Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 42 for “"Adiabatic heating"”.

  1. Tensile deformation of third generation advanced high strength sheet steels under high strain rates

    … generation AHSS and to understand the effect of adiabatic heating on the austenite to martensite transformation. Four steels were selected for the study: an experimental medium Mn transformation induced plasticity (TRIP) steel (TRIP7Mn), an experimental quenched and partitioned (Q&P) steel …

    colo-mines Repository record for Tensile deformation of third generation advanced high strength sheet steels under high strain rates (opens in a new tab)

  2. Texture evolution of niobium, aluminum, and titanium in Ti-Al-Nb composites processed by accumulative roll bonding

    … during the ARB process as a result of adiabatic heating. In the Al phase, grain refinement occurred with increased ARB cycles as a result of the increased fraction of HAGBs. Strong recrystallization texture occurred for samples subjected to increased ARB cycles as a result of the …

    alabama Repository record for Texture evolution of niobium, aluminum, and titanium in Ti-Al-Nb composites processed by accumulative roll bonding (opens in a new tab)

  3. Shear-based Deformation Processing and Characterization of Electrical Steel Sheet

    … of simple shear, high strain rates, near-adiabatic heating and large hydrostatic pressure in the deformation zone, sheet and foil forms of bulk Fe-Si workpieces are created in a single deformation step.

    purdue-thes Repository record for Shear-based Deformation Processing and Characterization of Electrical Steel Sheet (opens in a new tab)

  4. Investigation of heat transfer in straight and curved rectangular ducts for laminar and transition flows.

    … temperature, with the opposite wall being adiabatic. Heating of the air flowing in the channel was accomplished through Joulean heating of a wall composed of Temsheet. The experiments were conducted for steady state in Laminar and Transition flows. Development and progagation of the …

    nps Repository record for Investigation of heat transfer in straight and curved rectangular ducts for laminar and transition flows. (opens in a new tab)

  5. High Strain Rate Impact Response of Polymeric Materials

    … highly rate-dependent and susceptible to adiabatic heating. At hypervelocity strain rates exceeding 106 s-1, inertial effects, shock waves, and localized thermal softening dominate failure. This dissertation employs the Laser-Induced Projectile Impact Test (LIPIT) to investigate …

    tamu Repository record for High Strain Rate Impact Response of Polymeric Materials (opens in a new tab) Embargoed until 2028-05-01

  6. High Strain Rate Impact Response of Polymeric Materials

    … highly rate-dependent and susceptible to adiabatic heating. At hypervelocity strain rates exceeding 106 s-1, inertial effects, shock waves, and localized thermal softening dominate failure. This dissertation employs the Laser-Induced Projectile Impact Test (LIPIT) to investigate …

    tamu Repository record for High Strain Rate Impact Response of Polymeric Materials (opens in a new tab) Embargoed until 2028-05-01

  7. High Strain Rate Impact Response of Polymeric Materials

    … highly rate-dependent and susceptible to adiabatic heating. At hypervelocity strain rates exceeding 106 s-1, inertial effects, shock waves, and localized thermal softening dominate failure. This dissertation employs the Laser-Induced Projectile Impact Test (LIPIT) to investigate …

    tamu Repository record for High Strain Rate Impact Response of Polymeric Materials (opens in a new tab) Embargoed until 2028-05-01

  8. The effects of isothermal deformation and annealing on the microstructure of nickel-aluminum-bronze propeller material

    … friction result in a combination of frictional heating and adiabatic heating due to plastic deformation. A stirring effect results in the formation of a zone of severe shear deformation and local temperatures approaching 90% of the melting temperature. FSP results in local homogenization of the …

    nps Repository record for The effects of isothermal deformation and annealing on the microstructure of nickel-aluminum-bronze propeller material (opens in a new tab)

  9. Prediction and observation of transformation induced plasticity behavior in CoCrNi multi-principal element alloys with in-situ synchrotron x-ray diffraction

    … temperatures. This is attributed to adiabatic heating effects during high rate deformation. TRIP behavior was also observed in a Co-rich MPEA by in-situ synchrotron x-ray diffraction at the Brazilian Synchrotron Light Laboratory during quasi-static straining at a range of …

    colo-mines Repository record for Prediction and observation of transformation induced plasticity behavior in CoCrNi multi-principal element alloys with in-situ synchrotron x-ray diffraction (opens in a new tab)

  10. MICROTEXTURAL CHARACTERIZATION OF SHEAR TEXTURES IN THE THERMO-MECHANICALLY AFFECTED ZONE OF FRICTION STIR PROCESSED NICKEL ALUMINUM BRONZE

    … of the material by frictional as well as adiabatic heating. The softened regions experience extensive shear deformations resulting in refinement and homogenization of the local microstructure. In essence, FSP can be used to achieve a wrought microstructure from as-cast nickel-aluminum …

    nps Repository record for MICROTEXTURAL CHARACTERIZATION OF SHEAR TEXTURES IN THE THERMO-MECHANICALLY AFFECTED ZONE OF FRICTION STIR PROCESSED NICKEL ALUMINUM BRONZE (opens in a new tab)

