using rheological study to obtain a printable material. The composition containing 15 (wt\%) hemp fibers and 20 (wt\%) solvent with enhanced mechanical properties …

    concordia Download PDF for Additively Manufactured Hemp Fibers Reinforced Silicone (opens in a new tab)

  7. Spall Characteristics of Additively Manufactured Stainless Steel

    <p>Additive manufacturing (AM) has rapidly transformed from a novelty prototyping technology into a growing sector of production across a wide range of industries. Much work has been documented in literature to demonstrate the behavior of AM products under static and quasi-static loading …

    utk-theses Repository record for Spall Characteristics of Additively Manufactured Stainless Steel (opens in a new tab)

  8. ADDITIVELY MANUFACTURED LATTICE STRUCTURES FOR ACOUSTIC APPLICATIONS

    … project is to analyse, model, and design additively manufactured lattice structures for sound absorption purposes. Three significant outcomes that substantially advance the study of additively manufactured lattice structures for sound absorption applications were produced through this …

    nus Repository record for ADDITIVELY MANUFACTURED LATTICE STRUCTURES FOR ACOUSTIC APPLICATIONS (opens in a new tab)

  9. Adaptive Additively Manufactured High-Performance Thermal Coatings

    Additive manufacturing techniques have shown promising developments over the past few decades, with their technology continuously improving. As such, other industries such as coating manufacturing can benefit from these new technologies. The research in this dissertation introduces a new additive …

    tamu Repository record for Adaptive Additively Manufactured High-Performance Thermal Coatings (opens in a new tab)

  10. Machining Characteristics of Additively Manufactured A205 Aluminum

    A205 aluminum (Al-Cu-Ag-Mg-TiB2) is an age hardenable AM compatible aluminum alloy recently introduced to the market by Aeromet. Unlike most aluminum alloys which suffer from hot cracking under AM conditions, A205 is hot cracking resistant due to the TiB2 microparticles. To be commercially useful, …

    tamu Repository record for Machining Characteristics of Additively Manufactured A205 Aluminum (opens in a new tab) Embargoed until 2026-12-01

  11. ADDITIVELY MANUFACTURED SPIRALLY CORRUGATED HEAT EXCHANGER TUBES

    … base. To support that goal, this study examines additively manufactured spirally corrugated tubes for use in a seawater-to-feedwater heat exchanger. Ti-6Al-4V was selected as the material for the tubes due to its compatibility with AM technology, corrosion resistance, and strength. Heat …

    nps Repository record for ADDITIVELY MANUFACTURED SPIRALLY CORRUGATED HEAT EXCHANGER TUBES (opens in a new tab)

  12. Precipitation Process in Additively Manufactured Maraging 300

    The precipitation process of maraging 300 steel produced with Laser Powder Bed Fusion, (LPBF), was examined using atom probe tomography. To achieve this, samples were subjected to an aging heat treatment at 500 °C for 15 min, 30 min and 180 min, in addition a sample from the as-built block was also …

    chalmers Repository record for Precipitation Process in Additively Manufactured Maraging 300 (opens in a new tab)

  13. Towards highly fatigue resistant additively manufactured metals

    In the as-built condition, laser powder bed fusion (LPBF) Ni superalloy 718 and electron beam melted (EBM) titanium aluminide (TiAl) have distorted, non-equilibrium structures that have negative consequences for the mechanical properties. These issues can be mitigated through post build heat …

    unsw Repository record for Towards highly fatigue resistant additively manufactured metals (opens in a new tab)

  14. Surface modification of additively manufactured metallic components

    Additive Manufacturing (AM) has revolutionized manufacturing processes by enabling the realization of custom products with intricate geometric features that were either too complex or even intractable for subtractive manufacturing processes. Yet, functional surfaces generated in AM have to be often …

    mcmaster Repository record for Surface modification of additively manufactured metallic components (opens in a new tab)

  15. Multiscale modeling and characterization of additively manufactured materials

    … can be used to infer the elastic properties of additively manufactured (3D printed) materials. Fused deposition modeling 3D printing involves the layer-by-layer extrusion of a filament into a macroscale part that contains microscopic voids between the deposited lines of infill. This thesis …

    texas Repository record for Multiscale modeling and characterization of additively manufactured materials (opens in a new tab)

  16. Modeling the machining mechanics of additively manufactured parts

    Additive manufacturing (AM) enables the production of metallic components with customized geometries and offers solutions for part repair through its layer-by-layer fabrication process. Despite these advantages, AM parts typically require post-machining to achieve the required dimensional accuracy, …

    ubc Repository record for Modeling the machining mechanics of additively manufactured parts (opens in a new tab) Download PDF for Modeling the machining mechanics of additively manufactured parts (opens in a new tab)

  17. Additively-manufactured Deterministic Porous Structures for Transpiration Cooling

    … analytically-defined, repeating 3D geometries. Additively-manufactured metal TPMS structures are already being studied for biomedical applications and it is proposed that they could offer several advantages for transpiration cooling as well: high surface area-to-volume ratio, pore …

    waterloo Repository record for Additively-manufactured Deterministic Porous Structures for Transpiration Cooling (opens in a new tab)

Page 1 of 35