Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 6 of 6 for “"Adhesive joints--Testing"”.

  1. Viscoelastic stress analysis of adhesively bonded joints

    … adherend specimen. Metlbond 1113 and Araldite adhesive properties were used in the linear elastic and viscoelastic analyses, respectively. FM-73 adhesive properties were used in the non-linear viscoelastic analysis. Time-dependent shear moduli were calculated from the results of the latter …

    vt Repository record for Viscoelastic stress analysis of adhesively bonded joints (opens in a new tab)

  2. The development of poly(vinylidene fluoride) piezoelectric sensors for measuring peel stresses in adhesive joints

    … responsible for the failure of most laboratory adhesive joint geometries, the measurement of these stresses has been accomplished only through the use of very sophisticated optical techniques. In order to develop a more versatile measurement technique, poly(vinylidene fluoride) film was used to …

    vt Repository record for The development of poly(vinylidene fluoride) piezoelectric sensors for measuring peel stresses in adhesive joints (opens in a new tab)

  3. Predicting mechanical performance of adhesively bonded joints based on acousto-ultrasonic evaluation and geometric weighting

    Prediction of the performance of adhesively bonded joints is essential to the acceptance of this mode of fastening. In ideal situations where the bonding is uniform throughout the joint the stress distribution depends on the material properties and the joint geometry. Knowledge of the bond …

    vt Repository record for Predicting mechanical performance of adhesively bonded joints based on acousto-ultrasonic evaluation and geometric weighting (opens in a new tab)

  4. Experimental photoelastic strain measurements and numerical simulations on multi-material Pi-/T- joints

    An adhesively bonded Pi-/T-joint is a common ‘out-of-plane’ structural joint that connects a vertical (web) and a horizontal (base) load bearing substrates using an adhesive and a 3D-braided π (pi) preform. The stress-transfer between the substrates and the preform occurs through the adhesive …

    msu