  11. High bandwidth cutting force measurement during the cutting of aa 7075-t6 and its application to measure the evolution of flow stress within developing shear bands

    … by ductile damage and/or thermal softening by adiabatic heating. Recent work [1] has shown that the force supported by shear bands induced in hat-shaped test specimens subject to high-speed compression can be measured during the evolution of shear bands. This prompted us to consider whether …

    wichita-thes Repository record for High bandwidth cutting force measurement during the cutting of aa 7075-t6 and its application to measure the evolution of flow stress within developing shear bands (opens in a new tab)

  12. High strain rate, high temperature deformation of stainless steel.

    … dynamic recovery processes, mechanical testing, adiabatic heating and shear band formation. Several series of experiments were carried out, on titanium bearing steel and on an austenitic stainless steel , to determine the reasons of the inversion of the dependence of the strain to the peak in …

    whiterose Download PDF for High strain rate, high temperature deformation of stainless steel. (opens in a new tab)

  13. Deformation mechanisms of pure polycrystalline iron shocked in excess of one megabar pressures

    … iron above 0.013 Mbar did not occur, but instead adiabatic heating due to shock release recrystallized the heavily deformed Ferrite that accommodated the shock via plastic flow. It is possible that the short time scale of the deformation and heating prevented phase transformation during loading, …

    colo-mines Repository record for Deformation mechanisms of pure polycrystalline iron shocked in excess of one megabar pressures (opens in a new tab)

  14. Rate effects on the thermo-mechanical compressive response of conventional and metastable β-Ti alloys

    … modified Kolsky bar with an external furnace for heating and a triple actuation system for precise control. It allows for simultaneous ultra high-speed imaging, 2D digital image correlation, and high-speed thermal imaging. Validation experiments on Ti-6Al-4V showed that the system provides …

    colo-mines Repository record for Rate effects on the thermo-mechanical compressive response of conventional and metastable β-Ti alloys (opens in a new tab)

  15. Ανάπτυξη δεικτών αξιολόγησης και ελέγχου της διεργασίας υπερυψηλής υδροστατικής πίεσης στα τρόφιμα

    … were conducted at isobaric conditions. Adiabatic heating resulted in non isothermal conditions and the recorded temperature varied with treatment time. Temperature gradients were mathematically incorporated into the kinetic models using the effective temperature and equivalent treatment …

    greece Repository record for Ανάπτυξη δεικτών αξιολόγησης και ελέγχου της διεργασίας υπερυψηλής υδροστατικής πίεσης στα τρόφιμα (opens in a new tab)

  16. On the maintenance of blocking anticyclones in a general circulation model

    … perturbations; it is predominately balanced by adiabatic heating in the free troposphere and by diabatic heating near the surface. Transient eddy heat transports act to dissipate the block's thermal perturbations at all levels, while diabatic heating does not exhibit a systematic relationship …

    washington Repository record for On the maintenance of blocking anticyclones in a general circulation model (opens in a new tab)

  17. Study of shear localization using a novel test specimen loaded an a split-Hopkinson compression bar

    … materials, and metallurgical condition. Adiabatic shear bands were generated within AISI Ti-6A1-4V titanium and AISI 4142 steel. AISI 4142 steel also underwent a significant refinement in grain structure. Profuse twinning and strain induced phase transformations were observed within AISI …

    ttu Repository record for Study of shear localization using a novel test specimen loaded an a split-Hopkinson compression bar (opens in a new tab)

  18. Effects of Plastic Deformation From Ultrasonic Additive Manufacturing

    … of dynamic recrystallization, dynamic recovery, adiabatic heating, and precipitate dissolution (as the vacancies allowed enhanced diffusion of elements). Finally, UAM bonding of titanium was analyzed. The HCP phase of titanium significantly resisted plastic deformation, which resulted in a phase …

    utk-theses Repository record for Effects of Plastic Deformation From Ultrasonic Additive Manufacturing (opens in a new tab)

  19. High Pressure Processing of New Zealand Mussels (Perna canaliculus)

    … into account the temperature changes caused by adiabatic heating. Quality study involved determining the effect of HPP parameters on autolytic enzymes associated with enzymatic spoilage in mussels viz. alanine aminopeptidase and lipase enzymes. Based on the desired enzyme activity and Listeria …

    auckland-ms Repository record for High Pressure Processing of New Zealand Mussels (Perna canaliculus) (opens in a new tab)

  20. Interstellar helium pickup ion flux variations observed with SOHO/CELIAS

    … show that compression regions can also cause an adiabatic heating or a shift in the pickup ion velocity distribution.Also investigated is the effect of interplanetary magnetic field fluctuations and waves on pickup ions. These fluctuations can scatter pickup ions, in both pitch angle and energy. …

    unh-thes Repository record for Interstellar helium pickup ion flux variations observed with SOHO/CELIAS (opens in a new tab)

Page 1 of 3